Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8307): Process ended prematurely: osmo-stp_10.42.42.5(pid=8307) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8307)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 07:38:08.190553 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.203159 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:38:08.363312 tst iperf3.py: using LAC 19935 07:38:08.487412 tst iperf3.py: using RAC 45 07:38:08.610649 tst iperf3.py: using CellId 19935 07:38:08.730510 tst iperf3.py: using BVCI 19936 07:38:08.754623 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.766482 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.778301 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.790350 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.802044 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.816218 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.828083 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.840032 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:38:08.851881 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:38:09.143241 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:38:09.272448 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:38:09.601661 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8299): Launched 07:38:09.885526 run iperf3-srv_10.42.42.10(pid=8300): Launched 07:38:10.074825 tst iperf3.py:8: start network... 07:38:10.202323 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:38:10.736392 run create_hlr_db(pid=8301): Launched 07:38:10.914917 bus /gobi_6: Setting Powered False 07:38:11.940014 run create_hlr_db(pid=8301): Terminated: ok {rc=0} 07:38:12.363356 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8303): Launched 07:38:12.771813 run osmo-hlr_10.42.42.2(pid=8304): Launched 07:38:12.997501 run osmo-stp_10.42.42.5: Starting osmo-stp 07:38:13.624120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8306): Launched 07:38:14.027949 run osmo-stp_10.42.42.5(pid=8307): Launched 07:38:14.260887 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:38:14.856356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8309): Launched 07:38:14.967624 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:38:15.254569 run patchelf(pid=8310): Launched 07:38:15.435772 run osmo-stp_10.42.42.5(pid=8307): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8307)] 07:38:15.570657 run osmo-stp_10.42.42.5(pid=8307): stdout: | (launched: 2022-12-09_07:38:13.781369) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:38:15.705474 run osmo-stp_10.42.42.5(pid=8307): stderr: | �[0;m�[38;5;43m20221209073814106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073814106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073814106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073814106 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073814107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073814107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073814107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:38:15.843496 run osmo-stp_10.42.42.5(pid=8307): stdout: | (launched: 2022-12-09_07:38:13.781369) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:38:16.013472 run osmo-stp_10.42.42.5(pid=8307): stderr: | �[0;m�[38;5;43m20221209073814106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073814106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073814106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073814106 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073814107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073814107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073814107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:38:16.162286 run patchelf(pid=8310): Terminating (SIGINT) 07:38:16.382856 run patchelf(pid=8310): Terminated: ok {rc=0} 07:38:16.424360 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8307): Process ended prematurely: osmo-stp_10.42.42.5(pid=8307) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8307)] [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 07:38:16.436533 tst iperf3.py:8: Test FAILED (8.3 sec) 07:38:16.506226 run osmo-hlr_10.42.42.2(pid=8304): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8304)] 07:38:16.562970 run osmo-hlr_10.42.42.2(pid=8304): stdout: | (launched: 2022-12-09_07:38:12.521267) 07:38:16.628443 run osmo-hlr_10.42.42.2(pid=8304): stderr: | �[0;m�[1;31m20221209073812858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209073812858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209073812858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209073812858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209073812858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209073812858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209073812879 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209073812892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209073812892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209073812892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:38:16.679969 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8299): Terminating (SIGTERM) 07:38:16.730317 run iperf3-srv_10.42.42.10(pid=8300): Terminating (SIGTERM) 07:38:16.780611 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8303): Terminating (SIGTERM) 07:38:16.831915 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8306): Terminating (SIGTERM) 07:38:16.880645 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8309): Terminating (SIGTERM) 07:38:16.892809 --- ParallelTerminationStrategy: PID 8299 died... 07:38:16.960154 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8299): Terminated: ok {rc=0} 07:38:16.972149 --- ParallelTerminationStrategy: PID 8300 died... 07:38:17.035688 run iperf3-srv_10.42.42.10(pid=8300): Terminated {rc=256} 07:38:17.047421 --- ParallelTerminationStrategy: PID 8303 died... 07:38:17.110892 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8303): Terminated: ok {rc=0} 07:38:17.122404 --- ParallelTerminationStrategy: PID 8306 died... 07:38:17.184254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8306): Terminated: ok {rc=0} 07:38:17.196226 --- ParallelTerminationStrategy: PID 8309 died... 07:38:17.259574 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8309): Terminated: ok {rc=0} 07:38:17.385272 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8307): Process ended prematurely: osmo-stp_10.42.42.5(pid=8307) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8307)]