Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8405): Process ended prematurely: osmo-stp_10.42.42.5(pid=8405) [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8405)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping.py ---------------------------------------------- 07:39:37.932009 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:37.944536 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 07:39:38.089192 tst ping.py: using LAC 19942 07:39:38.206196 tst ping.py: using RAC 52 07:39:38.320036 tst ping.py: using CellId 19942 07:39:38.435939 tst ping.py: using BVCI 19943 07:39:38.458244 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.469571 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.480574 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.491943 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.503145 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.514467 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.525881 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:39:38.537306 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 07:39:38.820554 tst ping.py:19: start network... 07:39:38.952191 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:39:39.450219 run create_hlr_db(pid=8399): Launched 07:39:39.629829 bus /gobi_6: Setting Powered False 07:39:40.649974 run create_hlr_db(pid=8399): Terminated: ok {rc=0} 07:39:41.039696 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8401): Launched 07:39:41.330173 run osmo-hlr_10.42.42.2(pid=8402): Launched 07:39:41.441222 run osmo-stp_10.42.42.5: Starting osmo-stp 07:39:41.948935 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8404): Launched 07:39:42.239511 run osmo-stp_10.42.42.5(pid=8405): Launched 07:39:42.344889 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:39:42.853331 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8407): Launched 07:39:42.957579 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:39:43.212256 run patchelf(pid=8408): Launched 07:39:43.389544 run osmo-stp_10.42.42.5(pid=8405): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8405)] 07:39:43.514011 run osmo-stp_10.42.42.5(pid=8405): stdout: | (launched: 2022-12-09_07:39:42.096293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:39:43.638780 run osmo-stp_10.42.42.5(pid=8405): stderr: | �[0;m�[38;5;43m20221209073942261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073942261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073942262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073942262 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073942262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073942263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073942263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:39:43.759157 run osmo-stp_10.42.42.5(pid=8405): stdout: | (launched: 2022-12-09_07:39:42.096293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:39:43.878659 run osmo-stp_10.42.42.5(pid=8405): stderr: | �[0;m�[38;5;43m20221209073942261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073942261 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073942262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073942262 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073942262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073942263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073942263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:39:44.016834 run patchelf(pid=8408): Terminating (SIGINT) 07:39:44.178796 run patchelf(pid=8408): Terminated: ok {rc=0} 07:39:44.208579 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8405): Process ended prematurely: osmo-stp_10.42.42.5(pid=8405) [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8405)] [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22] 07:39:44.217300 tst ping.py:22: Test FAILED (6.3 sec) 07:39:44.276680 run osmo-hlr_10.42.42.2(pid=8402): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8402)] 07:39:44.325089 run osmo-hlr_10.42.42.2(pid=8402): stdout: | (launched: 2022-12-09_07:39:41.186922) 07:39:44.374075 run osmo-hlr_10.42.42.2(pid=8402): stderr: | �[0;m�[1;31m20221209073941355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209073941355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209073941355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209073941355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209073941355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209073941355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209073941368 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209073941378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209073941378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209073941378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:39:44.415664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8401): Terminating (SIGTERM) 07:39:44.454975 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8404): Terminating (SIGTERM) 07:39:44.494176 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8407): Terminating (SIGTERM) 07:39:44.503181 --- ParallelTerminationStrategy: PID 8401 died... 07:39:44.555908 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8401): Terminated: ok {rc=0} 07:39:44.565596 --- ParallelTerminationStrategy: PID 8404 died... 07:39:44.617738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8404): Terminated: ok {rc=0} 07:39:44.627267 --- ParallelTerminationStrategy: PID 8407 died... 07:39:44.679245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8407): Terminated: ok {rc=0} 07:39:44.766235 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8405): Process ended prematurely: osmo-stp_10.42.42.5(pid=8405) [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8405)]