Failed
gprs:nanobts+band-1900.ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=8340): Process ended prematurely: osmo-stp_10.42.42.5(pid=8340) [trial-2352↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8340)]
Standard Output
---------------------------------------------- trial-2352 gprs:nanobts+band-1900 ping.py ---------------------------------------------- 01:44:47.854863 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:47.866043 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:44:47.994759 tst ping.py: using LAC 18205 01:44:48.112252 tst ping.py: using RAC 100 01:44:48.229648 tst ping.py: using CellId 18205 01:44:48.354504 tst ping.py: using BVCI 18206 01:44:48.378912 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.390296 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.401558 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.413295 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.424216 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.435219 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.446355 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:48.457471 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:44:48.730373 tst ping.py:19: start network... 01:44:48.854457 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:44:49.322299 run create_hlr_db(pid=8334): Launched 01:44:49.494182 bus /gobi_6: Setting Powered False 01:44:50.526464 run create_hlr_db(pid=8334): Terminated: ok {rc=0} 01:44:50.950664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8336): Launched 01:44:51.271415 run osmo-hlr_10.42.42.2(pid=8337): Launched 01:44:51.390200 run osmo-stp_10.42.42.5: Starting osmo-stp 01:44:51.949829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8339): Launched 01:44:52.270502 run osmo-stp_10.42.42.5(pid=8340): Launched 01:44:52.386208 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:44:52.946186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8342): Launched 01:44:53.061313 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:44:53.341804 run patchelf(pid=8343): Launched 01:44:53.528884 run osmo-stp_10.42.42.5(pid=8340): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8340)] 01:44:53.665641 run osmo-stp_10.42.42.5(pid=8340): stdout: | (launched: 2022-12-09_01:44:52.112901) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:44:53.802789 run osmo-stp_10.42.42.5(pid=8340): stderr: | �[0;m�[38;5;43m20221209014452303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209014452303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209014452304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209014452304 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209014452304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209014452305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209014452305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:44:53.934808 run osmo-stp_10.42.42.5(pid=8340): stdout: | (launched: 2022-12-09_01:44:52.112901) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:44:54.066021 run osmo-stp_10.42.42.5(pid=8340): stderr: | �[0;m�[38;5;43m20221209014452303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209014452303 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209014452304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209014452304 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209014452304 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209014452305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209014452305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:44:54.218544 run patchelf(pid=8343): Terminating (SIGINT) 01:44:54.397688 run patchelf(pid=8343): Terminated: ok {rc=0} 01:44:54.430018 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8340): Process ended prematurely: osmo-stp_10.42.42.5(pid=8340) [trial-2352↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8340)] [trial-2352↪gprs:nanobts+band-1900↪ping.py:22] 01:44:54.439218 tst ping.py:22: Test FAILED (6.6 sec) 01:44:54.502385 run osmo-hlr_10.42.42.2(pid=8337): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8337)] 01:44:54.553893 run osmo-hlr_10.42.42.2(pid=8337): stdout: | (launched: 2022-12-09_01:44:51.114126) 01:44:54.605800 run osmo-hlr_10.42.42.2(pid=8337): stderr: | �[0;m�[1;31m20221209014451311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209014451311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209014451311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209014451311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209014451311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209014451311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209014451323 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209014451331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209014451332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209014451332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:44:54.650233 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8336): Terminating (SIGTERM) 01:44:54.692077 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8339): Terminating (SIGTERM) 01:44:54.734015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8342): Terminating (SIGTERM) 01:44:54.743764 --- ParallelTerminationStrategy: PID 8336 died... 01:44:54.800100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8336): Terminated: ok {rc=0} 01:44:54.810309 --- ParallelTerminationStrategy: PID 8339 died... 01:44:54.866526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8339): Terminated: ok {rc=0} 01:44:54.876690 --- ParallelTerminationStrategy: PID 8342 died... 01:44:54.932700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8342): Terminated: ok {rc=0} 01:44:55.020821 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8340): Process ended prematurely: osmo-stp_10.42.42.5(pid=8340) [trial-2352↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8340)]