Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=6489): Process ended prematurely: osmo-stp_10.42.42.5(pid=6489) [trial-2356↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6489)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:19:47.690876 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:47.702403 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:19:47.868278 tst cs_paging_gprs_active.py: using LAC 19838 07:19:47.996525 tst cs_paging_gprs_active.py: using RAC 203 07:19:48.124628 tst cs_paging_gprs_active.py: using CellId 19838 07:19:48.255205 tst cs_paging_gprs_active.py: using BVCI 19839 07:19:48.280538 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.291931 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.303615 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.315035 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.326314 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.337672 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.349124 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.360407 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:19:48.371800 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:19:48.496727 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:19:48.787723 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:19:48.917896 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:19:49.241302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6479): Launched 07:19:49.510062 run iperf3-srv_10.42.42.10(pid=6480): Launched 07:19:49.699488 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:19:49.829025 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:19:50.150034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6481): Launched 07:19:50.416681 run iperf3-srv_10.42.42.10(pid=6482): Launched 07:19:50.605661 tst cs_paging_gprs_active.py:38: start network... 07:19:50.734974 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:19:51.224813 run create_hlr_db(pid=6483): Launched 07:19:51.402906 bus /gobi_6: Setting Powered False 07:19:52.425021 run create_hlr_db(pid=6483): Terminated: ok {rc=0} 07:19:52.838069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6485): Launched 07:19:53.150058 run osmo-hlr_10.42.42.2(pid=6486): Launched 07:19:53.272019 run osmo-stp_10.42.42.5: Starting osmo-stp 07:19:53.816758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6488): Launched 07:19:54.127407 run osmo-stp_10.42.42.5(pid=6489): Launched 07:19:54.240777 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:19:54.782865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6491): Launched 07:19:54.893655 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:19:55.164644 run patchelf(pid=6492): Launched 07:19:55.346219 run osmo-stp_10.42.42.5(pid=6489): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6489)] 07:19:55.478385 run osmo-stp_10.42.42.5(pid=6489): stdout: | (launched: 2022-12-09_07:19:53.974549) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:19:55.610787 run osmo-stp_10.42.42.5(pid=6489): stderr: | �[0;m�[38;5;43m20221209071954146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071954146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071954146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071954147 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071954147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071954147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071954147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:19:55.739259 run osmo-stp_10.42.42.5(pid=6489): stdout: | (launched: 2022-12-09_07:19:53.974549) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:19:55.866804 run osmo-stp_10.42.42.5(pid=6489): stderr: | �[0;m�[38;5;43m20221209071954146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071954146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071954146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071954147 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071954147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071954147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071954147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:19:56.014572 run patchelf(pid=6492): Terminating (SIGINT) 07:19:56.187583 run patchelf(pid=6492): Terminated: ok {rc=0} 07:19:56.219462 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6489): Process ended prematurely: osmo-stp_10.42.42.5(pid=6489) [trial-2356↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6489)] [trial-2356↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:19:56.228812 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 07:19:56.289468 run osmo-hlr_10.42.42.2(pid=6486): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6486)] 07:19:56.338948 run osmo-hlr_10.42.42.2(pid=6486): stdout: | (launched: 2022-12-09_07:19:52.996056) 07:19:56.389072 run osmo-hlr_10.42.42.2(pid=6486): stderr: | �[0;m�[1;31m20221209071953172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209071953172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209071953172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209071953172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209071953172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209071953172 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209071953184 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209071953192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209071953192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209071953192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:19:56.431200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6479): Terminating (SIGTERM) 07:19:56.471118 run iperf3-srv_10.42.42.10(pid=6480): Terminating (SIGTERM) 07:19:56.511096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6481): Terminating (SIGTERM) 07:19:56.550788 run iperf3-srv_10.42.42.10(pid=6482): Terminating (SIGTERM) 07:19:56.590816 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6485): Terminating (SIGTERM) 07:19:56.630689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6488): Terminating (SIGTERM) 07:19:56.670631 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6491): Terminating (SIGTERM) 07:19:56.679936 --- ParallelTerminationStrategy: PID 6479 died... 07:19:56.733531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6479): Terminated: ok {rc=0} 07:19:56.743061 --- ParallelTerminationStrategy: PID 6480 died... 07:19:56.796000 run iperf3-srv_10.42.42.10(pid=6480): Terminated {rc=256} 07:19:56.805745 --- ParallelTerminationStrategy: PID 6481 died... 07:19:56.858978 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6481): Terminated: ok {rc=0} 07:19:56.868460 --- ParallelTerminationStrategy: PID 6482 died... 07:19:56.921869 run iperf3-srv_10.42.42.10(pid=6482): Terminated {rc=256} 07:19:56.931585 --- ParallelTerminationStrategy: PID 6485 died... 07:19:56.984711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6485): Terminated: ok {rc=0} 07:19:56.994452 --- ParallelTerminationStrategy: PID 6488 died... 07:19:57.047469 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6488): Terminated: ok {rc=0} 07:19:57.057258 --- ParallelTerminationStrategy: PID 6491 died... 07:19:57.110404 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6491): Terminated: ok {rc=0} 07:19:57.194658 bus /gobi_0: Setting Powered False 07:19:58.303598 bus /gobi_0: Setting Powered False 07:19:59.412844 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6489): Process ended prematurely: osmo-stp_10.42.42.5(pid=6489) [trial-2356↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6489)]