Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 214 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5725): Process ended prematurely: osmo-stp_10.42.42.5(pid=5725) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5725)]

Standard Output

----------------------------------------------
trial-2352 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
01:15:03.498568 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:03.510859 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
01:15:03.682209 tst                        iperf3.py: using LAC 18047
01:15:03.810223 tst                        iperf3.py: using RAC 197
01:15:03.938183 tst                        iperf3.py: using CellId 18047
01:15:04.066531 tst                        iperf3.py: using BVCI 18048
01:15:04.091766 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.103301 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.114711 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.126114 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.137494 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.148856 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.160279 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.171845 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:15:04.183469 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:15:04.468553 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:15:04.596170 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:15:04.914760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5717): Launched
01:15:05.180028 run iperf3-srv_10.42.42.10(pid=5718): Launched
01:15:05.367774 tst                      iperf3.py:8: start network...
01:15:05.495558 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:15:05.979820 run          create_hlr_db(pid=5719): Launched
01:15:06.156581 bus                          /gobi_6: Setting Powered False
01:15:07.177623 run          create_hlr_db(pid=5719): Terminated: ok {rc=0}
01:15:07.615622 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5721): Launched
01:15:07.946735 run    osmo-hlr_10.42.42.2(pid=5722): Launched
01:15:08.066902 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:15:08.642161 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5724): Launched
01:15:08.973736 run    osmo-stp_10.42.42.5(pid=5725): Launched
01:15:09.093038 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:15:09.669553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5727): Launched
01:15:09.787262 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:15:10.075464 run               patchelf(pid=5728): Launched
01:15:10.269581 run    osmo-stp_10.42.42.5(pid=5725): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5725)]
01:15:10.411255 run    osmo-stp_10.42.42.5(pid=5725): stdout: 
| (launched: 2022-12-09_01:15:08.809995)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:15:10.552543 run    osmo-stp_10.42.42.5(pid=5725): stderr: 
| �[0;m�[38;5;43m20221209011509002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209011509002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209011509002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209011509003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209011509004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209011509004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209011509004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:15:10.689484 run    osmo-stp_10.42.42.5(pid=5725): stdout: 
| (launched: 2022-12-09_01:15:08.809995)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:15:10.825074 run    osmo-stp_10.42.42.5(pid=5725): stderr: 
| �[0;m�[38;5;43m20221209011509002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209011509002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209011509002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209011509003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209011509004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209011509004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209011509004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:15:10.983345 run               patchelf(pid=5728): Terminating (SIGINT)
01:15:11.169090 run               patchelf(pid=5728): Terminated: ok {rc=0}
01:15:11.203094 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5725): Process ended prematurely: osmo-stp_10.42.42.5(pid=5725) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5725)]  [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
01:15:11.213121 tst                      iperf3.py:8: Test FAILED (7.7 sec)
01:15:11.277016 run    osmo-hlr_10.42.42.2(pid=5722): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5722)]
01:15:11.329061 run    osmo-hlr_10.42.42.2(pid=5722): stdout: 
| (launched: 2022-12-09_01:15:07.783652) 
01:15:11.381813 run    osmo-hlr_10.42.42.2(pid=5722): stderr: 
| �[0;m�[1;31m20221209011507981 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209011507982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209011507982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209011507982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209011507982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209011507982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209011507994 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209011508005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209011508006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209011508006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:15:11.427060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5717): Terminating (SIGTERM)
01:15:11.469743 run iperf3-srv_10.42.42.10(pid=5718): Terminating (SIGTERM)
01:15:11.512451 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5721): Terminating (SIGTERM)
01:15:11.555040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5724): Terminating (SIGTERM)
01:15:11.597834 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5727): Terminating (SIGTERM)
01:15:11.607690 ---      ParallelTerminationStrategy: PID 5717 died...
01:15:11.664625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5717): Terminated: ok {rc=0}
01:15:11.674950 ---      ParallelTerminationStrategy: PID 5718 died...
01:15:11.731617 run iperf3-srv_10.42.42.10(pid=5718): Terminated {rc=256}
01:15:11.741768 ---      ParallelTerminationStrategy: PID 5721 died...
01:15:11.798110 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5721): Terminated: ok {rc=0}
01:15:11.808368 ---      ParallelTerminationStrategy: PID 5724 died...
01:15:11.864643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5724): Terminated: ok {rc=0}
01:15:11.874845 ---      ParallelTerminationStrategy: PID 5727 died...
01:15:11.931158 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5727): Terminated: ok {rc=0}
01:15:12.019877 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5725): Process ended prematurely: osmo-stp_10.42.42.5(pid=5725) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5725)]