Failed
gprs:oc2g+mod-bts0-egprs.iperf3.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4089): Process ended prematurely: osmo-stp_10.42.42.5(pid=4089) [trial-2352↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4089)]
Standard Output
---------------------------------------------- trial-2352 gprs:oc2g+mod-bts0-egprs iperf3.py ---------------------------------------------- 00:55:30.221782 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.233269 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:55:30.363887 tst iperf3.py: using LAC 17944 00:55:30.497289 tst iperf3.py: using RAC 94 00:55:30.623896 tst iperf3.py: using CellId 17944 00:55:30.749062 tst iperf3.py: using BVCI 17945 00:55:30.773867 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.785172 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.796218 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.807327 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.824596 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.845057 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.864134 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.879423 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:55:30.891748 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:55:31.198025 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:55:31.337319 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:55:31.691916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4081): Launched 00:55:31.991646 run iperf3-srv_10.42.42.10(pid=4082): Launched 00:55:32.193825 tst iperf3.py:8: start network... 00:55:32.328376 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:55:32.846632 run create_hlr_db(pid=4083): Launched 00:55:33.033247 bus /gobi_6: Setting Powered False 00:55:34.054541 run create_hlr_db(pid=4083): Terminated: ok {rc=0} 00:55:34.460296 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4085): Launched 00:55:34.765175 run osmo-hlr_10.42.42.2(pid=4086): Launched 00:55:34.882907 run osmo-stp_10.42.42.5: Starting osmo-stp 00:55:35.418001 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4088): Launched 00:55:35.722521 run osmo-stp_10.42.42.5(pid=4089): Launched 00:55:35.833722 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:55:36.364372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4091): Launched 00:55:36.472175 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:55:36.737790 run patchelf(pid=4092): Launched 00:55:36.915035 run osmo-stp_10.42.42.5(pid=4089): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4089)] 00:55:37.044797 run osmo-stp_10.42.42.5(pid=4089): stdout: | (launched: 2022-12-09_00:55:35.571455) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:55:37.174991 run osmo-stp_10.42.42.5(pid=4089): stderr: | �[0;m�[38;5;43m20221209005535742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005535743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005535743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005535743 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005535745 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005535746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005535746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:55:37.300354 run osmo-stp_10.42.42.5(pid=4089): stdout: | (launched: 2022-12-09_00:55:35.571455) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:55:37.424273 run osmo-stp_10.42.42.5(pid=4089): stderr: | �[0;m�[38;5;43m20221209005535742 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005535743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005535743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005535743 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005535745 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005535746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005535746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:55:37.569845 run patchelf(pid=4092): Terminating (SIGINT) 00:55:37.740106 run patchelf(pid=4092): Terminated: ok {rc=0} 00:55:37.771375 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4089): Process ended prematurely: osmo-stp_10.42.42.5(pid=4089) [trial-2352↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4089)] [trial-2352↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8] 00:55:37.780602 tst iperf3.py:8: Test FAILED (7.6 sec) 00:55:37.841736 run osmo-hlr_10.42.42.2(pid=4086): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:oc2g+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4086)] 00:55:37.891423 run osmo-hlr_10.42.42.2(pid=4086): stdout: | (launched: 2022-12-09_00:55:34.613833) 00:55:37.941886 run osmo-hlr_10.42.42.2(pid=4086): stderr: | �[0;m�[1;31m20221209005534793 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209005534793 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209005534793 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209005534793 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209005534793 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209005534793 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209005534805 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:oc2g+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209005534814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209005534814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209005534814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:55:37.984619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4081): Terminating (SIGTERM) 00:55:38.024979 run iperf3-srv_10.42.42.10(pid=4082): Terminating (SIGTERM) 00:55:38.065470 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4085): Terminating (SIGTERM) 00:55:38.105852 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4088): Terminating (SIGTERM) 00:55:38.146125 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4091): Terminating (SIGTERM) 00:55:38.155728 --- ParallelTerminationStrategy: PID 4081 died... 00:55:38.209479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4081): Terminated: ok {rc=0} 00:55:38.219579 --- ParallelTerminationStrategy: PID 4082 died... 00:55:38.273079 run iperf3-srv_10.42.42.10(pid=4082): Terminated {rc=256} 00:55:38.282912 --- ParallelTerminationStrategy: PID 4085 died... 00:55:38.336571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4085): Terminated: ok {rc=0} 00:55:38.346603 --- ParallelTerminationStrategy: PID 4088 died... 00:55:38.400463 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4088): Terminated: ok {rc=0} 00:55:38.410292 --- ParallelTerminationStrategy: PID 4091 died... 00:55:38.464549 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4091): Terminated: ok {rc=0} 00:55:38.553965 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4089): Process ended prematurely: osmo-stp_10.42.42.5(pid=4089) [trial-2352↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4089)]