Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26528): Process ended prematurely: osmo-stp_10.42.42.5(pid=26528) [trial-2354↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26528)]
Standard Output
---------------------------------------------- trial-2354 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 04:45:44.013899 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.025637 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:45:44.172417 tst iperf3.py: using LAC 19163 04:45:44.298469 tst iperf3.py: using RAC 38 04:45:44.420451 tst iperf3.py: using CellId 19163 04:45:44.546091 tst iperf3.py: using BVCI 19164 04:45:44.570620 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.582002 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.593053 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.604348 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.615758 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.627024 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.638423 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.649678 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:44.661069 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:45:44.953302 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:45:45.088088 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:45:45.422899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26520): Launched 04:45:45.699622 run iperf3-srv_10.42.42.10(pid=26521): Launched 04:45:45.897951 tst iperf3.py:8: start network... 04:45:46.047992 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:45:46.599912 run create_hlr_db(pid=26522): Launched 04:45:46.789588 bus /gobi_6: Setting Powered False 04:45:47.808357 run create_hlr_db(pid=26522): Terminated: ok {rc=0} 04:45:48.210074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26524): Launched 04:45:48.509682 run osmo-hlr_10.42.42.2(pid=26525): Launched 04:45:48.629926 run osmo-stp_10.42.42.5: Starting osmo-stp 04:45:49.155719 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26527): Launched 04:45:49.454950 run osmo-stp_10.42.42.5(pid=26528): Launched 04:45:49.563461 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:45:50.082465 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26530): Launched 04:45:50.188555 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:45:50.448615 run patchelf(pid=26531): Launched 04:45:50.623369 run osmo-stp_10.42.42.5(pid=26528): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26528)] 04:45:50.750941 run osmo-stp_10.42.42.5(pid=26528): stdout: | (launched: 2022-12-09_04:45:49.307996) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:50.879051 run osmo-stp_10.42.42.5(pid=26528): stderr: | �[0;m�[38;5;43m20221209044549479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044549479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044549480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044549480 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044549481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044549481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044549481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:51.002518 run osmo-stp_10.42.42.5(pid=26528): stdout: | (launched: 2022-12-09_04:45:49.307996) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:51.125116 run osmo-stp_10.42.42.5(pid=26528): stderr: | �[0;m�[38;5;43m20221209044549479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209044549479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209044549480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209044549480 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209044549481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209044549481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209044549481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:51.268789 run patchelf(pid=26531): Terminating (SIGINT) 04:45:51.437376 run patchelf(pid=26531): Terminated: ok {rc=0} 04:45:51.468272 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26528): Process ended prematurely: osmo-stp_10.42.42.5(pid=26528) [trial-2354↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26528)] [trial-2354↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 04:45:51.477429 tst iperf3.py:8: Test FAILED (7.5 sec) 04:45:51.537532 run osmo-hlr_10.42.42.2(pid=26525): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26525)] 04:45:51.586501 run osmo-hlr_10.42.42.2(pid=26525): stdout: | (launched: 2022-12-09_04:45:48.361869) 04:45:51.636216 run osmo-hlr_10.42.42.2(pid=26525): stderr: | �[0;m�[1;31m20221209044548538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209044548538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209044548538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209044548538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209044548538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209044548538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209044548550 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209044548561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209044548561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209044548561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:45:51.678210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26520): Terminating (SIGTERM) 04:45:51.717719 run iperf3-srv_10.42.42.10(pid=26521): Terminating (SIGTERM) 04:45:51.757133 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26524): Terminating (SIGTERM) 04:45:51.796489 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26527): Terminating (SIGTERM) 04:45:51.836216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26530): Terminating (SIGTERM) 04:45:51.845656 --- ParallelTerminationStrategy: PID 26520 died... 04:45:51.899208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26520): Terminated: ok {rc=0} 04:45:51.909022 --- ParallelTerminationStrategy: PID 26521 died... 04:45:51.962094 run iperf3-srv_10.42.42.10(pid=26521): Terminated {rc=256} 04:45:51.971851 --- ParallelTerminationStrategy: PID 26524 died... 04:45:52.025065 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26524): Terminated: ok {rc=0} 04:45:52.034771 --- ParallelTerminationStrategy: PID 26527 died... 04:45:52.087876 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26527): Terminated: ok {rc=0} 04:45:52.097931 --- ParallelTerminationStrategy: PID 26530 died... 04:45:52.151219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26530): Terminated: ok {rc=0} 04:45:52.241204 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26528): Process ended prematurely: osmo-stp_10.42.42.5(pid=26528) [trial-2354↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26528)]