Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=748): Process ended prematurely: osmo-stp_10.42.42.5(pid=748) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=748)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 06:10:54.295848 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.307631 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:10:54.472738 tst iperf3.py: using LAC 19474 06:10:54.599533 tst iperf3.py: using RAC 94 06:10:54.725054 tst iperf3.py: using CellId 19474 06:10:54.854775 tst iperf3.py: using BVCI 19475 06:10:54.879211 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.890490 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.901650 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.912684 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.923594 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.934676 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.945845 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.956800 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:54.967982 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:10:55.239777 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:10:55.362757 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:55.668318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=740): Launched 06:10:55.923621 run iperf3-srv_10.42.42.10(pid=741): Launched 06:10:56.103543 tst iperf3.py:8: start network... 06:10:56.226852 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:10:56.694260 run create_hlr_db(pid=742): Launched 06:10:56.864508 bus /gobi_6: Setting Powered False 06:10:57.886858 run create_hlr_db(pid=742): Terminated: ok {rc=0} 06:10:58.306948 run pcap-recorder_any(filters='host 10.42.42.2')(pid=744): Launched 06:10:58.623327 run osmo-hlr_10.42.42.2(pid=745): Launched 06:10:58.742615 run osmo-stp_10.42.42.5: Starting osmo-stp 06:10:59.294955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=747): Launched 06:10:59.612729 run osmo-stp_10.42.42.5(pid=748): Launched 06:10:59.727979 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:11:00.279837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=750): Launched 06:11:00.392670 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:11:00.668105 run patchelf(pid=751): Launched 06:11:00.867058 run osmo-stp_10.42.42.5(pid=748): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=748)] 06:11:01.004817 run osmo-stp_10.42.42.5(pid=748): stdout: | (launched: 2022-12-09_06:10:59.455950) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:01.139819 run osmo-stp_10.42.42.5(pid=748): stderr: | �[0;m�[38;5;43m20221209061059648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061059648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061059648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061059649 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061059649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061059649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061059649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:01.267208 run osmo-stp_10.42.42.5(pid=748): stdout: | (launched: 2022-12-09_06:10:59.455950) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:01.395875 run osmo-stp_10.42.42.5(pid=748): stderr: | �[0;m�[38;5;43m20221209061059648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061059648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061059648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061059649 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061059649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061059649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061059649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:01.543744 run patchelf(pid=751): Terminating (SIGINT) 06:11:01.718655 run patchelf(pid=751): Terminated: ok {rc=0} 06:11:01.751188 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=748): Process ended prematurely: osmo-stp_10.42.42.5(pid=748) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=748)] [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 06:11:01.761566 tst iperf3.py:8: Test FAILED (7.5 sec) 06:11:01.827082 run osmo-hlr_10.42.42.2(pid=745): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=745)] 06:11:01.880260 run osmo-hlr_10.42.42.2(pid=745): stdout: | (launched: 2022-12-09_06:10:58.468232) 06:11:01.935059 run osmo-hlr_10.42.42.2(pid=745): stderr: | �[0;m�[1;31m20221209061058667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209061058667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209061058667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209061058667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209061058667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209061058667 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209061058678 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209061058686 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209061058687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209061058687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:11:01.979307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=740): Terminating (SIGTERM) 06:11:02.023133 run iperf3-srv_10.42.42.10(pid=741): Terminating (SIGTERM) 06:11:02.065771 run pcap-recorder_any(filters='host 10.42.42.2')(pid=744): Terminating (SIGTERM) 06:11:02.111771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=747): Terminating (SIGTERM) 06:11:02.156788 run pcap-recorder_any(filters='host 10.42.42.6')(pid=750): Terminating (SIGTERM) 06:11:02.168637 --- ParallelTerminationStrategy: PID 740 died... 06:11:02.224909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=740): Terminated: ok {rc=0} 06:11:02.234962 --- ParallelTerminationStrategy: PID 741 died... 06:11:02.290906 run iperf3-srv_10.42.42.10(pid=741): Terminated {rc=256} 06:11:02.301024 --- ParallelTerminationStrategy: PID 744 died... 06:11:02.356728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=744): Terminated: ok {rc=0} 06:11:02.366785 --- ParallelTerminationStrategy: PID 747 died... 06:11:02.422360 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=747): Terminated: ok {rc=0} 06:11:02.432358 --- ParallelTerminationStrategy: PID 750 died... 06:11:02.487843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=750): Terminated: ok {rc=0} 06:11:02.574925 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=748): Process ended prematurely: osmo-stp_10.42.42.5(pid=748) [trial-2355↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=748)]