Failed
gprs:oc2g+mod-bts0-dynts-ipa.ping.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4184): Process ended prematurely: osmo-stp_10.42.42.5(pid=4184) [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4184)]
Standard Output
---------------------------------------------- trial-2352 gprs:oc2g+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 00:56:59.871128 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:59.882809 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:57:00.027103 tst ping.py: using LAC 17951 00:57:00.150715 tst ping.py: using RAC 101 00:57:00.267414 tst ping.py: using CellId 17951 00:57:00.385432 tst ping.py: using BVCI 17952 00:57:00.408250 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.419246 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.430091 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.441404 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.452232 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.463204 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.474546 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:57:00.485597 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:57:00.773686 tst ping.py:19: start network... 00:57:00.930880 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:57:01.467467 run create_hlr_db(pid=4178): Launched 00:57:01.658302 bus /gobi_6: Setting Powered False 00:57:02.674425 run create_hlr_db(pid=4178): Terminated: ok {rc=0} 00:57:03.075814 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4180): Launched 00:57:03.373779 run osmo-hlr_10.42.42.2(pid=4181): Launched 00:57:03.490064 run osmo-stp_10.42.42.5: Starting osmo-stp 00:57:04.014844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4183): Launched 00:57:04.312481 run osmo-stp_10.42.42.5(pid=4184): Launched 00:57:04.419863 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:57:04.940094 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4186): Launched 00:57:05.045903 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:57:05.308430 run patchelf(pid=4187): Launched 00:57:05.483318 run osmo-stp_10.42.42.5(pid=4184): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4184)] 00:57:05.611302 run osmo-stp_10.42.42.5(pid=4184): stdout: | (launched: 2022-12-09_00:57:04.165299) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:57:05.740379 run osmo-stp_10.42.42.5(pid=4184): stderr: | �[0;m�[38;5;43m20221209005704337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005704338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005704338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005704338 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005704339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005704339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005704339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:57:05.863797 run osmo-stp_10.42.42.5(pid=4184): stdout: | (launched: 2022-12-09_00:57:04.165299) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:57:05.986267 run osmo-stp_10.42.42.5(pid=4184): stderr: | �[0;m�[38;5;43m20221209005704337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005704338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005704338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005704338 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005704339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005704339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005704339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:57:06.129121 run patchelf(pid=4187): Terminating (SIGINT) 00:57:06.296878 run patchelf(pid=4187): Terminated: ok {rc=0} 00:57:06.327691 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=4184): Process ended prematurely: osmo-stp_10.42.42.5(pid=4184) [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4184)] [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22] 00:57:06.336644 tst ping.py:22: Test FAILED (6.5 sec) 00:57:06.396994 run osmo-hlr_10.42.42.2(pid=4181): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4181)] 00:57:06.445887 run osmo-hlr_10.42.42.2(pid=4181): stdout: | (launched: 2022-12-09_00:57:03.226256) 00:57:06.495567 run osmo-hlr_10.42.42.2(pid=4181): stderr: | �[0;m�[1;31m20221209005703402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209005703402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209005703402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209005703402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209005703402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209005703402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209005703415 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:oc2g+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209005703424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209005703425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209005703425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:57:06.537808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4180): Terminating (SIGTERM) 00:57:06.577795 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4183): Terminating (SIGTERM) 00:57:06.617857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4186): Terminating (SIGTERM) 00:57:06.627360 --- ParallelTerminationStrategy: PID 4180 died... 00:57:06.681196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4180): Terminated: ok {rc=0} 00:57:06.690873 --- ParallelTerminationStrategy: PID 4183 died... 00:57:06.744108 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4183): Terminated: ok {rc=0} 00:57:06.753795 --- ParallelTerminationStrategy: PID 4186 died... 00:57:06.807583 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4186): Terminated: ok {rc=0} 00:57:06.891447 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4184): Process ended prematurely: osmo-stp_10.42.42.5(pid=4184) [trial-2352↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4184)]