Failed
gprs:trx-b200+mod-bts0-egprs.iperf3.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4695): Process ended prematurely: osmo-stp_10.42.42.5(pid=4695) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4695)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200+mod-bts0-egprs iperf3.py ---------------------------------------------- 01:04:06.688903 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:06.700736 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:04:06.848885 tst iperf3.py: using LAC 17990 01:04:06.977241 tst iperf3.py: using RAC 140 01:04:07.107580 tst iperf3.py: using CellId 17990 01:04:07.240485 tst iperf3.py: using BVCI 17991 01:04:07.265725 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.277057 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.288050 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.299146 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.310252 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.321284 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.332441 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.343589 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:07.354832 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:04:07.648740 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:04:07.785804 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:04:08.128309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4687): Launched 01:04:08.412172 run iperf3-srv_10.42.42.10(pid=4688): Launched 01:04:08.613825 tst iperf3.py:8: start network... 01:04:08.750792 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:04:09.275140 run create_hlr_db(pid=4689): Launched 01:04:09.464645 bus /gobi_6: Setting Powered False 01:04:10.484625 run create_hlr_db(pid=4689): Terminated: ok {rc=0} 01:04:10.895650 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4691): Launched 01:04:11.202009 run osmo-hlr_10.42.42.2(pid=4692): Launched 01:04:11.314753 run osmo-stp_10.42.42.5: Starting osmo-stp 01:04:11.848267 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4694): Launched 01:04:12.153389 run osmo-stp_10.42.42.5(pid=4695): Launched 01:04:12.264814 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:04:12.799742 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4697): Launched 01:04:12.908368 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:04:13.174807 run patchelf(pid=4698): Launched 01:04:13.353726 run osmo-stp_10.42.42.5(pid=4695): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4695)] 01:04:13.484502 run osmo-stp_10.42.42.5(pid=4695): stdout: | (launched: 2022-12-09_01:04:12.002994) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:13.615409 run osmo-stp_10.42.42.5(pid=4695): stderr: | �[0;m�[38;5;43m20221209010412174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010412174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010412174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010412174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010412177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010412177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010412177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:13.741985 run osmo-stp_10.42.42.5(pid=4695): stdout: | (launched: 2022-12-09_01:04:12.002994) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:13.866788 run osmo-stp_10.42.42.5(pid=4695): stderr: | �[0;m�[38;5;43m20221209010412174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010412174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010412174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010412174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010412177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010412177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010412177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:14.012257 run patchelf(pid=4698): Terminating (SIGINT) 01:04:14.183623 run patchelf(pid=4698): Terminated: ok {rc=0} 01:04:14.215088 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4695): Process ended prematurely: osmo-stp_10.42.42.5(pid=4695) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4695)] [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8] 01:04:14.224375 tst iperf3.py:8: Test FAILED (7.6 sec) 01:04:14.285627 run osmo-hlr_10.42.42.2(pid=4692): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4692)] 01:04:14.335302 run osmo-hlr_10.42.42.2(pid=4692): stdout: | (launched: 2022-12-09_01:04:11.050158) 01:04:14.385795 run osmo-hlr_10.42.42.2(pid=4692): stderr: | �[0;m�[1;31m20221209010411231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010411231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010411231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010411231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010411231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010411231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010411243 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010411253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010411253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010411253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:04:14.428418 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4687): Terminating (SIGTERM) 01:04:14.468768 run iperf3-srv_10.42.42.10(pid=4688): Terminating (SIGTERM) 01:04:14.509781 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4691): Terminating (SIGTERM) 01:04:14.550080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4694): Terminating (SIGTERM) 01:04:14.590270 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4697): Terminating (SIGTERM) 01:04:14.599744 --- ParallelTerminationStrategy: PID 4687 died... 01:04:14.653503 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4687): Terminated: ok {rc=0} 01:04:14.663571 --- ParallelTerminationStrategy: PID 4688 died... 01:04:14.717018 run iperf3-srv_10.42.42.10(pid=4688): Terminated {rc=256} 01:04:14.726857 --- ParallelTerminationStrategy: PID 4691 died... 01:04:14.780754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4691): Terminated: ok {rc=0} 01:04:14.790584 --- ParallelTerminationStrategy: PID 4694 died... 01:04:14.843990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4694): Terminated: ok {rc=0} 01:04:14.853840 --- ParallelTerminationStrategy: PID 4697 died... 01:04:14.907277 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4697): Terminated: ok {rc=0} 01:04:14.995865 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4695): Process ended prematurely: osmo-stp_10.42.42.5(pid=4695) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4695)]