Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 217 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=2664): Process ended prematurely: osmo-stp_10.42.42.5(pid=2664) [trial-2355↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2664)]

Standard Output

----------------------------------------------
trial-2355 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
06:33:33.426297 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:33.438302 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
06:33:33.594050 tst                        iperf3.py: using LAC 19596
06:33:33.718875 tst                        iperf3.py: using RAC 216
06:33:33.846115 tst                        iperf3.py: using CellId 19596
06:33:33.973326 tst                        iperf3.py: using BVCI 19597
06:33:33.997775 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.009243 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.020287 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.031975 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.043565 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.055277 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.066919 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.078625 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
06:33:34.090418 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
06:33:34.380778 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
06:33:34.514079 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:33:34.841647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2656): Launched
06:33:35.115392 run iperf3-srv_10.42.42.10(pid=2657): Launched
06:33:35.311172 tst                      iperf3.py:8: start network...
06:33:35.442266 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:33:35.910963 run          create_hlr_db(pid=2658): Launched
06:33:36.080344 bus                          /gobi_6: Setting Powered False
06:33:37.103442 run          create_hlr_db(pid=2658): Terminated: ok {rc=0}
06:33:37.497854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2660): Launched
06:33:37.793756 run    osmo-hlr_10.42.42.2(pid=2661): Launched
06:33:37.901833 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:33:38.424748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2663): Launched
06:33:38.743253 run    osmo-stp_10.42.42.5(pid=2664): Launched
06:33:38.858778 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:33:39.413853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2666): Launched
06:33:39.527010 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:33:39.804230 run               patchelf(pid=2667): Launched
06:33:39.991469 run    osmo-stp_10.42.42.5(pid=2664): ERR: Terminated: ERROR {rc=1}  [trial-2355↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2664)]
06:33:40.128245 run    osmo-stp_10.42.42.5(pid=2664): stdout: 
| (launched: 2022-12-09_06:33:38.587655)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:33:40.265035 run    osmo-stp_10.42.42.5(pid=2664): stderr: 
| �[0;m�[38;5;43m20221209063338778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209063338778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209063338778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209063338779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209063338781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209063338781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209063338781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:33:40.398618 run    osmo-stp_10.42.42.5(pid=2664): stdout: 
| (launched: 2022-12-09_06:33:38.587655)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:33:40.530830 run    osmo-stp_10.42.42.5(pid=2664): stderr: 
| �[0;m�[38;5;43m20221209063338778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209063338778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209063338778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209063338779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209063338781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209063338781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209063338781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:33:40.684071 run               patchelf(pid=2667): Terminating (SIGINT)
06:33:40.863677 run               patchelf(pid=2667): Terminated: ok {rc=0}
06:33:40.896663 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2664): Process ended prematurely: osmo-stp_10.42.42.5(pid=2664) [trial-2355↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2664)]  [trial-2355↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
06:33:40.906550 tst                      iperf3.py:8: Test FAILED (7.5 sec)
06:33:40.970351 run    osmo-hlr_10.42.42.2(pid=2661): ERR: Terminated: ERROR {rc=237}  [trial-2355↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2661)]
06:33:41.022261 run    osmo-hlr_10.42.42.2(pid=2661): stdout: 
| (launched: 2022-12-09_06:33:37.647580) 
06:33:41.074653 run    osmo-hlr_10.42.42.2(pid=2661): stderr: 
| �[0;m�[1;31m20221209063337820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209063337820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209063337820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209063337821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209063337821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209063337821 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209063337832 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209063337841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209063337841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209063337841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:33:41.119619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2656): Terminating (SIGTERM)
06:33:41.161872 run iperf3-srv_10.42.42.10(pid=2657): Terminating (SIGTERM)
06:33:41.203752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2660): Terminating (SIGTERM)
06:33:41.245535 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2663): Terminating (SIGTERM)
06:33:41.287595 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2666): Terminating (SIGTERM)
06:33:41.297445 ---      ParallelTerminationStrategy: PID 2656 died...
06:33:41.353961 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2656): Terminated: ok {rc=0}
06:33:41.364233 ---      ParallelTerminationStrategy: PID 2657 died...
06:33:41.419888 run iperf3-srv_10.42.42.10(pid=2657): Terminated {rc=256}
06:33:41.430019 ---      ParallelTerminationStrategy: PID 2660 died...
06:33:41.485398 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2660): Terminated: ok {rc=0}
06:33:41.495542 ---      ParallelTerminationStrategy: PID 2663 died...
06:33:41.551208 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2663): Terminated: ok {rc=0}
06:33:41.561499 ---      ParallelTerminationStrategy: PID 2666 died...
06:33:41.616907 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2666): Terminated: ok {rc=0}
06:33:41.703072 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2664): Process ended prematurely: osmo-stp_10.42.42.5(pid=2664) [trial-2355↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2664)]