Failed
gprs:trx-lms+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7123): Process ended prematurely: osmo-stp_10.42.42.5(pid=7123) [trial-2352↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7123)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-lms+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 01:31:16.730966 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:16.747692 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:31:16.926304 tst iperf3.py: using LAC 18133 01:31:17.059826 tst iperf3.py: using RAC 28 01:31:17.183307 tst iperf3.py: using CellId 18133 01:31:17.305216 tst iperf3.py: using BVCI 18134 01:31:17.329033 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.340426 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.351738 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.364250 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.375884 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.386844 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.398599 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.410827 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:31:17.422830 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:31:17.718688 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:31:17.854211 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:31:18.192463 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7115): Launched 01:31:18.473298 run iperf3-srv_10.42.42.10(pid=7116): Launched 01:31:18.673879 tst iperf3.py:8: start network... 01:31:18.809808 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:31:19.329326 run create_hlr_db(pid=7117): Launched 01:31:19.517329 bus /gobi_6: Setting Powered False 01:31:20.537943 run create_hlr_db(pid=7117): Terminated: ok {rc=0} 01:31:20.946308 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7119): Launched 01:31:21.250323 run osmo-hlr_10.42.42.2(pid=7120): Launched 01:31:21.365662 run osmo-stp_10.42.42.5: Starting osmo-stp 01:31:21.895296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7122): Launched 01:31:22.200077 run osmo-stp_10.42.42.5(pid=7123): Launched 01:31:22.311512 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:31:22.842877 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7125): Launched 01:31:22.950708 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:31:23.215678 run patchelf(pid=7126): Launched 01:31:23.394261 run osmo-stp_10.42.42.5(pid=7123): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7123)] 01:31:23.524616 run osmo-stp_10.42.42.5(pid=7123): stdout: | (launched: 2022-12-09_01:31:22.049202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:31:23.655920 run osmo-stp_10.42.42.5(pid=7123): stderr: | �[0;m�[38;5;43m20221209013122220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013122220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013122220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013122220 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013122221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013122221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013122221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:31:23.782111 run osmo-stp_10.42.42.5(pid=7123): stdout: | (launched: 2022-12-09_01:31:22.049202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:31:23.906997 run osmo-stp_10.42.42.5(pid=7123): stderr: | �[0;m�[38;5;43m20221209013122220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013122220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013122220 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013122220 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013122221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013122221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013122221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:31:24.052599 run patchelf(pid=7126): Terminating (SIGINT) 01:31:24.224000 run patchelf(pid=7126): Terminated: ok {rc=0} 01:31:24.255468 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7123): Process ended prematurely: osmo-stp_10.42.42.5(pid=7123) [trial-2352↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7123)] [trial-2352↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8] 01:31:24.264683 tst iperf3.py:8: Test FAILED (7.6 sec) 01:31:24.326421 run osmo-hlr_10.42.42.2(pid=7120): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7120)] 01:31:24.376380 run osmo-hlr_10.42.42.2(pid=7120): stdout: | (launched: 2022-12-09_01:31:21.099970) 01:31:24.426774 run osmo-hlr_10.42.42.2(pid=7120): stderr: | �[0;m�[1;31m20221209013121277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209013121277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209013121277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209013121277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209013121277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209013121277 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209013121291 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209013121299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209013121299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209013121299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:31:24.469782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7115): Terminating (SIGTERM) 01:31:24.509816 run iperf3-srv_10.42.42.10(pid=7116): Terminating (SIGTERM) 01:31:24.550378 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7119): Terminating (SIGTERM) 01:31:24.590646 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7122): Terminating (SIGTERM) 01:31:24.631082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7125): Terminating (SIGTERM) 01:31:24.640499 --- ParallelTerminationStrategy: PID 7115 died... 01:31:24.694950 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7115): Terminated: ok {rc=0} 01:31:24.704884 --- ParallelTerminationStrategy: PID 7116 died... 01:31:24.758645 run iperf3-srv_10.42.42.10(pid=7116): Terminated {rc=256} 01:31:24.768596 --- ParallelTerminationStrategy: PID 7119 died... 01:31:24.822395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7119): Terminated: ok {rc=0} 01:31:24.832363 --- ParallelTerminationStrategy: PID 7122 died... 01:31:24.886376 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7122): Terminated: ok {rc=0} 01:31:24.896194 --- ParallelTerminationStrategy: PID 7125 died... 01:31:24.949703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7125): Terminated: ok {rc=0} 01:31:25.038346 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7123): Process ended prematurely: osmo-stp_10.42.42.5(pid=7123) [trial-2352↪gprs:trx-lms+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7123)]