Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7192): Process ended prematurely: osmo-stp_10.42.42.5(pid=7192) [trial-2352↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7192)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 01:32:16.844370 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:16.856761 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:32:17.024419 tst iperf3.py: using LAC 18138 01:32:17.167415 tst iperf3.py: using RAC 33 01:32:17.295310 tst iperf3.py: using CellId 18138 01:32:17.424336 tst iperf3.py: using BVCI 18139 01:32:17.449332 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.460543 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.471630 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.482754 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.493731 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.504799 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.515993 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.526982 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:32:17.538128 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:32:17.833503 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:32:17.968879 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:32:18.305744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7184): Launched 01:32:18.585071 run iperf3-srv_10.42.42.10(pid=7185): Launched 01:32:18.784531 tst iperf3.py:8: start network... 01:32:18.919894 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:32:19.440607 run create_hlr_db(pid=7186): Launched 01:32:19.628553 bus /gobi_6: Setting Powered False 01:32:20.638834 run create_hlr_db(pid=7186): Terminated: ok {rc=0} 01:32:21.079779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7188): Launched 01:32:21.406074 run osmo-hlr_10.42.42.2(pid=7189): Launched 01:32:21.524608 run osmo-stp_10.42.42.5: Starting osmo-stp 01:32:22.091754 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7191): Launched 01:32:22.418053 run osmo-stp_10.42.42.5(pid=7192): Launched 01:32:22.536779 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:32:23.107456 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7194): Launched 01:32:23.223107 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:32:23.506123 run patchelf(pid=7195): Launched 01:32:23.697211 run osmo-stp_10.42.42.5(pid=7192): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7192)] 01:32:23.836900 run osmo-stp_10.42.42.5(pid=7192): stdout: | (launched: 2022-12-09_01:32:22.257050) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:32:23.976626 run osmo-stp_10.42.42.5(pid=7192): stderr: | �[0;m�[38;5;43m20221209013222448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013222448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013222449 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013222449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013222450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013222450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013222450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:32:24.111238 run osmo-stp_10.42.42.5(pid=7192): stdout: | (launched: 2022-12-09_01:32:22.257050) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:32:24.244232 run osmo-stp_10.42.42.5(pid=7192): stderr: | �[0;m�[38;5;43m20221209013222448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013222448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013222449 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013222449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013222450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013222450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013222450 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:32:24.399833 run patchelf(pid=7195): Terminating (SIGINT) 01:32:24.582181 run patchelf(pid=7195): Terminated: ok {rc=0} 01:32:24.615540 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7192): Process ended prematurely: osmo-stp_10.42.42.5(pid=7192) [trial-2352↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7192)] [trial-2352↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 01:32:24.625270 tst iperf3.py:8: Test FAILED (7.8 sec) 01:32:24.688824 run osmo-hlr_10.42.42.2(pid=7189): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7189)] 01:32:24.740383 run osmo-hlr_10.42.42.2(pid=7189): stdout: | (launched: 2022-12-09_01:32:21.245414) 01:32:24.792434 run osmo-hlr_10.42.42.2(pid=7189): stderr: | �[0;m�[1;31m20221209013221443 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209013221443 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209013221444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209013221444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209013221444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209013221444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209013221456 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209013221465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209013221465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209013221465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:32:24.836713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7184): Terminating (SIGTERM) 01:32:24.878409 run iperf3-srv_10.42.42.10(pid=7185): Terminating (SIGTERM) 01:32:24.919988 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7188): Terminating (SIGTERM) 01:32:24.961773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7191): Terminating (SIGTERM) 01:32:25.003745 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7194): Terminating (SIGTERM) 01:32:25.013600 --- ParallelTerminationStrategy: PID 7184 died... 01:32:25.069962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7184): Terminated: ok {rc=0} 01:32:25.080147 --- ParallelTerminationStrategy: PID 7185 died... 01:32:25.136089 run iperf3-srv_10.42.42.10(pid=7185): Terminated {rc=256} 01:32:25.146217 --- ParallelTerminationStrategy: PID 7188 died... 01:32:25.202047 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7188): Terminated: ok {rc=0} 01:32:25.212138 --- ParallelTerminationStrategy: PID 7191 died... 01:32:25.267799 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7191): Terminated: ok {rc=0} 01:32:25.277939 --- ParallelTerminationStrategy: PID 7194 died... 01:32:25.333606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7194): Terminated: ok {rc=0} 01:32:25.420024 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7192): Process ended prematurely: osmo-stp_10.42.42.5(pid=7192) [trial-2352↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7192)]