Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 23 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10846): Process ended prematurely: osmo-stp_10.42.42.5(pid=10846) [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10846)]

Standard Output

----------------------------------------------
trial-2353 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
02:16:35.779470 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:35.792327 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
02:16:35.948202 tst                          ping.py: using LAC 18370
02:16:36.079045 tst                          ping.py: using RAC 10
02:16:36.209222 tst                          ping.py: using CellId 18370
02:16:36.340567 tst                          ping.py: using BVCI 18371
02:16:36.366157 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.377806 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.389205 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.400893 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.412753 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.424494 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.436390 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
02:16:36.448006 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
02:16:36.729990 tst                       ping.py:19: start network...
02:16:36.857657 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:16:37.353442 run         create_hlr_db(pid=10840): Launched
02:16:37.530501 bus                          /gobi_6: Setting Powered False
02:16:38.550929 run         create_hlr_db(pid=10840): Terminated: ok {rc=0}
02:16:38.990158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10842): Launched
02:16:39.323916 run   osmo-hlr_10.42.42.2(pid=10843): Launched
02:16:39.444633 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:16:40.026746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10845): Launched
02:16:40.357995 run   osmo-stp_10.42.42.5(pid=10846): Launched
02:16:40.478031 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:16:41.052140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10848): Launched
02:16:41.169885 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:16:41.457615 run              patchelf(pid=10849): Launched
02:16:41.649335 run   osmo-stp_10.42.42.5(pid=10846): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10846)]
02:16:41.789336 run   osmo-stp_10.42.42.5(pid=10846): stdout: 
| (launched: 2022-12-09_02:16:40.194782)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:16:41.930017 run   osmo-stp_10.42.42.5(pid=10846): stderr: 
| �[0;m�[38;5;43m20221209021640389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209021640389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209021640389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209021640390 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209021640392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209021640392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209021640392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:16:42.066153 run   osmo-stp_10.42.42.5(pid=10846): stdout: 
| (launched: 2022-12-09_02:16:40.194782)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:16:42.201301 run   osmo-stp_10.42.42.5(pid=10846): stderr: 
| �[0;m�[38;5;43m20221209021640389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209021640389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209021640389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209021640390 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209021640392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209021640392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209021640392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:16:42.357861 run              patchelf(pid=10849): Terminating (SIGINT)
02:16:42.540795 run              patchelf(pid=10849): Terminated: ok {rc=0}
02:16:42.573858 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10846): Process ended prematurely: osmo-stp_10.42.42.5(pid=10846) [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10846)]  [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
02:16:42.583033 tst                       ping.py:22: Test FAILED (6.8 sec)
02:16:42.647544 run   osmo-hlr_10.42.42.2(pid=10843): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10843)]
02:16:42.699746 run   osmo-hlr_10.42.42.2(pid=10843): stdout: 
| (launched: 2022-12-09_02:16:39.158245) 
02:16:42.752426 run   osmo-hlr_10.42.42.2(pid=10843): stderr: 
| �[0;m�[1;31m20221209021639358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209021639358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209021639358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209021639359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209021639359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209021639359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209021639376 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209021639385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209021639386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209021639386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:16:42.797757 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10842): Terminating (SIGTERM)
02:16:42.839829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10845): Terminating (SIGTERM)
02:16:42.882760 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10848): Terminating (SIGTERM)
02:16:42.893154 ---      ParallelTerminationStrategy: PID 10842 died...
02:16:42.950085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10842): Terminated: ok {rc=0}
02:16:42.960330 ---      ParallelTerminationStrategy: PID 10845 died...
02:16:43.017249 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10845): Terminated: ok {rc=0}
02:16:43.027545 ---      ParallelTerminationStrategy: PID 10848 died...
02:16:43.083837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10848): Terminated: ok {rc=0}
02:16:43.172041 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10846): Process ended prematurely: osmo-stp_10.42.42.5(pid=10846) [trial-2353↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10846)]