Failed
gprs:trx-b200+mod-bts0-egprs.iperf3.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12202): Process ended prematurely: osmo-stp_10.42.42.5(pid=12202) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12202)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200+mod-bts0-egprs iperf3.py ---------------------------------------------- 02:31:36.767186 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:36.778833 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:31:36.921855 tst iperf3.py: using LAC 18451 02:31:37.042919 tst iperf3.py: using RAC 91 02:31:37.166576 tst iperf3.py: using CellId 18451 02:31:37.290550 tst iperf3.py: using BVCI 18452 02:31:37.314222 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.325222 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.335781 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.346444 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.357201 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.367951 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.378790 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.389433 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:37.400232 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:31:37.681663 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:31:37.810441 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:38.130033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12194): Launched 02:31:38.395678 run iperf3-srv_10.42.42.10(pid=12195): Launched 02:31:38.583496 tst iperf3.py:8: start network... 02:31:38.712228 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:39.206758 run create_hlr_db(pid=12196): Launched 02:31:39.384271 bus /gobi_6: Setting Powered False 02:31:40.405353 run create_hlr_db(pid=12196): Terminated: ok {rc=0} 02:31:40.843627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12198): Launched 02:31:41.174383 run osmo-hlr_10.42.42.2(pid=12199): Launched 02:31:41.297749 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:41.874253 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12201): Launched 02:31:42.205956 run osmo-stp_10.42.42.5(pid=12202): Launched 02:31:42.327311 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:31:42.904160 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12204): Launched 02:31:43.023042 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:31:43.310802 run patchelf(pid=12205): Launched 02:31:43.503532 run osmo-stp_10.42.42.5(pid=12202): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12202)] 02:31:43.644019 run osmo-stp_10.42.42.5(pid=12202): stdout: | (launched: 2022-12-09_02:31:42.042722) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:43.785165 run osmo-stp_10.42.42.5(pid=12202): stderr: | �[0;m�[38;5;43m20221209023142237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023142237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023142237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023142238 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023142238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023142238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023142238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:43.921271 run osmo-stp_10.42.42.5(pid=12202): stdout: | (launched: 2022-12-09_02:31:42.042722) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:44.056087 run osmo-stp_10.42.42.5(pid=12202): stderr: | �[0;m�[38;5;43m20221209023142237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023142237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023142237 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023142238 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023142238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023142238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023142238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:44.213312 run patchelf(pid=12205): Terminating (SIGINT) 02:31:44.397386 run patchelf(pid=12205): Terminated: ok {rc=0} 02:31:44.431337 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=12202): Process ended prematurely: osmo-stp_10.42.42.5(pid=12202) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12202)] [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8] 02:31:44.441745 tst iperf3.py:8: Test FAILED (7.7 sec) 02:31:44.505133 run osmo-hlr_10.42.42.2(pid=12199): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12199)] 02:31:44.556260 run osmo-hlr_10.42.42.2(pid=12199): stdout: | (launched: 2022-12-09_02:31:41.011899) 02:31:44.608322 run osmo-hlr_10.42.42.2(pid=12199): stderr: | �[0;m�[1;31m20221209023141215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023141215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023141215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023141215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023141215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023141215 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023141229 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023141237 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023141237 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023141237 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:31:44.652255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12194): Terminating (SIGTERM) 02:31:44.694291 run iperf3-srv_10.42.42.10(pid=12195): Terminating (SIGTERM) 02:31:44.735989 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12198): Terminating (SIGTERM) 02:31:44.777968 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12201): Terminating (SIGTERM) 02:31:44.819752 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12204): Terminating (SIGTERM) 02:31:44.829697 --- ParallelTerminationStrategy: PID 12194 died... 02:31:44.885407 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12194): Terminated: ok {rc=0} 02:31:44.895439 --- ParallelTerminationStrategy: PID 12195 died... 02:31:44.950669 run iperf3-srv_10.42.42.10(pid=12195): Terminated {rc=256} 02:31:44.960627 --- ParallelTerminationStrategy: PID 12198 died... 02:31:45.016019 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12198): Terminated: ok {rc=0} 02:31:45.026369 --- ParallelTerminationStrategy: PID 12201 died... 02:31:45.082186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12201): Terminated: ok {rc=0} 02:31:45.092301 --- ParallelTerminationStrategy: PID 12204 died... 02:31:45.148337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12204): Terminated: ok {rc=0} 02:31:45.235971 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12202): Process ended prematurely: osmo-stp_10.42.42.5(pid=12202) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12202)]