Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20602): Process ended prematurely: osmo-stp_10.42.42.5(pid=20602) [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20602)]
Standard Output
---------------------------------------------- trial-2354 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 03:52:03.732155 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:03.743867 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:52:03.898265 tst iperf3.py: using LAC 18876 03:52:04.023296 tst iperf3.py: using RAC 6 03:52:04.148243 tst iperf3.py: using CellId 18876 03:52:04.272818 tst iperf3.py: using BVCI 18877 03:52:04.297331 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.308429 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.319443 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.330770 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.342380 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.353851 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.365240 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.376255 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:52:04.388044 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:52:04.663055 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 03:52:04.787165 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:52:05.095354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20594): Launched 03:52:05.352092 run iperf3-srv_10.42.42.10(pid=20595): Launched 03:52:05.532747 tst iperf3.py:8: start network... 03:52:05.657191 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:52:06.137753 run create_hlr_db(pid=20596): Launched 03:52:06.308615 bus /gobi_6: Setting Powered False 03:52:07.332083 run create_hlr_db(pid=20596): Terminated: ok {rc=0} 03:52:07.759211 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20598): Launched 03:52:08.080425 run osmo-hlr_10.42.42.2(pid=20599): Launched 03:52:08.201693 run osmo-stp_10.42.42.5: Starting osmo-stp 03:52:08.758563 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20601): Launched 03:52:09.078818 run osmo-stp_10.42.42.5(pid=20602): Launched 03:52:09.195091 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:52:09.752589 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20604): Launched 03:52:09.868253 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:52:10.147030 run patchelf(pid=20605): Launched 03:52:10.334503 run osmo-stp_10.42.42.5(pid=20602): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20602)] 03:52:10.471549 run osmo-stp_10.42.42.5(pid=20602): stdout: | (launched: 2022-12-09_03:52:08.921655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:52:10.609637 run osmo-stp_10.42.42.5(pid=20602): stderr: | �[0;m�[38;5;43m20221209035209111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035209112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035209112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035209112 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035209113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035209113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035209113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:52:10.742757 run osmo-stp_10.42.42.5(pid=20602): stdout: | (launched: 2022-12-09_03:52:08.921655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:52:10.874595 run osmo-stp_10.42.42.5(pid=20602): stderr: | �[0;m�[38;5;43m20221209035209111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035209112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035209112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035209112 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035209113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035209113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035209113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:52:11.027849 run patchelf(pid=20605): Terminating (SIGINT) 03:52:11.207770 run patchelf(pid=20605): Terminated: ok {rc=0} 03:52:11.240931 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20602): Process ended prematurely: osmo-stp_10.42.42.5(pid=20602) [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20602)] [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 03:52:11.250883 tst iperf3.py:8: Test FAILED (7.6 sec) 03:52:11.315544 run osmo-hlr_10.42.42.2(pid=20599): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20599)] 03:52:11.367992 run osmo-hlr_10.42.42.2(pid=20599): stdout: | (launched: 2022-12-09_03:52:07.922716) 03:52:11.421203 run osmo-hlr_10.42.42.2(pid=20599): stderr: | �[0;m�[1;31m20221209035208119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035208119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035208119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035208119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035208119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035208119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035208132 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035208140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035208140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035208140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:52:11.466277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20594): Terminating (SIGTERM) 03:52:11.508743 run iperf3-srv_10.42.42.10(pid=20595): Terminating (SIGTERM) 03:52:11.551399 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20598): Terminating (SIGTERM) 03:52:11.594390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20601): Terminating (SIGTERM) 03:52:11.636734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20604): Terminating (SIGTERM) 03:52:11.647697 --- ParallelTerminationStrategy: PID 20594 died... 03:52:11.705076 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20594): Terminated: ok {rc=0} 03:52:11.715241 --- ParallelTerminationStrategy: PID 20595 died... 03:52:11.772146 run iperf3-srv_10.42.42.10(pid=20595): Terminated {rc=256} 03:52:11.782139 --- ParallelTerminationStrategy: PID 20598 died... 03:52:11.839129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20598): Terminated: ok {rc=0} 03:52:11.849299 --- ParallelTerminationStrategy: PID 20601 died... 03:52:11.905954 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20601): Terminated: ok {rc=0} 03:52:11.916019 --- ParallelTerminationStrategy: PID 20604 died... 03:52:11.972454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20604): Terminated: ok {rc=0} 03:52:12.060369 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20602): Process ended prematurely: osmo-stp_10.42.42.5(pid=20602) [trial-2354↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20602)]