Failed
gprs:oc2g+mod-bts0-egprs.ping.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11633): Process ended prematurely: osmo-stp_10.42.42.5(pid=11633) [trial-2353↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11633)]
Standard Output
---------------------------------------------- trial-2353 gprs:oc2g+mod-bts0-egprs ping.py ---------------------------------------------- 02:23:28.932911 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:28.944906 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:23:29.077581 tst ping.py: using LAC 18407 02:23:29.208739 tst ping.py: using RAC 47 02:23:29.339036 tst ping.py: using CellId 18407 02:23:29.463076 tst ping.py: using BVCI 18408 02:23:29.487667 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.499298 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.510498 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.521874 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.533193 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.544411 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.555940 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:23:29.567310 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:23:29.842605 tst ping.py:19: start network... 02:23:29.967724 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:23:30.447644 run create_hlr_db(pid=11627): Launched 02:23:30.620391 bus /gobi_6: Setting Powered False 02:23:31.692302 run create_hlr_db(pid=11627): Terminated: ok {rc=0} 02:23:32.166436 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11629): Launched 02:23:32.491371 run osmo-hlr_10.42.42.2(pid=11630): Launched 02:23:32.611954 run osmo-stp_10.42.42.5: Starting osmo-stp 02:23:33.172142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11632): Launched 02:23:33.493698 run osmo-stp_10.42.42.5(pid=11633): Launched 02:23:33.611758 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:23:34.171530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11635): Launched 02:23:34.286358 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:23:34.567486 run patchelf(pid=11636): Launched 02:23:34.755447 run osmo-stp_10.42.42.5(pid=11633): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11633)] 02:23:34.893776 run osmo-stp_10.42.42.5(pid=11633): stdout: | (launched: 2022-12-09_02:23:33.335565) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:35.031749 run osmo-stp_10.42.42.5(pid=11633): stderr: | �[0;m�[38;5;43m20221209022333527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209022333528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209022333528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209022333528 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209022333530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209022333531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209022333531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:35.165295 run osmo-stp_10.42.42.5(pid=11633): stdout: | (launched: 2022-12-09_02:23:33.335565) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:35.298589 run osmo-stp_10.42.42.5(pid=11633): stderr: | �[0;m�[38;5;43m20221209022333527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209022333528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209022333528 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209022333528 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209022333530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209022333531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209022333531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:35.452405 run patchelf(pid=11636): Terminating (SIGINT) 02:23:35.632679 run patchelf(pid=11636): Terminated: ok {rc=0} 02:23:35.665468 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11633): Process ended prematurely: osmo-stp_10.42.42.5(pid=11633) [trial-2353↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11633)] [trial-2353↪gprs:oc2g+mod-bts0-egprs↪ping.py:22] 02:23:35.674694 tst ping.py:22: Test FAILED (6.7 sec) 02:23:35.738475 run osmo-hlr_10.42.42.2(pid=11630): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:oc2g+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11630)] 02:23:35.790534 run osmo-hlr_10.42.42.2(pid=11630): stdout: | (launched: 2022-12-09_02:23:32.331215) 02:23:35.843104 run osmo-hlr_10.42.42.2(pid=11630): stderr: | �[0;m�[1;31m20221209022332529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209022332529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209022332529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209022332529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209022332529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209022332529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209022332542 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:oc2g+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209022332550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209022332550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209022332550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:23:35.887677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11629): Terminating (SIGTERM) 02:23:35.930144 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11632): Terminating (SIGTERM) 02:23:35.972587 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11635): Terminating (SIGTERM) 02:23:35.982409 --- ParallelTerminationStrategy: PID 11629 died... 02:23:36.039355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11629): Terminated: ok {rc=0} 02:23:36.049944 --- ParallelTerminationStrategy: PID 11632 died... 02:23:36.106709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11632): Terminated: ok {rc=0} 02:23:36.116779 --- ParallelTerminationStrategy: PID 11635 died... 02:23:36.173527 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11635): Terminated: ok {rc=0} 02:23:36.261362 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11633): Process ended prematurely: osmo-stp_10.42.42.5(pid=11633) [trial-2353↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11633)]