Failed
gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3269): Process ended prematurely: osmo-stp_10.42.42.5(pid=3269) [trial-2352↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3269)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo+mod-bts0-egprs iperf3.py ---------------------------------------------- 00:47:30.531412 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:30.543128 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:47:30.677730 tst iperf3.py: using LAC 17902 00:47:30.814189 tst iperf3.py: using RAC 52 00:47:30.960287 tst iperf3.py: using CellId 17902 00:47:31.094448 tst iperf3.py: using BVCI 17903 00:47:31.119748 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.131905 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.143871 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.157762 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.170684 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.182572 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.195913 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.209962 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:31.223161 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:47:31.605400 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:47:31.740073 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:32.112338 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3259): Launched 00:47:32.384253 run iperf3-srv_10.42.42.10(pid=3260): Launched 00:47:32.574243 tst iperf3.py:8: start network... 00:47:32.703834 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:47:33.197082 run create_hlr_db(pid=3261): Launched 00:47:33.376530 bus /gobi_6: Setting Powered False 00:47:34.395927 run create_hlr_db(pid=3261): Terminated: ok {rc=0} 00:47:34.811475 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3263): Launched 00:47:35.124682 run osmo-hlr_10.42.42.2(pid=3264): Launched 00:47:35.246356 run osmo-stp_10.42.42.5: Starting osmo-stp 00:47:35.810376 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3266): Launched 00:47:36.140805 run osmo-stp_10.42.42.5(pid=3269): Launched 00:47:36.254967 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:47:36.799350 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3271): Launched 00:47:36.910484 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:47:37.203583 run patchelf(pid=3272): Launched 00:47:37.399380 run osmo-stp_10.42.42.5(pid=3269): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3269)] 00:47:37.542492 run osmo-stp_10.42.42.5(pid=3269): stdout: | (launched: 2022-12-09_00:47:35.980031) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:37.685776 run osmo-stp_10.42.42.5(pid=3269): stderr: | �[0;m�[38;5;43m20221209004736155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004736155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004736155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004736155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004736158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004736158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004736158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:37.824301 run osmo-stp_10.42.42.5(pid=3269): stdout: | (launched: 2022-12-09_00:47:35.980031) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:37.961423 run osmo-stp_10.42.42.5(pid=3269): stderr: | �[0;m�[38;5;43m20221209004736155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004736155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004736155 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004736155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004736158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004736158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004736158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:38.120686 run patchelf(pid=3272): Terminating (SIGINT) 00:47:38.308577 run patchelf(pid=3272): Terminated: ok {rc=0} 00:47:38.342876 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3269): Process ended prematurely: osmo-stp_10.42.42.5(pid=3269) [trial-2352↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3269)] [trial-2352↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8] 00:47:38.352785 tst iperf3.py:8: Test FAILED (7.9 sec) 00:47:38.416676 run osmo-hlr_10.42.42.2(pid=3264): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3264)] 00:47:38.468643 run osmo-hlr_10.42.42.2(pid=3264): stdout: | (launched: 2022-12-09_00:47:34.969397) 00:47:38.520923 run osmo-hlr_10.42.42.2(pid=3264): stderr: | �[0;m�[1;31m20221209004735149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209004735149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209004735149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209004735149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209004735149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209004735149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209004735162 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209004735170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209004735170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209004735170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:47:38.565766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3259): Terminating (SIGTERM) 00:47:38.607804 run iperf3-srv_10.42.42.10(pid=3260): Terminating (SIGTERM) 00:47:38.650064 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3263): Terminating (SIGTERM) 00:47:38.691987 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3266): Terminating (SIGTERM) 00:47:38.734274 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3271): Terminating (SIGTERM) 00:47:38.743952 --- ParallelTerminationStrategy: PID 3259 died... 00:47:38.800176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3259): Terminated: ok {rc=0} 00:47:38.810339 --- ParallelTerminationStrategy: PID 3260 died... 00:47:38.866127 run iperf3-srv_10.42.42.10(pid=3260): Terminated {rc=256} 00:47:38.876094 --- ParallelTerminationStrategy: PID 3263 died... 00:47:38.932102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3263): Terminated: ok {rc=0} 00:47:38.942215 --- ParallelTerminationStrategy: PID 3266 died... 00:47:38.998826 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3266): Terminated: ok {rc=0} 00:47:39.009056 --- ParallelTerminationStrategy: PID 3271 died... 00:47:39.065237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3271): Terminated: ok {rc=0} 00:47:39.152890 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3269): Process ended prematurely: osmo-stp_10.42.42.5(pid=3269) [trial-2352↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3269)]