Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16215): Process ended prematurely: osmo-stp_10.42.42.5(pid=16215) [trial-2353↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16215)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py ---------------------------------------------- 03:05:24.961106 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:24.973271 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:05:25.114700 tst iperf3.py: using LAC 18631 03:05:25.240043 tst iperf3.py: using RAC 16 03:05:25.366406 tst iperf3.py: using CellId 18631 03:05:25.486910 tst iperf3.py: using BVCI 18632 03:05:25.509836 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.521220 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.532248 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.543428 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.554604 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.565832 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.576927 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.587993 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:05:25.599355 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:05:25.885065 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 03:05:26.017915 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:05:26.344794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16207): Launched 03:05:26.616527 run iperf3-srv_10.42.42.10(pid=16208): Launched 03:05:26.809767 tst iperf3.py:8: start network... 03:05:26.942022 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:05:27.449133 run create_hlr_db(pid=16209): Launched 03:05:27.631890 bus /gobi_6: Setting Powered False 03:05:28.654194 run create_hlr_db(pid=16209): Terminated: ok {rc=0} 03:05:29.074303 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16211): Launched 03:05:29.390810 run osmo-hlr_10.42.42.2(pid=16212): Launched 03:05:29.507520 run osmo-stp_10.42.42.5: Starting osmo-stp 03:05:30.054750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16214): Launched 03:05:30.370852 run osmo-stp_10.42.42.5(pid=16215): Launched 03:05:30.486080 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:05:31.051298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16217): Launched 03:05:31.166525 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:05:31.462764 run patchelf(pid=16218): Launched 03:05:31.683588 run osmo-stp_10.42.42.5(pid=16215): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16215)] 03:05:31.822353 run osmo-stp_10.42.42.5(pid=16215): stdout: | (launched: 2022-12-09_03:05:30.215629) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:05:31.959567 run osmo-stp_10.42.42.5(pid=16215): stderr: | �[0;m�[38;5;43m20221209030530407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209030530407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209030530407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209030530408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209030530408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209030530408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209030530408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:05:32.092560 run osmo-stp_10.42.42.5(pid=16215): stdout: | (launched: 2022-12-09_03:05:30.215629) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:05:32.223795 run osmo-stp_10.42.42.5(pid=16215): stderr: | �[0;m�[38;5;43m20221209030530407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209030530407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209030530407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209030530408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209030530408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209030530408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209030530408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:05:32.374944 run patchelf(pid=16218): Terminating (SIGINT) 03:05:32.552064 run patchelf(pid=16218): Terminated: ok {rc=0} 03:05:32.584727 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16215): Process ended prematurely: osmo-stp_10.42.42.5(pid=16215) [trial-2353↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16215)] [trial-2353↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8] 03:05:32.594578 tst iperf3.py:8: Test FAILED (7.7 sec) 03:05:32.656634 run osmo-hlr_10.42.42.2(pid=16212): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16212)] 03:05:32.707826 run osmo-hlr_10.42.42.2(pid=16212): stdout: | (launched: 2022-12-09_03:05:29.235290) 03:05:32.759171 run osmo-hlr_10.42.42.2(pid=16212): stderr: | �[0;m�[1;31m20221209030529433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209030529433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209030529433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209030529433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209030529433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209030529433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209030529445 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209030529453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209030529454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209030529454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:05:32.802995 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16207): Terminating (SIGTERM) 03:05:32.844353 run iperf3-srv_10.42.42.10(pid=16208): Terminating (SIGTERM) 03:05:32.885821 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16211): Terminating (SIGTERM) 03:05:32.927244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16214): Terminating (SIGTERM) 03:05:32.968592 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16217): Terminating (SIGTERM) 03:05:32.978195 --- ParallelTerminationStrategy: PID 16207 died... 03:05:33.033529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16207): Terminated: ok {rc=0} 03:05:33.043490 --- ParallelTerminationStrategy: PID 16208 died... 03:05:33.098897 run iperf3-srv_10.42.42.10(pid=16208): Terminated {rc=256} 03:05:33.108794 --- ParallelTerminationStrategy: PID 16211 died... 03:05:33.163792 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16211): Terminated: ok {rc=0} 03:05:33.173730 --- ParallelTerminationStrategy: PID 16214 died... 03:05:33.228678 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16214): Terminated: ok {rc=0} 03:05:33.238714 --- ParallelTerminationStrategy: PID 16217 died... 03:05:33.293811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16217): Terminated: ok {rc=0} 03:05:33.380355 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16215): Process ended prematurely: osmo-stp_10.42.42.5(pid=16215) [trial-2353↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16215)]