Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29870): Process ended prematurely: osmo-stp_10.42.42.5(pid=29870) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29870)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py ---------------------------------------------- 23:44:08.733232 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:08.744919 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:44:08.897016 tst iperf3.py: using LAC 17576 23:44:09.021660 tst iperf3.py: using RAC 236 23:44:09.146130 tst iperf3.py: using CellId 17576 23:44:09.271153 tst iperf3.py: using BVCI 17577 23:44:09.295677 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.307023 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.318083 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.329664 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.341245 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.352731 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.364444 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.375925 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:44:09.387653 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:44:09.680786 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:44:09.815041 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:44:10.146113 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29862): Launched 23:44:10.422249 run iperf3-srv_10.42.42.10(pid=29863): Launched 23:44:10.620014 tst iperf3.py:8: start network... 23:44:10.754570 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:44:11.269053 run create_hlr_db(pid=29864): Launched 23:44:11.455224 bus /gobi_6: Setting Powered False 23:44:12.475662 run create_hlr_db(pid=29864): Terminated: ok {rc=0} 23:44:12.881569 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29866): Launched 23:44:13.184008 run osmo-hlr_10.42.42.2(pid=29867): Launched 23:44:13.302742 run osmo-stp_10.42.42.5: Starting osmo-stp 23:44:13.836654 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29869): Launched 23:44:14.138542 run osmo-stp_10.42.42.5(pid=29870): Launched 23:44:14.249386 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:44:14.776256 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29872): Launched 23:44:14.884223 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:44:15.147213 run patchelf(pid=29873): Launched 23:44:15.323930 run osmo-stp_10.42.42.5(pid=29870): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29870)] 23:44:15.453254 run osmo-stp_10.42.42.5(pid=29870): stdout: | (launched: 2022-12-08_23:44:13.990329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:44:15.583524 run osmo-stp_10.42.42.5(pid=29870): stderr: | �[0;m�[38;5;43m20221208234414161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208234414162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208234414162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208234414162 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208234414163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208234414163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208234414163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:44:15.708387 run osmo-stp_10.42.42.5(pid=29870): stdout: | (launched: 2022-12-08_23:44:13.990329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:44:15.844244 run osmo-stp_10.42.42.5(pid=29870): stderr: | �[0;m�[38;5;43m20221208234414161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208234414162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208234414162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208234414162 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208234414163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208234414163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208234414163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:44:16.005796 run patchelf(pid=29873): Terminating (SIGINT) 23:44:16.179535 run patchelf(pid=29873): Terminated: ok {rc=0} 23:44:16.211901 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29870): Process ended prematurely: osmo-stp_10.42.42.5(pid=29870) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29870)] [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8] 23:44:16.222180 tst iperf3.py:8: Test FAILED (7.5 sec) 23:44:16.286137 run osmo-hlr_10.42.42.2(pid=29867): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29867)] 23:44:16.337183 run osmo-hlr_10.42.42.2(pid=29867): stdout: | (launched: 2022-12-08_23:44:13.036020) 23:44:16.389590 run osmo-hlr_10.42.42.2(pid=29867): stderr: | �[0;m�[1;31m20221208234413211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208234413211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208234413211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208234413211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208234413211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208234413211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208234413223 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208234413231 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208234413231 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208234413232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:44:16.432634 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29862): Terminating (SIGTERM) 23:44:16.477413 run iperf3-srv_10.42.42.10(pid=29863): Terminating (SIGTERM) 23:44:16.520008 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29866): Terminating (SIGTERM) 23:44:16.561806 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29869): Terminating (SIGTERM) 23:44:16.604786 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29872): Terminating (SIGTERM) 23:44:16.614608 --- ParallelTerminationStrategy: PID 29862 died... 23:44:16.669353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29862): Terminated: ok {rc=0} 23:44:16.680735 --- ParallelTerminationStrategy: PID 29863 died... 23:44:16.736200 run iperf3-srv_10.42.42.10(pid=29863): Terminated {rc=256} 23:44:16.746663 --- ParallelTerminationStrategy: PID 29866 died... 23:44:16.802164 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29866): Terminated: ok {rc=0} 23:44:16.812657 --- ParallelTerminationStrategy: PID 29869 died... 23:44:16.868030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29869): Terminated: ok {rc=0} 23:44:16.878531 --- ParallelTerminationStrategy: PID 29872 died... 23:44:16.934296 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29872): Terminated: ok {rc=0} 23:44:17.018122 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29870): Process ended prematurely: osmo-stp_10.42.42.5(pid=29870) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29870)]