Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3420): Process ended prematurely: osmo-stp_10.42.42.5(pid=3420) [trial-2355↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3420)]
Standard Output
---------------------------------------------- trial-2355 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 06:39:43.282136 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.294172 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:39:43.459400 tst iperf3.py: using LAC 19629 06:39:43.587010 tst iperf3.py: using RAC 249 06:39:43.711663 tst iperf3.py: using CellId 19629 06:39:43.827559 tst iperf3.py: using BVCI 19630 06:39:43.850654 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.861837 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.872468 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.883913 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.895163 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.906461 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.917732 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.928810 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:39:43.939995 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:39:44.231662 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:39:44.365898 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:39:44.698787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3412): Launched 06:39:44.975215 run iperf3-srv_10.42.42.10(pid=3413): Launched 06:39:45.172653 tst iperf3.py:8: start network... 06:39:45.307295 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:39:45.824821 run create_hlr_db(pid=3414): Launched 06:39:46.040500 bus /gobi_6: Setting Powered False 06:39:47.068150 run create_hlr_db(pid=3414): Terminated: ok {rc=0} 06:39:47.507280 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3416): Launched 06:39:47.807368 run osmo-hlr_10.42.42.2(pid=3417): Launched 06:39:47.924084 run osmo-stp_10.42.42.5: Starting osmo-stp 06:39:48.452898 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3419): Launched 06:39:48.752575 run osmo-stp_10.42.42.5(pid=3420): Launched 06:39:48.862374 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:39:49.384877 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3422): Launched 06:39:49.491947 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:39:49.753912 run patchelf(pid=3423): Launched 06:39:49.930349 run osmo-stp_10.42.42.5(pid=3420): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3420)] 06:39:50.058864 run osmo-stp_10.42.42.5(pid=3420): stdout: | (launched: 2022-12-09_06:39:48.605269) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:39:50.187816 run osmo-stp_10.42.42.5(pid=3420): stderr: | �[0;m�[38;5;43m20221209063948775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209063948775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209063948775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209063948776 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209063948776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209063948776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209063948776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:39:50.312658 run osmo-stp_10.42.42.5(pid=3420): stdout: | (launched: 2022-12-09_06:39:48.605269) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:39:50.437427 run osmo-stp_10.42.42.5(pid=3420): stderr: | �[0;m�[38;5;43m20221209063948775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209063948775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209063948775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209063948776 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209063948776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209063948776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209063948776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:39:50.581771 run patchelf(pid=3423): Terminating (SIGINT) 06:39:50.751155 run patchelf(pid=3423): Terminated: ok {rc=0} 06:39:50.782191 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3420): Process ended prematurely: osmo-stp_10.42.42.5(pid=3420) [trial-2355↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3420)] [trial-2355↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8] 06:39:50.791427 tst iperf3.py:8: Test FAILED (7.5 sec) 06:39:50.851976 run osmo-hlr_10.42.42.2(pid=3417): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3417)] 06:39:50.900918 run osmo-hlr_10.42.42.2(pid=3417): stdout: | (launched: 2022-12-09_06:39:47.659673) 06:39:50.950717 run osmo-hlr_10.42.42.2(pid=3417): stderr: | �[0;m�[1;31m20221209063947837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209063947837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209063947838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209063947838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209063947838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209063947838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209063947850 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209063947861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209063947861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209063947861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:39:50.993254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3412): Terminating (SIGTERM) 06:39:51.033434 run iperf3-srv_10.42.42.10(pid=3413): Terminating (SIGTERM) 06:39:51.073958 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3416): Terminating (SIGTERM) 06:39:51.114179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3419): Terminating (SIGTERM) 06:39:51.154427 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3422): Terminating (SIGTERM) 06:39:51.164086 --- ParallelTerminationStrategy: PID 3412 died... 06:39:51.217815 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3412): Terminated: ok {rc=0} 06:39:51.227782 --- ParallelTerminationStrategy: PID 3413 died... 06:39:51.281178 run iperf3-srv_10.42.42.10(pid=3413): Terminated {rc=256} 06:39:51.290872 --- ParallelTerminationStrategy: PID 3416 died... 06:39:51.344092 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3416): Terminated: ok {rc=0} 06:39:51.353932 --- ParallelTerminationStrategy: PID 3419 died... 06:39:51.406859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3419): Terminated: ok {rc=0} 06:39:51.416772 --- ParallelTerminationStrategy: PID 3422 died... 06:39:51.470286 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3422): Terminated: ok {rc=0} 06:39:51.554550 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3420): Process ended prematurely: osmo-stp_10.42.42.5(pid=3420) [trial-2355↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3420)]