Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24236): Process ended prematurely: osmo-stp_10.42.42.5(pid=24236) [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24236)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 04:24:37.791188 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:37.803253 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:24:37.948628 tst iperf3.py: using LAC 19050 04:24:38.077535 tst iperf3.py: using RAC 180 04:24:38.203734 tst iperf3.py: using CellId 19050 04:24:38.334564 tst iperf3.py: using BVCI 19051 04:24:38.359347 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.370759 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.381932 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.393454 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.404730 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.416048 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.428203 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.439258 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:38.450790 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:24:38.744240 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:24:38.880419 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:24:39.219520 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24228): Launched 04:24:39.498598 run iperf3-srv_10.42.42.10(pid=24229): Launched 04:24:39.697065 tst iperf3.py:8: start network... 04:24:39.833358 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:24:40.341535 run create_hlr_db(pid=24230): Launched 04:24:40.536275 bus /gobi_6: Setting Powered False 04:24:41.550271 run create_hlr_db(pid=24230): Terminated: ok {rc=0} 04:24:41.959691 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24232): Launched 04:24:42.263758 run osmo-hlr_10.42.42.2(pid=24233): Launched 04:24:42.376762 run osmo-stp_10.42.42.5: Starting osmo-stp 04:24:42.900767 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24235): Launched 04:24:43.203089 run osmo-stp_10.42.42.5(pid=24236): Launched 04:24:43.315035 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:24:43.841105 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24238): Launched 04:24:43.948161 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:24:44.213059 run patchelf(pid=24239): Launched 04:24:44.388863 run osmo-stp_10.42.42.5(pid=24236): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24236)] 04:24:44.517711 run osmo-stp_10.42.42.5(pid=24236): stdout: | (launched: 2022-12-09_04:24:43.053531) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:24:44.646637 run osmo-stp_10.42.42.5(pid=24236): stderr: | �[0;m�[38;5;43m20221209042443225 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209042443225 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209042443226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209042443226 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209042443226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209042443226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209042443227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:24:44.771139 run osmo-stp_10.42.42.5(pid=24236): stdout: | (launched: 2022-12-09_04:24:43.053531) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:24:44.894582 run osmo-stp_10.42.42.5(pid=24236): stderr: | �[0;m�[38;5;43m20221209042443225 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209042443225 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209042443226 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209042443226 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209042443226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209042443226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209042443227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:24:45.039267 run patchelf(pid=24239): Terminating (SIGINT) 04:24:45.210156 run patchelf(pid=24239): Terminated: ok {rc=0} 04:24:45.241351 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24236): Process ended prematurely: osmo-stp_10.42.42.5(pid=24236) [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24236)] [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 04:24:45.250497 tst iperf3.py:8: Test FAILED (7.5 sec) 04:24:45.311180 run osmo-hlr_10.42.42.2(pid=24233): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24233)] 04:24:45.360554 run osmo-hlr_10.42.42.2(pid=24233): stdout: | (launched: 2022-12-09_04:24:42.114127) 04:24:45.410608 run osmo-hlr_10.42.42.2(pid=24233): stderr: | �[0;m�[1;31m20221209042442289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209042442289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209042442289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209042442289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209042442289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209042442289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209042442301 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209042442311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209042442311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209042442311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:24:45.453075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24228): Terminating (SIGTERM) 04:24:45.492831 run iperf3-srv_10.42.42.10(pid=24229): Terminating (SIGTERM) 04:24:45.532808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24232): Terminating (SIGTERM) 04:24:45.572985 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24235): Terminating (SIGTERM) 04:24:45.612815 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24238): Terminating (SIGTERM) 04:24:45.622181 --- ParallelTerminationStrategy: PID 24228 died... 04:24:45.675541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24228): Terminated: ok {rc=0} 04:24:45.685216 --- ParallelTerminationStrategy: PID 24229 died... 04:24:45.738222 run iperf3-srv_10.42.42.10(pid=24229): Terminated {rc=256} 04:24:45.747734 --- ParallelTerminationStrategy: PID 24232 died... 04:24:45.800916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24232): Terminated: ok {rc=0} 04:24:45.810585 --- ParallelTerminationStrategy: PID 24235 died... 04:24:45.868877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24235): Terminated: ok {rc=0} 04:24:45.879074 --- ParallelTerminationStrategy: PID 24238 died... 04:24:45.951576 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24238): Terminated: ok {rc=0} 04:24:46.037138 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24236): Process ended prematurely: osmo-stp_10.42.42.5(pid=24236) [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24236)]