Failed
gprs:trx-b200+mod-bts0-egprs.iperf3.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6434): Process ended prematurely: osmo-stp_10.42.42.5(pid=6434) [trial-2356↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6434)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-b200+mod-bts0-egprs iperf3.py ---------------------------------------------- 07:19:00.727606 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:00.739675 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:19:00.902172 tst iperf3.py: using LAC 19834 07:19:01.044382 tst iperf3.py: using RAC 199 07:19:01.172490 tst iperf3.py: using CellId 19834 07:19:01.304404 tst iperf3.py: using BVCI 19835 07:19:01.330967 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.343058 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.354980 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.366826 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.378725 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.390513 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.402653 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.414460 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:19:01.426434 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:19:01.730528 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:19:01.872781 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:19:02.228405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6426): Launched 07:19:02.515158 run iperf3-srv_10.42.42.10(pid=6427): Launched 07:19:02.719098 tst iperf3.py:8: start network... 07:19:02.858343 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:19:03.390257 run create_hlr_db(pid=6428): Launched 07:19:03.582353 bus /gobi_6: Setting Powered False 07:19:04.603777 run create_hlr_db(pid=6428): Terminated: ok {rc=0} 07:19:05.020011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6430): Launched 07:19:05.333613 run osmo-hlr_10.42.42.2(pid=6431): Launched 07:19:05.455793 run osmo-stp_10.42.42.5: Starting osmo-stp 07:19:05.999239 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6433): Launched 07:19:06.310864 run osmo-stp_10.42.42.5(pid=6434): Launched 07:19:06.424023 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:19:06.966034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6436): Launched 07:19:07.077120 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:19:07.348064 run patchelf(pid=6437): Launched 07:19:07.529466 run osmo-stp_10.42.42.5(pid=6434): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6434)] 07:19:07.661829 run osmo-stp_10.42.42.5(pid=6434): stdout: | (launched: 2022-12-09_07:19:06.156890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:19:07.794924 run osmo-stp_10.42.42.5(pid=6434): stderr: | �[0;m�[38;5;43m20221209071906327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071906327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071906328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071906328 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071906329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071906329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071906329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:19:07.923249 run osmo-stp_10.42.42.5(pid=6434): stdout: | (launched: 2022-12-09_07:19:06.156890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:19:08.050521 run osmo-stp_10.42.42.5(pid=6434): stderr: | �[0;m�[38;5;43m20221209071906327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071906327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071906328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071906328 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071906329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071906329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071906329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:19:08.198635 run patchelf(pid=6437): Terminating (SIGINT) 07:19:08.371806 run patchelf(pid=6437): Terminated: ok {rc=0} 07:19:08.403619 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6434): Process ended prematurely: osmo-stp_10.42.42.5(pid=6434) [trial-2356↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6434)] [trial-2356↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8] 07:19:08.413098 tst iperf3.py:8: Test FAILED (7.7 sec) 07:19:08.474665 run osmo-hlr_10.42.42.2(pid=6431): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6431)] 07:19:08.524792 run osmo-hlr_10.42.42.2(pid=6431): stdout: | (launched: 2022-12-09_07:19:05.177732) 07:19:08.575680 run osmo-hlr_10.42.42.2(pid=6431): stderr: | �[0;m�[1;31m20221209071905352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209071905352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209071905352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209071905352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209071905352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209071905352 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209071905366 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-b200+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209071905374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209071905374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209071905374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:19:08.618353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6426): Terminating (SIGTERM) 07:19:08.658640 run iperf3-srv_10.42.42.10(pid=6427): Terminating (SIGTERM) 07:19:08.698916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6430): Terminating (SIGTERM) 07:19:08.739262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6433): Terminating (SIGTERM) 07:19:08.779713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6436): Terminating (SIGTERM) 07:19:08.789359 --- ParallelTerminationStrategy: PID 6426 died... 07:19:08.843676 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6426): Terminated: ok {rc=0} 07:19:08.853422 --- ParallelTerminationStrategy: PID 6427 died... 07:19:08.907290 run iperf3-srv_10.42.42.10(pid=6427): Terminated {rc=256} 07:19:08.917204 --- ParallelTerminationStrategy: PID 6430 died... 07:19:08.970943 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6430): Terminated: ok {rc=0} 07:19:08.980901 --- ParallelTerminationStrategy: PID 6433 died... 07:19:09.034861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6433): Terminated: ok {rc=0} 07:19:09.044628 --- ParallelTerminationStrategy: PID 6436 died... 07:19:09.098767 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6436): Terminated: ok {rc=0} 07:19:09.188936 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6434): Process ended prematurely: osmo-stp_10.42.42.5(pid=6434) [trial-2356↪gprs:trx-b200+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6434)]