Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 214 builds (Since #2139 )

Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=4901): Process ended prematurely: osmo-stp_10.42.42.5(pid=4901) [trial-2352↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4901)]

Standard Output

----------------------------------------------
trial-2352 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
01:07:07.680866 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:07.693477 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
01:07:07.846653 tst                        iperf3.py: using LAC 18005
01:07:07.975339 tst                        iperf3.py: using RAC 155
01:07:08.105548 tst                        iperf3.py: using CellId 18005
01:07:08.235618 tst                        iperf3.py: using BVCI 18006
01:07:08.260833 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.272588 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.284060 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.295584 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.307095 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.318678 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.330959 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.342550 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:08.354636 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
01:07:08.635227 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:07:08.763580 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:07:09.083423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4893): Launched
01:07:09.348570 run iperf3-srv_10.42.42.10(pid=4894): Launched
01:07:09.535342 tst                      iperf3.py:8: start network...
01:07:09.663070 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:07:10.147662 run          create_hlr_db(pid=4895): Launched
01:07:10.324185 bus                          /gobi_6: Setting Powered False
01:07:11.345962 run          create_hlr_db(pid=4895): Terminated: ok {rc=0}
01:07:11.782575 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4897): Launched
01:07:12.112052 run    osmo-hlr_10.42.42.2(pid=4898): Launched
01:07:12.234966 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:07:12.808745 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4900): Launched
01:07:13.140826 run    osmo-stp_10.42.42.5(pid=4901): Launched
01:07:13.261414 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:07:13.837176 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4903): Launched
01:07:13.954690 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:07:14.241988 run               patchelf(pid=4904): Launched
01:07:14.435115 run    osmo-stp_10.42.42.5(pid=4901): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4901)]
01:07:14.576402 run    osmo-stp_10.42.42.5(pid=4901): stdout: 
| (launched: 2022-12-09_01:07:12.977408)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:07:14.717865 run    osmo-stp_10.42.42.5(pid=4901): stderr: 
| �[0;m�[38;5;43m20221209010713168 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209010713169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209010713169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209010713169 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209010713170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209010713170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209010713170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:07:14.854035 run    osmo-stp_10.42.42.5(pid=4901): stdout: 
| (launched: 2022-12-09_01:07:12.977408)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:07:14.989323 run    osmo-stp_10.42.42.5(pid=4901): stderr: 
| �[0;m�[38;5;43m20221209010713168 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209010713169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209010713169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209010713169 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209010713170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209010713170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209010713170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:07:15.147161 run               patchelf(pid=4904): Terminating (SIGINT)
01:07:15.331745 run               patchelf(pid=4904): Terminated: ok {rc=0}
01:07:15.365650 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4901): Process ended prematurely: osmo-stp_10.42.42.5(pid=4901) [trial-2352↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4901)]  [trial-2352↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
01:07:15.375480 tst                      iperf3.py:8: Test FAILED (7.7 sec)
01:07:15.439130 run    osmo-hlr_10.42.42.2(pid=4898): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4898)]
01:07:15.491000 run    osmo-hlr_10.42.42.2(pid=4898): stdout: 
| (launched: 2022-12-09_01:07:11.950434) 
01:07:15.543494 run    osmo-hlr_10.42.42.2(pid=4898): stderr: 
| �[0;m�[1;31m20221209010712148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209010712148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209010712148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209010712148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209010712148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209010712148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209010712160 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209010712171 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209010712171 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209010712171 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:07:15.588386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4893): Terminating (SIGTERM)
01:07:15.630546 run iperf3-srv_10.42.42.10(pid=4894): Terminating (SIGTERM)
01:07:15.672760 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4897): Terminating (SIGTERM)
01:07:15.714922 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4900): Terminating (SIGTERM)
01:07:15.757166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4903): Terminating (SIGTERM)
01:07:15.766933 ---      ParallelTerminationStrategy: PID 4893 died...
01:07:15.823672 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4893): Terminated: ok {rc=0}
01:07:15.834281 ---      ParallelTerminationStrategy: PID 4894 died...
01:07:15.896686 run iperf3-srv_10.42.42.10(pid=4894): Terminated {rc=256}
01:07:15.908635 ---      ParallelTerminationStrategy: PID 4897 died...
01:07:15.970619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4897): Terminated: ok {rc=0}
01:07:15.981156 ---      ParallelTerminationStrategy: PID 4900 died...
01:07:16.038399 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4900): Terminated: ok {rc=0}
01:07:16.048909 ---      ParallelTerminationStrategy: PID 4903 died...
01:07:16.106399 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4903): Terminated: ok {rc=0}
01:07:16.195727 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4901): Process ended prematurely: osmo-stp_10.42.42.5(pid=4901) [trial-2352↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4901)]