Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1273): Process ended prematurely: osmo-stp_10.42.42.5(pid=1273) [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1273)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 06:17:39.927282 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:39.938403 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:17:40.083681 tst iperf3.py: using LAC 19511 06:17:40.211201 tst iperf3.py: using RAC 131 06:17:40.330315 tst iperf3.py: using CellId 19511 06:17:40.446702 tst iperf3.py: using BVCI 19512 06:17:40.469473 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.480023 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.490534 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.501727 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.512667 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.523777 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.535089 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.546146 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:40.557394 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:17:40.833840 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:17:40.957576 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:17:41.263236 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1265): Launched 06:17:41.517562 run iperf3-srv_10.42.42.10(pid=1266): Launched 06:17:41.696901 tst iperf3.py:8: start network... 06:17:41.819916 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:17:42.281563 run create_hlr_db(pid=1267): Launched 06:17:42.458034 bus /gobi_6: Setting Powered False 06:17:43.473348 run create_hlr_db(pid=1267): Terminated: ok {rc=0} 06:17:43.866605 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1269): Launched 06:17:44.162038 run osmo-hlr_10.42.42.2(pid=1270): Launched 06:17:44.269697 run osmo-stp_10.42.42.5: Starting osmo-stp 06:17:44.779801 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1272): Launched 06:17:45.073802 run osmo-stp_10.42.42.5(pid=1273): Launched 06:17:45.181092 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:17:45.693983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1275): Launched 06:17:45.798431 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:17:46.108342 run patchelf(pid=1276): Launched 06:17:46.301375 run osmo-stp_10.42.42.5(pid=1273): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1273)] 06:17:46.442622 run osmo-stp_10.42.42.5(pid=1273): stdout: | (launched: 2022-12-09_06:17:44.928856) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:17:46.585070 run osmo-stp_10.42.42.5(pid=1273): stderr: | �[0;m�[38;5;43m20221209061745097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061745097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061745097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061745098 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061745098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061745098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061745098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:17:46.720880 run osmo-stp_10.42.42.5(pid=1273): stdout: | (launched: 2022-12-09_06:17:44.928856) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:17:46.856223 run osmo-stp_10.42.42.5(pid=1273): stderr: | �[0;m�[38;5;43m20221209061745097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061745097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061745097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061745098 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061745098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061745098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061745098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:17:47.012768 run patchelf(pid=1276): Terminating (SIGINT) 06:17:47.194924 run patchelf(pid=1276): Terminated: ok {rc=0} 06:17:47.227386 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1273): Process ended prematurely: osmo-stp_10.42.42.5(pid=1273) [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1273)] [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 06:17:47.237119 tst iperf3.py:8: Test FAILED (7.3 sec) 06:17:47.300380 run osmo-hlr_10.42.42.2(pid=1270): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1270)] 06:17:47.352167 run osmo-hlr_10.42.42.2(pid=1270): stdout: | (launched: 2022-12-09_06:17:44.016482) 06:17:47.404600 run osmo-hlr_10.42.42.2(pid=1270): stderr: | �[0;m�[1;31m20221209061744191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209061744191 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209061744192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209061744192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209061744192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209061744192 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209061744203 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209061744212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209061744212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209061744212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:17:47.449260 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1265): Terminating (SIGTERM) 06:17:47.491629 run iperf3-srv_10.42.42.10(pid=1266): Terminating (SIGTERM) 06:17:47.533916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1269): Terminating (SIGTERM) 06:17:47.575827 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1272): Terminating (SIGTERM) 06:17:47.617803 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1275): Terminating (SIGTERM) 06:17:47.627559 --- ParallelTerminationStrategy: PID 1265 died... 06:17:47.683628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1265): Terminated: ok {rc=0} 06:17:47.693797 --- ParallelTerminationStrategy: PID 1266 died... 06:17:47.749502 run iperf3-srv_10.42.42.10(pid=1266): Terminated {rc=256} 06:17:47.759556 --- ParallelTerminationStrategy: PID 1269 died... 06:17:47.815358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1269): Terminated: ok {rc=0} 06:17:47.825433 --- ParallelTerminationStrategy: PID 1272 died... 06:17:47.881164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1272): Terminated: ok {rc=0} 06:17:47.891262 --- ParallelTerminationStrategy: PID 1275 died... 06:17:47.947216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1275): Terminated: ok {rc=0} 06:17:48.033122 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1273): Process ended prematurely: osmo-stp_10.42.42.5(pid=1273) [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1273)]