Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=21312): Process ended prematurely: osmo-stp_10.42.42.5(pid=21312) [trial-2354↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21312)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 03:58:17.576204 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:17.588619 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 03:58:17.738814 tst ping_idle_ping.py: using LAC 18910 03:58:17.865604 tst ping_idle_ping.py: using RAC 40 03:58:17.990644 tst ping_idle_ping.py: using CellId 18910 03:58:18.117579 tst ping_idle_ping.py: using BVCI 18911 03:58:18.142241 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.153504 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.164430 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.175795 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.187152 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.198448 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.209896 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:58:18.221264 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 03:58:18.497075 tst ping_idle_ping.py:24: start network... 03:58:18.621661 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:58:19.104592 run create_hlr_db(pid=21306): Launched 03:58:19.275857 bus /gobi_6: Setting Powered False 03:58:20.310581 run create_hlr_db(pid=21306): Terminated: ok {rc=0} 03:58:20.738656 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21308): Launched 03:58:21.061207 run osmo-hlr_10.42.42.2(pid=21309): Launched 03:58:21.178180 run osmo-stp_10.42.42.5: Starting osmo-stp 03:58:21.735626 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21311): Launched 03:58:22.058364 run osmo-stp_10.42.42.5(pid=21312): Launched 03:58:22.175314 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:58:22.733834 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21314): Launched 03:58:22.848078 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:58:23.127919 run patchelf(pid=21315): Launched 03:58:23.315389 run osmo-stp_10.42.42.5(pid=21312): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21312)] 03:58:23.452402 run osmo-stp_10.42.42.5(pid=21312): stdout: | (launched: 2022-12-09_03:58:21.898339) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:58:23.589830 run osmo-stp_10.42.42.5(pid=21312): stderr: | �[0;m�[38;5;43m20221209035822093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035822093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035822093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035822094 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035822094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035822094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035822094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:58:23.722582 run osmo-stp_10.42.42.5(pid=21312): stdout: | (launched: 2022-12-09_03:58:21.898339) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:58:23.854409 run osmo-stp_10.42.42.5(pid=21312): stderr: | �[0;m�[38;5;43m20221209035822093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035822093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035822093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035822094 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035822094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035822094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035822094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:58:24.008122 run patchelf(pid=21315): Terminating (SIGINT) 03:58:24.188604 run patchelf(pid=21315): Terminated: ok {rc=0} 03:58:24.221316 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=21312): Process ended prematurely: osmo-stp_10.42.42.5(pid=21312) [trial-2354↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21312)] [trial-2354↪gprs:trx-b200↪ping_idle_ping.py:27] 03:58:24.230688 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 03:58:24.295257 run osmo-hlr_10.42.42.2(pid=21309): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21309)] 03:58:24.347605 run osmo-hlr_10.42.42.2(pid=21309): stdout: | (launched: 2022-12-09_03:58:20.901473) 03:58:24.400457 run osmo-hlr_10.42.42.2(pid=21309): stderr: | �[0;m�[1;31m20221209035821098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035821098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035821098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035821098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035821098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035821098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035821109 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035821118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035821118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035821118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:58:24.445757 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21308): Terminating (SIGTERM) 03:58:24.488351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21311): Terminating (SIGTERM) 03:58:24.530625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21314): Terminating (SIGTERM) 03:58:24.540754 --- ParallelTerminationStrategy: PID 21308 died... 03:58:24.597699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21308): Terminated: ok {rc=0} 03:58:24.608200 --- ParallelTerminationStrategy: PID 21311 died... 03:58:24.665061 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21311): Terminated: ok {rc=0} 03:58:24.675392 --- ParallelTerminationStrategy: PID 21314 died... 03:58:24.731895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21314): Terminated: ok {rc=0} 03:58:24.820107 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21312): Process ended prematurely: osmo-stp_10.42.42.5(pid=21312) [trial-2354↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21312)]