Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14875): Process ended prematurely: osmo-stp_10.42.42.5(pid=14875) [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14875)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 02:50:42.566664 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:42.578255 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:50:42.732759 tst iperf3.py: using LAC 18552 02:50:42.854153 tst iperf3.py: using RAC 192 02:50:42.970166 tst iperf3.py: using CellId 18552 02:50:43.094733 tst iperf3.py: using BVCI 18553 02:50:43.119603 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.131165 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.142386 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.154528 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.166093 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.178162 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.190129 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.202029 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:43.213969 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:50:43.490072 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:50:43.614327 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:50:43.921574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14867): Launched 02:50:44.177143 run iperf3-srv_10.42.42.10(pid=14868): Launched 02:50:44.358207 tst iperf3.py:8: start network... 02:50:44.483342 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:50:44.949642 run create_hlr_db(pid=14869): Launched 02:50:45.120535 bus /gobi_6: Setting Powered False 02:50:46.159283 run create_hlr_db(pid=14869): Terminated: ok {rc=0} 02:50:46.607951 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14871): Launched 02:50:47.027739 run osmo-hlr_10.42.42.2(pid=14872): Launched 02:50:47.180628 run osmo-stp_10.42.42.5: Starting osmo-stp 02:50:47.696941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14874): Launched 02:50:47.993283 run osmo-stp_10.42.42.5(pid=14875): Launched 02:50:48.102872 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:50:48.620743 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14877): Launched 02:50:48.727310 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:50:48.985603 run patchelf(pid=14878): Launched 02:50:49.159565 run osmo-stp_10.42.42.5(pid=14875): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14875)] 02:50:49.286633 run osmo-stp_10.42.42.5(pid=14875): stdout: | (launched: 2022-12-09_02:50:47.847312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:49.414369 run osmo-stp_10.42.42.5(pid=14875): stderr: | �[0;m�[38;5;43m20221209025048015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025048015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025048016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025048016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025048018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025048019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025048019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:49.537659 run osmo-stp_10.42.42.5(pid=14875): stdout: | (launched: 2022-12-09_02:50:47.847312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:49.660314 run osmo-stp_10.42.42.5(pid=14875): stderr: | �[0;m�[38;5;43m20221209025048015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025048015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025048016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025048016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025048018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025048019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025048019 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:49.803027 run patchelf(pid=14878): Terminating (SIGINT) 02:50:49.970424 run patchelf(pid=14878): Terminated: ok {rc=0} 02:50:50.001172 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14875): Process ended prematurely: osmo-stp_10.42.42.5(pid=14875) [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14875)] [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 02:50:50.010424 tst iperf3.py:8: Test FAILED (7.5 sec) 02:50:50.071546 run osmo-hlr_10.42.42.2(pid=14872): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14872)] 02:50:50.121295 run osmo-hlr_10.42.42.2(pid=14872): stdout: | (launched: 2022-12-09_02:50:46.775316) 02:50:50.171494 run osmo-hlr_10.42.42.2(pid=14872): stderr: | �[0;m�[1;31m20221209025047090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209025047090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209025047090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209025047090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209025047090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209025047090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209025047107 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209025047118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209025047119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209025047119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:50:50.213913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14867): Terminating (SIGTERM) 02:50:50.253827 run iperf3-srv_10.42.42.10(pid=14868): Terminating (SIGTERM) 02:50:50.293472 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14871): Terminating (SIGTERM) 02:50:50.333432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14874): Terminating (SIGTERM) 02:50:50.373629 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14877): Terminating (SIGTERM) 02:50:50.383416 --- ParallelTerminationStrategy: PID 14867 died... 02:50:50.437617 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14867): Terminated: ok {rc=0} 02:50:50.447278 --- ParallelTerminationStrategy: PID 14868 died... 02:50:50.500287 run iperf3-srv_10.42.42.10(pid=14868): Terminated {rc=256} 02:50:50.510297 --- ParallelTerminationStrategy: PID 14871 died... 02:50:50.563484 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14871): Terminated: ok {rc=0} 02:50:50.573504 --- ParallelTerminationStrategy: PID 14874 died... 02:50:50.626242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14874): Terminated: ok {rc=0} 02:50:50.636375 --- ParallelTerminationStrategy: PID 14877 died... 02:50:50.689758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14877): Terminated: ok {rc=0} 02:50:50.776606 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14875): Process ended prematurely: osmo-stp_10.42.42.5(pid=14875) [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14875)]