Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=15623): Process ended prematurely: osmo-stp_10.42.42.5(pid=15623) [trial-2353↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15623)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 02:57:34.897191 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:34.908660 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:57:35.045776 tst iperf3.py: using LAC 18589 02:57:35.163690 tst iperf3.py: using RAC 229 02:57:35.283418 tst iperf3.py: using CellId 18589 02:57:35.402890 tst iperf3.py: using BVCI 18590 02:57:35.425849 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.436621 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.447312 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.458321 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.469173 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.480140 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.491225 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.502191 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:35.513437 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:57:35.812341 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:57:35.947007 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:57:36.278417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15615): Launched 02:57:36.553893 run iperf3-srv_10.42.42.10(pid=15616): Launched 02:57:36.750470 tst iperf3.py:8: start network... 02:57:36.884937 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:57:37.397432 run create_hlr_db(pid=15617): Launched 02:57:37.590302 bus /gobi_6: Setting Powered False 02:57:38.603778 run create_hlr_db(pid=15617): Terminated: ok {rc=0} 02:57:39.029995 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15619): Launched 02:57:39.350287 run osmo-hlr_10.42.42.2(pid=15620): Launched 02:57:39.469868 run osmo-stp_10.42.42.5: Starting osmo-stp 02:57:40.023854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15622): Launched 02:57:40.344572 run osmo-stp_10.42.42.5(pid=15623): Launched 02:57:40.461139 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:57:41.018965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15625): Launched 02:57:41.133695 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:57:41.412074 run patchelf(pid=15626): Launched 02:57:41.598660 run osmo-stp_10.42.42.5(pid=15623): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15623)] 02:57:41.735431 run osmo-stp_10.42.42.5(pid=15623): stdout: | (launched: 2022-12-09_02:57:40.186438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:41.872598 run osmo-stp_10.42.42.5(pid=15623): stderr: | �[0;m�[38;5;43m20221209025740378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025740378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025740379 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025740379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025740381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025740381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025740381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:42.004678 run osmo-stp_10.42.42.5(pid=15623): stdout: | (launched: 2022-12-09_02:57:40.186438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:42.135709 run osmo-stp_10.42.42.5(pid=15623): stderr: | �[0;m�[38;5;43m20221209025740378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025740378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025740379 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025740379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025740381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025740381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025740381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:42.288652 run patchelf(pid=15626): Terminating (SIGINT) 02:57:42.467532 run patchelf(pid=15626): Terminated: ok {rc=0} 02:57:42.500360 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15623): Process ended prematurely: osmo-stp_10.42.42.5(pid=15623) [trial-2353↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15623)] [trial-2353↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 02:57:42.510196 tst iperf3.py:8: Test FAILED (7.6 sec) 02:57:42.572420 run osmo-hlr_10.42.42.2(pid=15620): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15620)] 02:57:42.623067 run osmo-hlr_10.42.42.2(pid=15620): stdout: | (launched: 2022-12-09_02:57:39.192679) 02:57:42.674138 run osmo-hlr_10.42.42.2(pid=15620): stderr: | �[0;m�[1;31m20221209025739392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209025739392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209025739392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209025739392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209025739392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209025739392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209025739404 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209025739413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209025739413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209025739414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:57:42.717815 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15615): Terminating (SIGTERM) 02:57:42.758900 run iperf3-srv_10.42.42.10(pid=15616): Terminating (SIGTERM) 02:57:42.800126 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15619): Terminating (SIGTERM) 02:57:42.841512 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15622): Terminating (SIGTERM) 02:57:42.882719 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15625): Terminating (SIGTERM) 02:57:42.892287 --- ParallelTerminationStrategy: PID 15615 died... 02:57:42.947744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15615): Terminated: ok {rc=0} 02:57:42.957854 --- ParallelTerminationStrategy: PID 15616 died... 02:57:43.013096 run iperf3-srv_10.42.42.10(pid=15616): Terminated {rc=256} 02:57:43.022988 --- ParallelTerminationStrategy: PID 15619 died... 02:57:43.078226 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15619): Terminated: ok {rc=0} 02:57:43.088194 --- ParallelTerminationStrategy: PID 15622 died... 02:57:43.143498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15622): Terminated: ok {rc=0} 02:57:43.153839 --- ParallelTerminationStrategy: PID 15625 died... 02:57:43.209398 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15625): Terminated: ok {rc=0} 02:57:43.296274 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15623): Process ended prematurely: osmo-stp_10.42.42.5(pid=15623) [trial-2353↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15623)]