Failed
gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24267): Process ended prematurely: osmo-stp_10.42.42.5(pid=24267) [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24267)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-lms+mod-bts0-egprs ping.py ---------------------------------------------- 04:25:06.998020 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.010131 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:25:07.156009 tst ping.py: using LAC 19052 04:25:07.284815 tst ping.py: using RAC 182 04:25:07.403463 tst ping.py: using CellId 19052 04:25:07.519062 tst ping.py: using BVCI 19053 04:25:07.542081 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.553065 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.563867 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.574614 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.585373 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.595885 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.606674 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:25:07.617264 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:25:07.889112 tst ping.py:19: start network... 04:25:08.012726 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:25:08.490609 run create_hlr_db(pid=24261): Launched 04:25:08.660410 bus /gobi_6: Setting Powered False 04:25:09.680882 run create_hlr_db(pid=24261): Terminated: ok {rc=0} 04:25:10.104725 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24263): Launched 04:25:10.424804 run osmo-hlr_10.42.42.2(pid=24264): Launched 04:25:10.542941 run osmo-stp_10.42.42.5: Starting osmo-stp 04:25:11.099736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24266): Launched 04:25:11.420184 run osmo-stp_10.42.42.5(pid=24267): Launched 04:25:11.536293 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:25:12.094740 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24269): Launched 04:25:12.208356 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:25:12.487424 run patchelf(pid=24270): Launched 04:25:12.673685 run osmo-stp_10.42.42.5(pid=24267): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24267)] 04:25:12.810617 run osmo-stp_10.42.42.5(pid=24267): stdout: | (launched: 2022-12-09_04:25:11.261291) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:25:12.947344 run osmo-stp_10.42.42.5(pid=24267): stderr: | �[0;m�[38;5;43m20221209042511453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209042511453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209042511453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209042511454 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209042511454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209042511454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209042511454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:25:13.079360 run osmo-stp_10.42.42.5(pid=24267): stdout: | (launched: 2022-12-09_04:25:11.261291) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:25:13.210624 run osmo-stp_10.42.42.5(pid=24267): stderr: | �[0;m�[38;5;43m20221209042511453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209042511453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209042511453 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209042511454 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209042511454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209042511454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209042511454 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:25:13.362950 run patchelf(pid=24270): Terminating (SIGINT) 04:25:13.542094 run patchelf(pid=24270): Terminated: ok {rc=0} 04:25:13.574670 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24267): Process ended prematurely: osmo-stp_10.42.42.5(pid=24267) [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24267)] [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22] 04:25:13.584032 tst ping.py:22: Test FAILED (6.6 sec) 04:25:13.648674 run osmo-hlr_10.42.42.2(pid=24264): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24264)] 04:25:13.701127 run osmo-hlr_10.42.42.2(pid=24264): stdout: | (launched: 2022-12-09_04:25:10.266609) 04:25:13.754252 run osmo-hlr_10.42.42.2(pid=24264): stderr: | �[0;m�[1;31m20221209042510463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209042510463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209042510463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209042510463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209042510463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209042510463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209042510475 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209042510483 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209042510484 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209042510484 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:25:13.799815 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24263): Terminating (SIGTERM) 04:25:13.842495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24266): Terminating (SIGTERM) 04:25:13.885266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24269): Terminating (SIGTERM) 04:25:13.895149 --- ParallelTerminationStrategy: PID 24263 died... 04:25:13.952292 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24263): Terminated: ok {rc=0} 04:25:13.962530 --- ParallelTerminationStrategy: PID 24266 died... 04:25:14.019330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24266): Terminated: ok {rc=0} 04:25:14.029704 --- ParallelTerminationStrategy: PID 24269 died... 04:25:14.086109 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24269): Terminated: ok {rc=0} 04:25:14.175054 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24267): Process ended prematurely: osmo-stp_10.42.42.5(pid=24267) [trial-2354↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24267)]