Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15760): Process ended prematurely: osmo-stp_10.42.42.5(pid=15760) [trial-2353↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15760)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 02:59:35.159367 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.171226 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:59:35.338988 tst iperf3.py: using LAC 18599 02:59:35.467622 tst iperf3.py: using RAC 239 02:59:35.596128 tst iperf3.py: using CellId 18599 02:59:35.719571 tst iperf3.py: using BVCI 18600 02:59:35.742822 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.753825 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.764771 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.775931 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.786860 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.797802 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.808721 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.819621 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:59:35.830599 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:59:36.123480 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:59:36.258830 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:59:36.590800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15752): Launched 02:59:36.866714 run iperf3-srv_10.42.42.10(pid=15753): Launched 02:59:37.063244 tst iperf3.py:8: start network... 02:59:37.197803 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:59:37.712319 run create_hlr_db(pid=15754): Launched 02:59:37.896789 bus /gobi_6: Setting Powered False 02:59:38.919209 run create_hlr_db(pid=15754): Terminated: ok {rc=0} 02:59:39.322053 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15756): Launched 02:59:39.623431 run osmo-hlr_10.42.42.2(pid=15757): Launched 02:59:39.739016 run osmo-stp_10.42.42.5: Starting osmo-stp 02:59:40.272569 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15759): Launched 02:59:40.573725 run osmo-stp_10.42.42.5(pid=15760): Launched 02:59:40.684385 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:59:41.206063 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15762): Launched 02:59:41.313521 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:59:41.574854 run patchelf(pid=15763): Launched 02:59:41.749545 run osmo-stp_10.42.42.5(pid=15760): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15760)] 02:59:41.877126 run osmo-stp_10.42.42.5(pid=15760): stdout: | (launched: 2022-12-09_02:59:40.425095) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:59:42.005455 run osmo-stp_10.42.42.5(pid=15760): stderr: | �[0;m�[38;5;43m20221209025940596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025940596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025940596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025940597 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025940597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025940597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025940597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:59:42.129465 run osmo-stp_10.42.42.5(pid=15760): stdout: | (launched: 2022-12-09_02:59:40.425095) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:59:42.252066 run osmo-stp_10.42.42.5(pid=15760): stderr: | �[0;m�[38;5;43m20221209025940596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025940596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025940596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025940597 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025940597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025940597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025940597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:59:42.394626 run patchelf(pid=15763): Terminating (SIGINT) 02:59:42.562011 run patchelf(pid=15763): Terminated: ok {rc=0} 02:59:42.592785 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15760): Process ended prematurely: osmo-stp_10.42.42.5(pid=15760) [trial-2353↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15760)] [trial-2353↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 02:59:42.601960 tst iperf3.py:8: Test FAILED (7.5 sec) 02:59:42.663018 run osmo-hlr_10.42.42.2(pid=15757): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15757)] 02:59:42.712101 run osmo-hlr_10.42.42.2(pid=15757): stdout: | (launched: 2022-12-09_02:59:39.474273) 02:59:42.761818 run osmo-hlr_10.42.42.2(pid=15757): stderr: | �[0;m�[1;31m20221209025939653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209025939653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209025939653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209025939653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209025939653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209025939653 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209025939668 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209025939677 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209025939677 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209025939677 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:59:42.803948 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15752): Terminating (SIGTERM) 02:59:42.844047 run iperf3-srv_10.42.42.10(pid=15753): Terminating (SIGTERM) 02:59:42.884146 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15756): Terminating (SIGTERM) 02:59:42.924122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15759): Terminating (SIGTERM) 02:59:42.964231 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15762): Terminating (SIGTERM) 02:59:42.973913 --- ParallelTerminationStrategy: PID 15752 died... 02:59:43.027441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15752): Terminated: ok {rc=0} 02:59:43.037381 --- ParallelTerminationStrategy: PID 15753 died... 02:59:43.090412 run iperf3-srv_10.42.42.10(pid=15753): Terminated {rc=256} 02:59:43.100162 --- ParallelTerminationStrategy: PID 15756 died... 02:59:43.153185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15756): Terminated: ok {rc=0} 02:59:43.162870 --- ParallelTerminationStrategy: PID 15759 died... 02:59:43.215948 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15759): Terminated: ok {rc=0} 02:59:43.225681 --- ParallelTerminationStrategy: PID 15762 died... 02:59:43.278386 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15762): Terminated: ok {rc=0} 02:59:43.366802 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15760): Process ended prematurely: osmo-stp_10.42.42.5(pid=15760) [trial-2353↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15760)]