Failed

gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)

Failing for the past 214 builds (Since #2139 )

Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8020): Process ended prematurely: osmo-stp_10.42.42.5(pid=8020) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8020)]

Standard Output

----------------------------------------------
trial-2352 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
01:40:09.300916 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.312564 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
01:40:09.466427 tst                        iperf3.py: using LAC 18180
01:40:09.584093 tst                        iperf3.py: using RAC 75
01:40:09.705600 tst                        iperf3.py: using CellId 18180
01:40:09.823269 tst                        iperf3.py: using BVCI 18181
01:40:09.846395 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.857525 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.868320 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.879406 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.890492 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.901594 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.912788 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.923733 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:40:09.935005 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:40:10.228637 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:40:10.363772 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:40:10.697875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8012): Launched
01:40:10.978285 run iperf3-srv_10.42.42.10(pid=8013): Launched
01:40:11.170416 tst                      iperf3.py:8: start network...
01:40:11.296494 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:40:11.772159 run          create_hlr_db(pid=8014): Launched
01:40:11.946598 bus                          /gobi_6: Setting Powered False
01:40:12.966812 run          create_hlr_db(pid=8014): Terminated: ok {rc=0}
01:40:13.396549 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8016): Launched
01:40:13.719915 run    osmo-hlr_10.42.42.2(pid=8017): Launched
01:40:13.840552 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:40:14.405170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8019): Launched
01:40:14.730917 run    osmo-stp_10.42.42.5(pid=8020): Launched
01:40:14.849068 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:40:15.414344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8022): Launched
01:40:15.529414 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:40:15.811397 run               patchelf(pid=8023): Launched
01:40:16.013724 run    osmo-stp_10.42.42.5(pid=8020): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8020)]
01:40:16.148645 run    osmo-stp_10.42.42.5(pid=8020): stdout: 
| (launched: 2022-12-09_01:40:14.570129)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:40:16.283082 run    osmo-stp_10.42.42.5(pid=8020): stderr: 
| �[0;m�[38;5;43m20221209014014763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209014014763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209014014763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209014014764 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:40:16.414078 run    osmo-stp_10.42.42.5(pid=8020): stdout: 
| (launched: 2022-12-09_01:40:14.570129)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:40:16.552000 run    osmo-stp_10.42.42.5(pid=8020): stderr: 
| �[0;m�[38;5;43m20221209014014763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209014014763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209014014763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209014014764 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014014764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:40:16.703066 run               patchelf(pid=8023): Terminating (SIGINT)
01:40:16.879753 run               patchelf(pid=8023): Terminated: ok {rc=0}
01:40:16.912544 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8020): Process ended prematurely: osmo-stp_10.42.42.5(pid=8020) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8020)]  [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8]
01:40:16.923204 tst                      iperf3.py:8: Test FAILED (7.7 sec)
01:40:16.989803 run    osmo-hlr_10.42.42.2(pid=8017): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8017)]
01:40:17.043731 run    osmo-hlr_10.42.42.2(pid=8017): stdout: 
| (launched: 2022-12-09_01:40:13.561206) 
01:40:17.096694 run    osmo-hlr_10.42.42.2(pid=8017): stderr: 
| �[0;m�[1;31m20221209014013760 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209014013760 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209014013761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209014013761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209014013761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209014013761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209014013772 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209014013780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209014013780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209014013780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:40:17.143080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8012): Terminating (SIGTERM)
01:40:17.186401 run iperf3-srv_10.42.42.10(pid=8013): Terminating (SIGTERM)
01:40:17.234151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8016): Terminating (SIGTERM)
01:40:17.278387 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8019): Terminating (SIGTERM)
01:40:17.321131 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8022): Terminating (SIGTERM)
01:40:17.330846 ---      ParallelTerminationStrategy: PID 8012 died...
01:40:17.387146 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8012): Terminated: ok {rc=0}
01:40:17.397326 ---      ParallelTerminationStrategy: PID 8013 died...
01:40:17.453349 run iperf3-srv_10.42.42.10(pid=8013): Terminated {rc=256}
01:40:17.463391 ---      ParallelTerminationStrategy: PID 8016 died...
01:40:17.520082 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8016): Terminated: ok {rc=0}
01:40:17.530269 ---      ParallelTerminationStrategy: PID 8019 died...
01:40:17.586602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8019): Terminated: ok {rc=0}
01:40:17.596794 ---      ParallelTerminationStrategy: PID 8022 died...
01:40:17.653424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8022): Terminated: ok {rc=0}
01:40:17.741839 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8020): Process ended prematurely: osmo-stp_10.42.42.5(pid=8020) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8020)]