Failed
gprs:nanobts+band-1900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26121): Process ended prematurely: osmo-stp_10.42.42.5(pid=26121) [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26121)]
Standard Output
---------------------------------------------- trial-2354 gprs:nanobts+band-1900+mod-bts0-egprs ping.py ---------------------------------------------- 04:40:03.625972 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:03.638191 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:40:03.772793 tst ping.py: using LAC 19132 04:40:03.898344 tst ping.py: using RAC 7 04:40:04.021713 tst ping.py: using CellId 19132 04:40:04.147557 tst ping.py: using BVCI 19133 04:40:04.171780 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.183272 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.194537 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.206106 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.217807 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.229174 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.240760 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:40:04.252577 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:40:04.528247 tst ping.py:19: start network... 04:40:04.651040 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:40:05.122281 run create_hlr_db(pid=26115): Launched 04:40:05.291798 bus /gobi_6: Setting Powered False 04:40:06.312482 run create_hlr_db(pid=26115): Terminated: ok {rc=0} 04:40:06.706939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26117): Launched 04:40:07.001491 run osmo-hlr_10.42.42.2(pid=26118): Launched 04:40:07.107787 run osmo-stp_10.42.42.5: Starting osmo-stp 04:40:07.622171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26120): Launched 04:40:07.917173 run osmo-stp_10.42.42.5(pid=26121): Launched 04:40:08.023739 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:40:08.540089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26123): Launched 04:40:08.644698 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:40:08.902800 run patchelf(pid=26124): Launched 04:40:09.075728 run osmo-stp_10.42.42.5(pid=26121): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26121)] 04:40:09.202001 run osmo-stp_10.42.42.5(pid=26121): stdout: | (launched: 2022-12-09_04:40:07.771325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:40:09.328305 run osmo-stp_10.42.42.5(pid=26121): stderr: | �[0;m�[38;5;43m20221209044007942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044007943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044007943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044007943 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044007944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044007944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044007944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:40:09.450497 run osmo-stp_10.42.42.5(pid=26121): stdout: | (launched: 2022-12-09_04:40:07.771325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:40:09.571715 run osmo-stp_10.42.42.5(pid=26121): stderr: | �[0;m�[38;5;43m20221209044007942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044007943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044007943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044007943 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044007944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044007944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044007944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:40:09.713365 run patchelf(pid=26124): Terminating (SIGINT) 04:40:09.880189 run patchelf(pid=26124): Terminated: ok {rc=0} 04:40:09.910449 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=26121): Process ended prematurely: osmo-stp_10.42.42.5(pid=26121) [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26121)] [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22] 04:40:09.919048 tst ping.py:22: Test FAILED (6.3 sec) 04:40:09.979308 run osmo-hlr_10.42.42.2(pid=26118): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26118)] 04:40:10.028034 run osmo-hlr_10.42.42.2(pid=26118): stdout: | (launched: 2022-12-09_04:40:06.856154) 04:40:10.077681 run osmo-hlr_10.42.42.2(pid=26118): stderr: | �[0;m�[1;31m20221209044007032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209044007032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209044007032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209044007032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209044007032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209044007032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209044007045 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-1900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209044007053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209044007053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209044007053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:40:10.119604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26117): Terminating (SIGTERM) 04:40:10.159103 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26120): Terminating (SIGTERM) 04:40:10.198799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26123): Terminating (SIGTERM) 04:40:10.208102 --- ParallelTerminationStrategy: PID 26117 died... 04:40:10.261410 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26117): Terminated: ok {rc=0} 04:40:10.271070 --- ParallelTerminationStrategy: PID 26120 died... 04:40:10.323889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26120): Terminated: ok {rc=0} 04:40:10.333526 --- ParallelTerminationStrategy: PID 26123 died... 04:40:10.386107 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26123): Terminated: ok {rc=0} 04:40:10.474947 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26121): Process ended prematurely: osmo-stp_10.42.42.5(pid=26121) [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26121)]