Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=25461): Process ended prematurely: osmo-stp_10.42.42.5(pid=25461) [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25461)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 04:34:26.536755 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:26.548848 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:34:26.709547 tst iperf3.py: using LAC 19102 04:34:26.835230 tst iperf3.py: using RAC 232 04:34:26.959205 tst iperf3.py: using CellId 19102 04:34:27.083228 tst iperf3.py: using BVCI 19103 04:34:27.107780 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.119210 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.131268 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.142937 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.154749 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.167115 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.179320 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.190738 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:27.202830 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:34:27.474446 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:34:27.596644 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:34:27.902767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25453): Launched 04:34:28.156497 run iperf3-srv_10.42.42.10(pid=25454): Launched 04:34:28.335062 tst iperf3.py:8: start network... 04:34:28.457559 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:34:28.930576 run create_hlr_db(pid=25455): Launched 04:34:29.099511 bus /gobi_6: Setting Powered False 04:34:30.122061 run create_hlr_db(pid=25455): Terminated: ok {rc=0} 04:34:30.546362 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25457): Launched 04:34:30.885709 run osmo-hlr_10.42.42.2(pid=25458): Launched 04:34:31.086815 run osmo-stp_10.42.42.5: Starting osmo-stp 04:34:31.760422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25460): Launched 04:34:32.265609 run osmo-stp_10.42.42.5(pid=25461): Launched 04:34:32.398307 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:34:32.951171 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25463): Launched 04:34:33.065711 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:34:33.342601 run patchelf(pid=25464): Launched 04:34:33.528920 run osmo-stp_10.42.42.5(pid=25461): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25461)] 04:34:33.665336 run osmo-stp_10.42.42.5(pid=25461): stdout: | (launched: 2022-12-09_04:34:31.918748) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:34:33.802389 run osmo-stp_10.42.42.5(pid=25461): stderr: | �[0;m�[38;5;43m20221209043432151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043432152 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043432153 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043432155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043432155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043432155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043432155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:34:33.934801 run osmo-stp_10.42.42.5(pid=25461): stdout: | (launched: 2022-12-09_04:34:31.918748) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:34:34.066295 run osmo-stp_10.42.42.5(pid=25461): stderr: | �[0;m�[38;5;43m20221209043432151 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043432152 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043432153 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043432155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043432155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043432155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043432155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:34:34.218951 run patchelf(pid=25464): Terminating (SIGINT) 04:34:34.398147 run patchelf(pid=25464): Terminated: ok {rc=0} 04:34:34.431289 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25461): Process ended prematurely: osmo-stp_10.42.42.5(pid=25461) [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25461)] [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8] 04:34:34.441288 tst iperf3.py:8: Test FAILED (7.9 sec) 04:34:34.506083 run osmo-hlr_10.42.42.2(pid=25458): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25458)] 04:34:34.558589 run osmo-hlr_10.42.42.2(pid=25458): stdout: | (launched: 2022-12-09_04:34:30.707951) 04:34:34.611550 run osmo-hlr_10.42.42.2(pid=25458): stderr: | �[0;m�[1;31m20221209043431012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209043431012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209043431012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209043431012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209043431012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209043431012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209043431027 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209043431043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209043431043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209043431043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:34:34.656814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25453): Terminating (SIGTERM) 04:34:34.699130 run iperf3-srv_10.42.42.10(pid=25454): Terminating (SIGTERM) 04:34:34.741828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25457): Terminating (SIGTERM) 04:34:34.784866 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25460): Terminating (SIGTERM) 04:34:34.827093 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25463): Terminating (SIGTERM) 04:34:34.837267 --- ParallelTerminationStrategy: PID 25453 died... 04:34:34.894079 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25453): Terminated: ok {rc=0} 04:34:34.904170 --- ParallelTerminationStrategy: PID 25454 died... 04:34:34.960101 run iperf3-srv_10.42.42.10(pid=25454): Terminated {rc=256} 04:34:34.970712 --- ParallelTerminationStrategy: PID 25457 died... 04:34:35.026880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25457): Terminated: ok {rc=0} 04:34:35.036913 --- ParallelTerminationStrategy: PID 25460 died... 04:34:35.093628 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25460): Terminated: ok {rc=0} 04:34:35.103712 --- ParallelTerminationStrategy: PID 25463 died... 04:34:35.160169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25463): Terminated: ok {rc=0} 04:34:35.248461 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25461): Process ended prematurely: osmo-stp_10.42.42.5(pid=25461) [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25461)]