Failed
gprs:trx-b200+mod-bts0-egprs.ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12232): Process ended prematurely: osmo-stp_10.42.42.5(pid=12232) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12232)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200+mod-bts0-egprs ping.py ---------------------------------------------- 02:32:06.310764 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.322691 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:32:06.468485 tst ping.py: using LAC 18453 02:32:06.594003 tst ping.py: using RAC 93 02:32:06.720629 tst ping.py: using CellId 18453 02:32:06.850942 tst ping.py: using BVCI 18454 02:32:06.875387 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.886841 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.898056 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.909515 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.920713 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.931897 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.943449 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:32:06.954819 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:32:07.241463 tst ping.py:19: start network... 02:32:07.373738 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:32:07.872213 run create_hlr_db(pid=12226): Launched 02:32:08.056285 bus /gobi_6: Setting Powered False 02:32:09.075937 run create_hlr_db(pid=12226): Terminated: ok {rc=0} 02:32:09.472042 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12228): Launched 02:32:09.768433 run osmo-hlr_10.42.42.2(pid=12229): Launched 02:32:09.885240 run osmo-stp_10.42.42.5: Starting osmo-stp 02:32:10.408511 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12231): Launched 02:32:10.704419 run osmo-stp_10.42.42.5(pid=12232): Launched 02:32:10.812334 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:32:11.327113 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12234): Launched 02:32:11.432354 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:32:11.691917 run patchelf(pid=12235): Launched 02:32:11.864496 run osmo-stp_10.42.42.5(pid=12232): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12232)] 02:32:11.991348 run osmo-stp_10.42.42.5(pid=12232): stdout: | (launched: 2022-12-09_02:32:10.558273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:12.118067 run osmo-stp_10.42.42.5(pid=12232): stderr: | �[0;m�[38;5;43m20221209023210728 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023210728 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023210728 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023210729 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023210729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023210729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023210729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:12.240155 run osmo-stp_10.42.42.5(pid=12232): stdout: | (launched: 2022-12-09_02:32:10.558273) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:12.362011 run osmo-stp_10.42.42.5(pid=12232): stderr: | �[0;m�[38;5;43m20221209023210728 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023210728 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023210728 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023210729 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023210729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023210729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023210729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:12.502886 run patchelf(pid=12235): Terminating (SIGINT) 02:32:12.668826 run patchelf(pid=12235): Terminated: ok {rc=0} 02:32:12.699103 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12232): Process ended prematurely: osmo-stp_10.42.42.5(pid=12232) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12232)] [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22] 02:32:12.707599 tst ping.py:22: Test FAILED (6.4 sec) 02:32:12.766781 run osmo-hlr_10.42.42.2(pid=12229): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12229)] 02:32:12.815031 run osmo-hlr_10.42.42.2(pid=12229): stdout: | (launched: 2022-12-09_02:32:09.623055) 02:32:12.864539 run osmo-hlr_10.42.42.2(pid=12229): stderr: | �[0;m�[1;31m20221209023209798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023209798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023209798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023209798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023209798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023209798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023209810 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023209818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023209819 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023209819 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:32:12.906562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12228): Terminating (SIGTERM) 02:32:12.946245 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12231): Terminating (SIGTERM) 02:32:12.985926 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12234): Terminating (SIGTERM) 02:32:12.995245 --- ParallelTerminationStrategy: PID 12228 died... 02:32:13.048422 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12228): Terminated: ok {rc=0} 02:32:13.058034 --- ParallelTerminationStrategy: PID 12231 died... 02:32:13.110948 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12231): Terminated: ok {rc=0} 02:32:13.120451 --- ParallelTerminationStrategy: PID 12234 died... 02:32:13.173207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12234): Terminated: ok {rc=0} 02:32:13.261581 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12232): Process ended prematurely: osmo-stp_10.42.42.5(pid=12232) [trial-2353↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12232)]