Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11147): Process ended prematurely: osmo-stp_10.42.42.5(pid=11147) [trial-2356↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)]
Standard Output
---------------------------------------------- trial-2356 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 08:06:42.442630 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:42.454902 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:06:42.599906 tst ping.py: using LAC 20087 08:06:42.721126 tst ping.py: using RAC 197 08:06:42.841400 tst ping.py: using CellId 20087 08:06:42.959612 tst ping.py: using BVCI 20088 08:06:42.982604 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:42.993815 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:43.004647 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:43.015540 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:43.026285 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:43.037192 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:43.048168 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:06:43.059036 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:06:43.354303 tst ping.py:19: start network... 08:06:43.489048 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:06:43.998787 run create_hlr_db(pid=11141): Launched 08:06:44.185024 bus /gobi_6: Setting Powered False 08:06:45.205186 run create_hlr_db(pid=11141): Terminated: ok {rc=0} 08:06:45.609025 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11143): Launched 08:06:46.034267 run osmo-hlr_10.42.42.2(pid=11144): Launched 08:06:46.188442 run osmo-stp_10.42.42.5: Starting osmo-stp 08:06:46.779956 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11146): Launched 08:06:47.123290 run osmo-stp_10.42.42.5(pid=11147): Launched 08:06:47.329643 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:06:47.963697 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11149): Launched 08:06:48.069872 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:06:48.333031 run patchelf(pid=11150): Launched 08:06:48.508498 run osmo-stp_10.42.42.5(pid=11147): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)] 08:06:48.636285 run osmo-stp_10.42.42.5(pid=11147): stdout: | (launched: 2022-12-09_08:06:46.948214) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:48.764511 run osmo-stp_10.42.42.5(pid=11147): stderr: | �[0;m�[38;5;43m20221209080647317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080647317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080647318 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080647318 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080647318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080647319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080647319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:48.889141 run osmo-stp_10.42.42.5(pid=11147): stdout: | (launched: 2022-12-09_08:06:46.948214) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:06:49.012154 run osmo-stp_10.42.42.5(pid=11147): stderr: | �[0;m�[38;5;43m20221209080647317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080647317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080647318 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080647318 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080647318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080647319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080647319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:06:49.154695 run patchelf(pid=11150): Terminating (SIGINT) 08:06:49.322428 run patchelf(pid=11150): Terminated: ok {rc=0} 08:06:49.352903 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11147): Process ended prematurely: osmo-stp_10.42.42.5(pid=11147) [trial-2356↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)] [trial-2356↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 08:06:49.361628 tst ping.py:22: Test FAILED (6.9 sec) 08:06:49.421592 run osmo-hlr_10.42.42.2(pid=11144): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11144)] 08:06:49.469705 run osmo-hlr_10.42.42.2(pid=11144): stdout: | (launched: 2022-12-09_08:06:45.761520) 08:06:49.518396 run osmo-hlr_10.42.42.2(pid=11144): stderr: | �[0;m�[1;31m20221209080645959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209080645959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209080645959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209080645959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209080645959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209080645959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209080645970 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209080645984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209080645984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209080645984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:06:49.559793 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11143): Terminating (SIGTERM) 08:06:49.598808 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11146): Terminating (SIGTERM) 08:06:49.637838 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11149): Terminating (SIGTERM) 08:06:49.646985 --- ParallelTerminationStrategy: PID 11143 died... 08:06:49.699394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11143): Terminated: ok {rc=0} 08:06:49.708912 --- ParallelTerminationStrategy: PID 11146 died... 08:06:49.761094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11146): Terminated: ok {rc=0} 08:06:49.770602 --- ParallelTerminationStrategy: PID 11149 died... 08:06:49.822775 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11149): Terminated: ok {rc=0} 08:06:49.905789 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11147): Process ended prematurely: osmo-stp_10.42.42.5(pid=11147) [trial-2356↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)]