Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25352): Process ended prematurely: osmo-stp_10.42.42.5(pid=25352) [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25352)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-lms-limenet-micro+mod-bts0-egprs ping.py ---------------------------------------------- 04:32:56.599753 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:56.611761 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:32:56.755101 tst ping.py: using LAC 19094 04:32:56.880341 tst ping.py: using RAC 224 04:32:56.999448 tst ping.py: using CellId 19094 04:32:57.119794 tst ping.py: using BVCI 19095 04:32:57.143455 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.154752 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.166067 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.177374 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.188546 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.199862 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.211286 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:32:57.222725 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:32:57.503108 tst ping.py:19: start network... 04:32:57.632125 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:32:58.117622 run create_hlr_db(pid=25346): Launched 04:32:58.296448 bus /gobi_6: Setting Powered False 04:32:59.317894 run create_hlr_db(pid=25346): Terminated: ok {rc=0} 04:32:59.707132 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25348): Launched 04:32:59.995328 run osmo-hlr_10.42.42.2(pid=25349): Launched 04:33:00.100777 run osmo-stp_10.42.42.5: Starting osmo-stp 04:33:00.603052 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25351): Launched 04:33:01.032783 run osmo-stp_10.42.42.5(pid=25352): Launched 04:33:01.152530 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:33:01.738441 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25355): Launched 04:33:01.854234 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:33:02.153800 run patchelf(pid=25356): Launched 04:33:02.341313 run osmo-stp_10.42.42.5(pid=25352): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25352)] 04:33:02.475274 run osmo-stp_10.42.42.5(pid=25352): stdout: | (launched: 2022-12-09_04:33:00.748670) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:33:02.609536 run osmo-stp_10.42.42.5(pid=25352): stderr: | �[0;m�[38;5;43m20221209043300916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043300916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043300917 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043300917 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043300918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043300918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043300918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:33:02.739578 run osmo-stp_10.42.42.5(pid=25352): stdout: | (launched: 2022-12-09_04:33:00.748670) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:33:02.867782 run osmo-stp_10.42.42.5(pid=25352): stderr: | �[0;m�[38;5;43m20221209043300916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209043300916 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209043300917 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209043300917 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209043300918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209043300918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209043300918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:33:03.017539 run patchelf(pid=25356): Terminating (SIGINT) 04:33:03.193351 run patchelf(pid=25356): Terminated: ok {rc=0} 04:33:03.225178 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25352): Process ended prematurely: osmo-stp_10.42.42.5(pid=25352) [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25352)] [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22] 04:33:03.234509 tst ping.py:22: Test FAILED (6.6 sec) 04:33:03.299125 run osmo-hlr_10.42.42.2(pid=25349): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25349)] 04:33:03.351903 run osmo-hlr_10.42.42.2(pid=25349): stdout: | (launched: 2022-12-09_04:32:59.853364) 04:33:03.405416 run osmo-hlr_10.42.42.2(pid=25349): stderr: | �[0;m�[1;31m20221209043300027 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209043300027 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209043300027 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209043300027 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209043300027 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209043300027 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209043300040 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-lms-limenet-micro+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209043300050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209043300050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209043300050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:33:03.450719 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25348): Terminating (SIGTERM) 04:33:03.493322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25351): Terminating (SIGTERM) 04:33:03.536375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25355): Terminating (SIGTERM) 04:33:03.546295 --- ParallelTerminationStrategy: PID 25348 died... 04:33:03.603537 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25348): Terminated: ok {rc=0} 04:33:03.613879 --- ParallelTerminationStrategy: PID 25351 died... 04:33:03.670941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25351): Terminated: ok {rc=0} 04:33:03.681278 --- ParallelTerminationStrategy: PID 25355 died... 04:33:03.738009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25355): Terminated: ok {rc=0} 04:33:03.827848 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25352): Process ended prematurely: osmo-stp_10.42.42.5(pid=25352) [trial-2354↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25352)]