Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7956): Process ended prematurely: osmo-stp_10.42.42.5(pid=7956) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7956)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:36:55.174235 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.185662 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:36:55.352629 tst cs_paging_gprs_active.py: using LAC 19929 07:36:55.481962 tst cs_paging_gprs_active.py: using RAC 39 07:36:55.613928 tst cs_paging_gprs_active.py: using CellId 19929 07:36:55.740227 tst cs_paging_gprs_active.py: using BVCI 19930 07:36:55.765292 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.776674 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.787934 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.799207 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.810476 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.821818 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.833610 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.844843 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:36:55.856262 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:36:55.975711 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:36:56.256515 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:36:56.384500 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:36:56.701186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7946): Launched 07:36:56.963170 run iperf3-srv_10.42.42.10(pid=7947): Launched 07:36:57.149336 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:36:57.281649 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:36:57.619363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7948): Launched 07:36:57.899523 run iperf3-srv_10.42.42.10(pid=7949): Launched 07:36:58.100452 tst cs_paging_gprs_active.py:38: start network... 07:36:58.237252 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:36:58.759558 run create_hlr_db(pid=7950): Launched 07:36:58.948878 bus /gobi_6: Setting Powered False 07:36:59.971470 run create_hlr_db(pid=7950): Terminated: ok {rc=0} 07:37:00.381465 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7952): Launched 07:37:00.686995 run osmo-hlr_10.42.42.2(pid=7953): Launched 07:37:00.807826 run osmo-stp_10.42.42.5: Starting osmo-stp 07:37:01.410838 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7955): Launched 07:37:01.754549 run osmo-stp_10.42.42.5(pid=7956): Launched 07:37:02.016498 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:37:02.605299 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7958): Launched 07:37:02.715216 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:37:02.989186 run patchelf(pid=7959): Launched 07:37:03.167563 run osmo-stp_10.42.42.5(pid=7956): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7956)] 07:37:03.297899 run osmo-stp_10.42.42.5(pid=7956): stdout: | (launched: 2022-12-09_07:37:01.568638) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:37:03.428521 run osmo-stp_10.42.42.5(pid=7956): stderr: | �[0;m�[38;5;43m20221209073701918 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073701918 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073701918 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073701918 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073701919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073701919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073701919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:37:03.554764 run osmo-stp_10.42.42.5(pid=7956): stdout: | (launched: 2022-12-09_07:37:01.568638) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:37:03.680332 run osmo-stp_10.42.42.5(pid=7956): stderr: | �[0;m�[38;5;43m20221209073701918 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073701918 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073701918 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073701918 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073701919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073701919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073701919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:37:03.826051 run patchelf(pid=7959): Terminating (SIGINT) 07:37:03.996800 run patchelf(pid=7959): Terminated: ok {rc=0} 07:37:04.028172 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7956): Process ended prematurely: osmo-stp_10.42.42.5(pid=7956) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7956)] [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:37:04.037601 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 07:37:04.098167 run osmo-hlr_10.42.42.2(pid=7953): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7953)] 07:37:04.147030 run osmo-hlr_10.42.42.2(pid=7953): stdout: | (launched: 2022-12-09_07:37:00.536618) 07:37:04.196746 run osmo-hlr_10.42.42.2(pid=7953): stderr: | �[0;m�[1;31m20221209073700711 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209073700711 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209073700711 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209073700711 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209073700711 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209073700711 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209073700724 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209073700733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209073700733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209073700733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:37:04.238448 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7946): Terminating (SIGTERM) 07:37:04.277838 run iperf3-srv_10.42.42.10(pid=7947): Terminating (SIGTERM) 07:37:04.317460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7948): Terminating (SIGTERM) 07:37:04.357129 run iperf3-srv_10.42.42.10(pid=7949): Terminating (SIGTERM) 07:37:04.397187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7952): Terminating (SIGTERM) 07:37:04.437034 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7955): Terminating (SIGTERM) 07:37:04.476615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7958): Terminating (SIGTERM) 07:37:04.486138 --- ParallelTerminationStrategy: PID 7946 died... 07:37:04.539464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7946): Terminated: ok {rc=0} 07:37:04.549890 --- ParallelTerminationStrategy: PID 7947 died... 07:37:04.602574 run iperf3-srv_10.42.42.10(pid=7947): Terminated {rc=256} 07:37:04.612490 --- ParallelTerminationStrategy: PID 7948 died... 07:37:04.665519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7948): Terminated: ok {rc=0} 07:37:04.675239 --- ParallelTerminationStrategy: PID 7949 died... 07:37:04.728287 run iperf3-srv_10.42.42.10(pid=7949): Terminated {rc=256} 07:37:04.738349 --- ParallelTerminationStrategy: PID 7952 died... 07:37:04.791471 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7952): Terminated: ok {rc=0} 07:37:04.801213 --- ParallelTerminationStrategy: PID 7955 died... 07:37:04.854079 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7955): Terminated: ok {rc=0} 07:37:04.863945 --- ParallelTerminationStrategy: PID 7958 died... 07:37:04.916618 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7958): Terminated: ok {rc=0} 07:37:05.004201 bus /gobi_0: Setting Powered False 07:37:06.107995 bus /gobi_0: Setting Powered False 07:37:07.218435 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7956): Process ended prematurely: osmo-stp_10.42.42.5(pid=7956) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7956)]