Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-900.ping.py (from gprs_nanobts+band-900)

Failing for the past 30 builds (Since #2326 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3311): Process ended prematurely: osmo-stp_10.42.42.5(pid=3311) [trial-2355↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3311)]

Standard Output

----------------------------------------------
trial-2355 gprs:nanobts+band-900 ping.py
----------------------------------------------
06:38:11.717237 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:11.730182 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
06:38:11.874054 tst                          ping.py: using LAC 19621
06:38:12.004179 tst                          ping.py: using RAC 241
06:38:12.129826 tst                          ping.py: using CellId 19621
06:38:12.254562 tst                          ping.py: using BVCI 19622
06:38:12.279618 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.291545 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.303406 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.315193 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.326725 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.338338 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.350284 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:38:12.361933 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
06:38:12.658704 tst                       ping.py:19: start network...
06:38:12.794103 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:38:13.352348 run          create_hlr_db(pid=3305): Launched
06:38:13.540752 bus                          /gobi_6: Setting Powered False
06:38:14.564053 run          create_hlr_db(pid=3305): Terminated: ok {rc=0}
06:38:15.015021 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3307): Launched
06:38:15.450377 run    osmo-hlr_10.42.42.2(pid=3308): Launched
06:38:15.686079 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:38:16.317815 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3310): Launched
06:38:16.839495 run    osmo-stp_10.42.42.5(pid=3311): Launched
06:38:16.986709 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:38:17.727128 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3313): Launched
06:38:17.869999 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:38:18.221563 run               patchelf(pid=3314): Launched
06:38:18.445167 run    osmo-stp_10.42.42.5(pid=3311): ERR: Terminated: ERROR {rc=1}  [trial-2355↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3311)]
06:38:18.590319 run    osmo-stp_10.42.42.5(pid=3311): stdout: 
| (launched: 2022-12-09_06:38:16.525361)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:38:18.731017 run    osmo-stp_10.42.42.5(pid=3311): stderr: 
| �[0;m�[38;5;43m20221209063816863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209063816863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209063816864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209063816864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209063816871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209063816871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209063816871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:38:18.866746 run    osmo-stp_10.42.42.5(pid=3311): stdout: 
| (launched: 2022-12-09_06:38:16.525361)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:38:18.999556 run    osmo-stp_10.42.42.5(pid=3311): stderr: 
| �[0;m�[38;5;43m20221209063816863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209063816863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209063816864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209063816864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209063816871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209063816871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209063816871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:38:19.156088 run               patchelf(pid=3314): Terminating (SIGINT)
06:38:19.339605 run               patchelf(pid=3314): Terminated: ok {rc=0}
06:38:19.373445 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=3311): Process ended prematurely: osmo-stp_10.42.42.5(pid=3311) [trial-2355↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3311)]  [trial-2355↪gprs:nanobts+band-900↪ping.py:22]
06:38:19.383418 tst                       ping.py:22: Test FAILED (7.7 sec)
06:38:19.450010 run    osmo-hlr_10.42.42.2(pid=3308): ERR: Terminated: ERROR {rc=237}  [trial-2355↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3308)]
06:38:19.504422 run    osmo-hlr_10.42.42.2(pid=3308): stdout: 
| (launched: 2022-12-09_06:38:15.180527) 
06:38:19.558862 run    osmo-hlr_10.42.42.2(pid=3308): stderr: 
| �[0;m�[1;31m20221209063815488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209063815488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209063815488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209063815488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209063815488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209063815488 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209063815507 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209063815523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209063815524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209063815524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:38:19.604860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3307): Terminating (SIGTERM)
06:38:19.651669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3310): Terminating (SIGTERM)
06:38:19.697889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3313): Terminating (SIGTERM)
06:38:19.708643 ---      ParallelTerminationStrategy: PID 3307 died...
06:38:19.767878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3307): Terminated: ok {rc=0}
06:38:19.778676 ---      ParallelTerminationStrategy: PID 3310 died...
06:38:19.838169 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3310): Terminated: ok {rc=0}
06:38:19.849448 ---      ParallelTerminationStrategy: PID 3313 died...
06:38:19.907446 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3313): Terminated: ok {rc=0}
06:38:19.998101 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3311): Process ended prematurely: osmo-stp_10.42.42.5(pid=3311) [trial-2355↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3311)]