Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 23 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10718): Process ended prematurely: osmo-stp_10.42.42.5(pid=10718) [trial-2353↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10718)]

Standard Output

----------------------------------------------
trial-2353 gprs:sysmo ping_idle_ping.py
----------------------------------------------
02:14:41.801479 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:41.813718 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
02:14:41.949625 tst                ping_idle_ping.py: using LAC 18361
02:14:42.080639 tst                ping_idle_ping.py: using RAC 1
02:14:42.209596 tst                ping_idle_ping.py: using CellId 18361
02:14:42.340661 tst                ping_idle_ping.py: using BVCI 18362
02:14:42.365993 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.377290 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.389128 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.400101 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.411281 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.422472 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.433722 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:42.445098 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
02:14:42.734046 tst             ping_idle_ping.py:24: start network...
02:14:42.861634 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:14:43.355082 run         create_hlr_db(pid=10712): Launched
02:14:43.530575 bus                          /gobi_6: Setting Powered False
02:14:44.551601 run         create_hlr_db(pid=10712): Terminated: ok {rc=0}
02:14:44.988354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10714): Launched
02:14:45.318936 run   osmo-hlr_10.42.42.2(pid=10715): Launched
02:14:45.438329 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:14:46.031326 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10717): Launched
02:14:46.418479 run   osmo-stp_10.42.42.5(pid=10718): Launched
02:14:46.556608 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:14:47.233605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10720): Launched
02:14:47.355359 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:14:47.645883 run              patchelf(pid=10721): Launched
02:14:47.838164 run   osmo-stp_10.42.42.5(pid=10718): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10718)]
02:14:47.979498 run   osmo-stp_10.42.42.5(pid=10718): stdout: 
| (launched: 2022-12-09_02:14:46.201795)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:14:48.120547 run   osmo-stp_10.42.42.5(pid=10718): stderr: 
| �[0;m�[38;5;43m20221209021446565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209021446565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209021446570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209021446571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209021446571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209021446572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209021446572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:14:48.256518 run   osmo-stp_10.42.42.5(pid=10718): stdout: 
| (launched: 2022-12-09_02:14:46.201795)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:14:48.391221 run   osmo-stp_10.42.42.5(pid=10718): stderr: 
| �[0;m�[38;5;43m20221209021446565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209021446565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209021446570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209021446571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209021446571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209021446572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209021446572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:14:48.548032 run              patchelf(pid=10721): Terminating (SIGINT)
02:14:48.731301 run              patchelf(pid=10721): Terminated: ok {rc=0}
02:14:48.764252 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10718): Process ended prematurely: osmo-stp_10.42.42.5(pid=10718) [trial-2353↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10718)]  [trial-2353↪gprs:sysmo↪ping_idle_ping.py:27]
02:14:48.773343 tst             ping_idle_ping.py:27: Test FAILED (7.0 sec)
02:14:48.837093 run   osmo-hlr_10.42.42.2(pid=10715): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10715)]
02:14:48.889022 run   osmo-hlr_10.42.42.2(pid=10715): stdout: 
| (launched: 2022-12-09_02:14:45.155334) 
02:14:48.941991 run   osmo-hlr_10.42.42.2(pid=10715): stderr: 
| �[0;m�[1;31m20221209021445358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209021445358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209021445358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209021445358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209021445358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209021445358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209021445371 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209021445381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209021445382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209021445382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:14:48.987083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10714): Terminating (SIGTERM)
02:14:49.029483 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10717): Terminating (SIGTERM)
02:14:49.072182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10720): Terminating (SIGTERM)
02:14:49.082207 ---      ParallelTerminationStrategy: PID 10714 died...
02:14:49.138851 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10714): Terminated: ok {rc=0}
02:14:49.148851 ---      ParallelTerminationStrategy: PID 10717 died...
02:14:49.205384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10717): Terminated: ok {rc=0}
02:14:49.215458 ---      ParallelTerminationStrategy: PID 10720 died...
02:14:49.271709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10720): Terminated: ok {rc=0}
02:14:49.359462 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10718): Process ended prematurely: osmo-stp_10.42.42.5(pid=10718) [trial-2353↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10718)]