Skip to content

Failed

gprs:sysmo+mod-bts0-egprs.ping.py (from gprs_sysmo+mod-bts0-egprs)

Failing for the past 25 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29364): Process ended prematurely: osmo-stp_10.42.42.5(pid=29364) [trial-2355↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29364)]

Standard Output

----------------------------------------------
trial-2355 gprs:sysmo+mod-bts0-egprs ping.py
----------------------------------------------
05:35:39.209288 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.221376 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
05:35:39.355549 tst                          ping.py: using LAC 19287
05:35:39.485564 tst                          ping.py: using RAC 162
05:35:39.615477 tst                          ping.py: using CellId 19287
05:35:39.739758 tst                          ping.py: using BVCI 19288
05:35:39.763448 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.774614 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.785501 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.796507 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.807751 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.819121 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.830629 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
05:35:39.841788 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
05:35:40.125430 tst                       ping.py:19: start network...
05:35:40.254177 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
05:35:40.740931 run         create_hlr_db(pid=29358): Launched
05:35:40.918662 bus                          /gobi_6: Setting Powered False
05:35:41.939540 run         create_hlr_db(pid=29358): Terminated: ok {rc=0}
05:35:42.381211 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29360): Launched
05:35:42.712112 run   osmo-hlr_10.42.42.2(pid=29361): Launched
05:35:42.831221 run              osmo-stp_10.42.42.5: Starting osmo-stp
05:35:43.404519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29363): Launched
05:35:43.735243 run   osmo-stp_10.42.42.5(pid=29364): Launched
05:35:43.854043 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
05:35:44.431175 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29366): Launched
05:35:44.548681 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
05:35:44.837443 run              patchelf(pid=29367): Launched
05:35:45.030845 run   osmo-stp_10.42.42.5(pid=29364): ERR: Terminated: ERROR {rc=1}  [trial-2355↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29364)]
05:35:45.171316 run   osmo-stp_10.42.42.5(pid=29364): stdout: 
| (launched: 2022-12-09_05:35:43.571291)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:35:45.312014 run   osmo-stp_10.42.42.5(pid=29364): stderr: 
| �[0;m�[38;5;43m20221209053543768 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209053543768 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209053543769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209053543769 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209053543770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209053543770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209053543770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:35:45.447672 run   osmo-stp_10.42.42.5(pid=29364): stdout: 
| (launched: 2022-12-09_05:35:43.571291)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:35:45.582404 run   osmo-stp_10.42.42.5(pid=29364): stderr: 
| �[0;m�[38;5;43m20221209053543768 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209053543768 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209053543769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209053543769 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209053543770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209053543770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209053543770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:35:45.739052 run              patchelf(pid=29367): Terminating (SIGINT)
05:35:45.948479 run              patchelf(pid=29367): Terminated: ok {rc=0}
05:35:45.983246 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=29364): Process ended prematurely: osmo-stp_10.42.42.5(pid=29364) [trial-2355↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29364)]  [trial-2355↪gprs:sysmo+mod-bts0-egprs↪ping.py:22]
05:35:45.993514 tst                       ping.py:22: Test FAILED (6.8 sec)
05:35:46.059974 run   osmo-hlr_10.42.42.2(pid=29361): ERR: Terminated: ERROR {rc=237}  [trial-2355↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29361)]
05:35:46.113078 run   osmo-hlr_10.42.42.2(pid=29361): stdout: 
| (launched: 2022-12-09_05:35:42.548759) 
05:35:46.166934 run   osmo-hlr_10.42.42.2(pid=29361): stderr: 
| �[0;m�[1;31m20221209053542750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209053542750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209053542750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209053542751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209053542751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209053542751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209053542763 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209053542772 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209053542772 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209053542772 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
05:35:46.212853 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29360): Terminating (SIGTERM)
05:35:46.256450 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29363): Terminating (SIGTERM)
05:35:46.302142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29366): Terminating (SIGTERM)
05:35:46.312077 ---      ParallelTerminationStrategy: PID 29360 died...
05:35:46.371355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29360): Terminated: ok {rc=0}
05:35:46.382516 ---      ParallelTerminationStrategy: PID 29363 died...
05:35:46.439928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29363): Terminated: ok {rc=0}
05:35:46.450624 ---      ParallelTerminationStrategy: PID 29366 died...
05:35:46.508089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29366): Terminated: ok {rc=0}
05:35:46.597942 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29364): Process ended prematurely: osmo-stp_10.42.42.5(pid=29364) [trial-2355↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29364)]