Failed
gprs:sysmo+mod-bts0-dynts-ipa.iperf3.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10817): Process ended prematurely: osmo-stp_10.42.42.5(pid=10817) [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10817)]
Standard Output
---------------------------------------------- trial-2353 gprs:sysmo+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 02:16:05.792862 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:05.804937 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:16:05.964927 tst iperf3.py: using LAC 18368 02:16:06.097106 tst iperf3.py: using RAC 8 02:16:06.229531 tst iperf3.py: using CellId 18368 02:16:06.362554 tst iperf3.py: using BVCI 18369 02:16:06.388153 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.399678 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.411236 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.422917 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.434349 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.445847 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.457486 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.468801 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:06.480361 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:16:06.767950 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:16:06.898804 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:07.225092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10809): Launched 02:16:07.496212 run iperf3-srv_10.42.42.10(pid=10810): Launched 02:16:07.687022 tst iperf3.py:8: start network... 02:16:07.817431 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:16:08.318626 run create_hlr_db(pid=10811): Launched 02:16:08.497166 bus /gobi_6: Setting Powered False 02:16:09.518679 run create_hlr_db(pid=10811): Terminated: ok {rc=0} 02:16:09.964417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10813): Launched 02:16:10.302082 run osmo-hlr_10.42.42.2(pid=10814): Launched 02:16:10.426428 run osmo-stp_10.42.42.5: Starting osmo-stp 02:16:11.010384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10816): Launched 02:16:11.346959 run osmo-stp_10.42.42.5(pid=10817): Launched 02:16:11.469373 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:16:12.053014 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10819): Launched 02:16:12.172841 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:16:12.465536 run patchelf(pid=10820): Launched 02:16:12.659696 run osmo-stp_10.42.42.5(pid=10817): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10817)] 02:16:12.802139 run osmo-stp_10.42.42.5(pid=10817): stdout: | (launched: 2022-12-09_02:16:11.180549) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:12.944858 run osmo-stp_10.42.42.5(pid=10817): stderr: | �[0;m�[38;5;43m20221209021611378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021611378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021611378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021611379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021611379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021611379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021611379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:13.083655 run osmo-stp_10.42.42.5(pid=10817): stdout: | (launched: 2022-12-09_02:16:11.180549) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:13.220572 run osmo-stp_10.42.42.5(pid=10817): stderr: | �[0;m�[38;5;43m20221209021611378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209021611378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209021611378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209021611379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209021611379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209021611379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209021611379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:13.379931 run patchelf(pid=10820): Terminating (SIGINT) 02:16:13.566404 run patchelf(pid=10820): Terminated: ok {rc=0} 02:16:13.600479 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10817): Process ended prematurely: osmo-stp_10.42.42.5(pid=10817) [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10817)] [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8] 02:16:13.610444 tst iperf3.py:8: Test FAILED (7.9 sec) 02:16:13.674728 run osmo-hlr_10.42.42.2(pid=10814): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10814)] 02:16:13.726694 run osmo-hlr_10.42.42.2(pid=10814): stdout: | (launched: 2022-12-09_02:16:10.135561) 02:16:13.779600 run osmo-hlr_10.42.42.2(pid=10814): stderr: | �[0;m�[1;31m20221209021610338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209021610338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209021610338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209021610338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209021610338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209021610338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209021610349 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209021610358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209021610358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209021610358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:16:13.824431 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10809): Terminating (SIGTERM) 02:16:13.866599 run iperf3-srv_10.42.42.10(pid=10810): Terminating (SIGTERM) 02:16:13.909433 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10813): Terminating (SIGTERM) 02:16:13.951720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10816): Terminating (SIGTERM) 02:16:13.994611 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10819): Terminating (SIGTERM) 02:16:14.004641 --- ParallelTerminationStrategy: PID 10809 died... 02:16:14.061958 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10809): Terminated: ok {rc=0} 02:16:14.072180 --- ParallelTerminationStrategy: PID 10810 died... 02:16:14.128836 run iperf3-srv_10.42.42.10(pid=10810): Terminated {rc=256} 02:16:14.138876 --- ParallelTerminationStrategy: PID 10813 died... 02:16:14.195185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10813): Terminated: ok {rc=0} 02:16:14.205391 --- ParallelTerminationStrategy: PID 10816 died... 02:16:14.261954 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10816): Terminated: ok {rc=0} 02:16:14.272402 --- ParallelTerminationStrategy: PID 10819 died... 02:16:14.329432 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10819): Terminated: ok {rc=0} 02:16:14.417883 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10817): Process ended prematurely: osmo-stp_10.42.42.5(pid=10817) [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10817)]