Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=12172): Process ended prematurely: osmo-stp_10.42.42.5(pid=12172) [trial-2353↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12172)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 02:31:14.251702 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.263561 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 02:31:14.415514 tst ping_idle_ping.py: using LAC 18449 02:31:14.541125 tst ping_idle_ping.py: using RAC 89 02:31:14.667041 tst ping_idle_ping.py: using CellId 18449 02:31:14.795033 tst ping_idle_ping.py: using BVCI 18450 02:31:14.819995 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.831172 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.842342 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.853653 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.865139 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.876033 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.887338 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:31:14.898775 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 02:31:15.194048 tst ping_idle_ping.py:24: start network... 02:31:15.330158 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:15.864543 run create_hlr_db(pid=12166): Launched 02:31:16.057609 bus /gobi_6: Setting Powered False 02:31:17.078947 run create_hlr_db(pid=12166): Terminated: ok {rc=0} 02:31:17.517070 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12168): Launched 02:31:17.842392 run osmo-hlr_10.42.42.2(pid=12169): Launched 02:31:17.964759 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:18.529974 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12171): Launched 02:31:18.855671 run osmo-stp_10.42.42.5(pid=12172): Launched 02:31:18.974743 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:31:19.539749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12174): Launched 02:31:19.648059 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:31:19.914391 run patchelf(pid=12175): Launched 02:31:20.091433 run osmo-stp_10.42.42.5(pid=12172): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12172)] 02:31:20.221241 run osmo-stp_10.42.42.5(pid=12172): stdout: | (launched: 2022-12-09_02:31:18.694687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:20.351214 run osmo-stp_10.42.42.5(pid=12172): stderr: | �[0;m�[38;5;43m20221209023118888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023118888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023118889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023118889 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023118890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023118890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023118890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:20.476769 run osmo-stp_10.42.42.5(pid=12172): stdout: | (launched: 2022-12-09_02:31:18.694687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:20.601450 run osmo-stp_10.42.42.5(pid=12172): stderr: | �[0;m�[38;5;43m20221209023118888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023118888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023118889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023118889 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023118890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023118890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023118890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:20.746169 run patchelf(pid=12175): Terminating (SIGINT) 02:31:20.916135 run patchelf(pid=12175): Terminated: ok {rc=0} 02:31:20.946970 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=12172): Process ended prematurely: osmo-stp_10.42.42.5(pid=12172) [trial-2353↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12172)] [trial-2353↪gprs:trx-b200↪ping_idle_ping.py:27] 02:31:20.955605 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 02:31:21.015019 run osmo-hlr_10.42.42.2(pid=12169): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12169)] 02:31:21.063533 run osmo-hlr_10.42.42.2(pid=12169): stdout: | (launched: 2022-12-09_02:31:17.682330) 02:31:21.112651 run osmo-hlr_10.42.42.2(pid=12169): stderr: | �[0;m�[1;31m20221209023117882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023117882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023117882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023117882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023117882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023117882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023117894 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023117902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023117902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023117902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:31:21.155562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12168): Terminating (SIGTERM) 02:31:21.195776 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12171): Terminating (SIGTERM) 02:31:21.235842 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12174): Terminating (SIGTERM) 02:31:21.245368 --- ParallelTerminationStrategy: PID 12168 died... 02:31:21.299165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12168): Terminated: ok {rc=0} 02:31:21.309047 --- ParallelTerminationStrategy: PID 12171 died... 02:31:21.362195 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12171): Terminated: ok {rc=0} 02:31:21.371980 --- ParallelTerminationStrategy: PID 12174 died... 02:31:21.425890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12174): Terminated: ok {rc=0} 02:31:21.515071 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12172): Process ended prematurely: osmo-stp_10.42.42.5(pid=12172) [trial-2353↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12172)]