Failed
gprs:trx-lms+mod-bts0-dynts-osmo.ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1439): Process ended prematurely: osmo-stp_10.42.42.5(pid=1439) [trial-2355↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1439)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-lms+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 06:20:07.464456 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:07.475666 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:20:07.631617 tst ping.py: using LAC 19523 06:20:07.745253 tst ping.py: using RAC 143 06:20:07.859542 tst ping.py: using CellId 19523 06:20:07.973218 tst ping.py: using BVCI 19524 06:20:07.995440 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.006177 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.016670 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.027542 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.038367 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.049133 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.059950 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:20:08.070656 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:20:08.338010 tst ping.py:19: start network... 06:20:08.459528 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:20:08.919533 run create_hlr_db(pid=1433): Launched 06:20:09.089978 bus /gobi_6: Setting Powered False 06:20:10.110147 run create_hlr_db(pid=1433): Terminated: ok {rc=0} 06:20:10.526559 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1435): Launched 06:20:10.839141 run osmo-hlr_10.42.42.2(pid=1436): Launched 06:20:10.953887 run osmo-stp_10.42.42.5: Starting osmo-stp 06:20:11.498662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1438): Launched 06:20:11.809955 run osmo-stp_10.42.42.5(pid=1439): Launched 06:20:11.923187 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:20:12.468910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1441): Launched 06:20:12.581212 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:20:12.854887 run patchelf(pid=1442): Launched 06:20:13.039599 run osmo-stp_10.42.42.5(pid=1439): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1439)] 06:20:13.174130 run osmo-stp_10.42.42.5(pid=1439): stdout: | (launched: 2022-12-09_06:20:11.657762) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:20:13.308863 run osmo-stp_10.42.42.5(pid=1439): stderr: | �[0;m�[38;5;43m20221209062011847 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062011847 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062011847 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062011848 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062011848 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062011848 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062011848 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:20:13.438664 run osmo-stp_10.42.42.5(pid=1439): stdout: | (launched: 2022-12-09_06:20:11.657762) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:20:13.567612 run osmo-stp_10.42.42.5(pid=1439): stderr: | �[0;m�[38;5;43m20221209062011847 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062011847 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062011847 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062011848 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062011848 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062011848 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062011848 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:20:13.717278 run patchelf(pid=1442): Terminating (SIGINT) 06:20:13.893391 run patchelf(pid=1442): Terminated: ok {rc=0} 06:20:13.925233 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1439): Process ended prematurely: osmo-stp_10.42.42.5(pid=1439) [trial-2355↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1439)] [trial-2355↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22] 06:20:13.934346 tst ping.py:22: Test FAILED (6.5 sec) 06:20:13.997814 run osmo-hlr_10.42.42.2(pid=1436): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1436)] 06:20:14.049664 run osmo-hlr_10.42.42.2(pid=1436): stdout: | (launched: 2022-12-09_06:20:10.686336) 06:20:14.102301 run osmo-hlr_10.42.42.2(pid=1436): stderr: | �[0;m�[1;31m20221209062010881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209062010881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209062010882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209062010882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209062010882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209062010882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209062010894 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209062010903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209062010903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209062010903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:20:14.147708 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1435): Terminating (SIGTERM) 06:20:14.190280 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1438): Terminating (SIGTERM) 06:20:14.232812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1441): Terminating (SIGTERM) 06:20:14.242967 --- ParallelTerminationStrategy: PID 1435 died... 06:20:14.299827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1435): Terminated: ok {rc=0} 06:20:14.310319 --- ParallelTerminationStrategy: PID 1438 died... 06:20:14.366851 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1438): Terminated: ok {rc=0} 06:20:14.377192 --- ParallelTerminationStrategy: PID 1441 died... 06:20:14.433368 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1441): Terminated: ok {rc=0} 06:20:14.519877 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1439): Process ended prematurely: osmo-stp_10.42.42.5(pid=1439) [trial-2355↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1439)]