Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16269): Process ended prematurely: osmo-stp_10.42.42.5(pid=16269) [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16269)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 08:49:31.635255 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:31.647988 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:49:31.833146 tst iperf3.py: using LAC 20310 08:49:31.969060 tst iperf3.py: using RAC 165 08:49:32.093362 tst iperf3.py: using CellId 20310 08:49:32.217469 tst iperf3.py: using BVCI 20311 08:49:32.242113 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.254332 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.266404 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.279372 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.291915 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.303823 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.316691 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.328873 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:32.341655 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:49:32.628552 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:49:32.758738 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:49:33.081497 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16261): Launched 08:49:33.350763 run iperf3-srv_10.42.42.10(pid=16262): Launched 08:49:33.541111 tst iperf3.py:8: start network... 08:49:33.671161 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:49:34.172463 run create_hlr_db(pid=16263): Launched 08:49:34.350658 bus /gobi_6: Setting Powered False 08:49:35.373307 run create_hlr_db(pid=16263): Terminated: ok {rc=0} 08:49:35.814468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16265): Launched 08:49:36.149143 run osmo-hlr_10.42.42.2(pid=16266): Launched 08:49:36.271640 run osmo-stp_10.42.42.5: Starting osmo-stp 08:49:36.850211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16268): Launched 08:49:37.184049 run osmo-stp_10.42.42.5(pid=16269): Launched 08:49:37.305920 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:49:37.885432 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16271): Launched 08:49:38.005415 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:49:38.295203 run patchelf(pid=16272): Launched 08:49:38.489508 run osmo-stp_10.42.42.5(pid=16269): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16269)] 08:49:38.631558 run osmo-stp_10.42.42.5(pid=16269): stdout: | (launched: 2022-12-09_08:49:37.020553) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:49:38.773597 run osmo-stp_10.42.42.5(pid=16269): stderr: | �[0;m�[38;5;43m20221209084937211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084937211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084937211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084937212 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084937212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084937212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084937212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:49:38.910891 run osmo-stp_10.42.42.5(pid=16269): stdout: | (launched: 2022-12-09_08:49:37.020553) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:49:39.047925 run osmo-stp_10.42.42.5(pid=16269): stderr: | �[0;m�[38;5;43m20221209084937211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084937211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084937211 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084937212 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084937212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084937212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084937212 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:49:39.206764 run patchelf(pid=16272): Terminating (SIGINT) 08:49:39.393434 run patchelf(pid=16272): Terminated: ok {rc=0} 08:49:39.427413 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16269): Process ended prematurely: osmo-stp_10.42.42.5(pid=16269) [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16269)] [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 08:49:39.437433 tst iperf3.py:8: Test FAILED (7.8 sec) 08:49:39.502036 run osmo-hlr_10.42.42.2(pid=16266): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16266)] 08:49:39.554327 run osmo-hlr_10.42.42.2(pid=16266): stdout: | (launched: 2022-12-09_08:49:35.984652) 08:49:39.607224 run osmo-hlr_10.42.42.2(pid=16266): stderr: | �[0;m�[1;31m20221209084936181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209084936181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209084936181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209084936181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209084936181 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209084936182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209084936194 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209084936202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209084936202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209084936203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:49:39.652060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16261): Terminating (SIGTERM) 08:49:39.694638 run iperf3-srv_10.42.42.10(pid=16262): Terminating (SIGTERM) 08:49:39.737505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16265): Terminating (SIGTERM) 08:49:39.779950 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16268): Terminating (SIGTERM) 08:49:39.822651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16271): Terminating (SIGTERM) 08:49:39.832615 --- ParallelTerminationStrategy: PID 16261 died... 08:49:39.889208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16261): Terminated: ok {rc=0} 08:49:39.899574 --- ParallelTerminationStrategy: PID 16262 died... 08:49:39.956061 run iperf3-srv_10.42.42.10(pid=16262): Terminated {rc=256} 08:49:39.966480 --- ParallelTerminationStrategy: PID 16265 died... 08:49:40.023628 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16265): Terminated: ok {rc=0} 08:49:40.033811 --- ParallelTerminationStrategy: PID 16268 died... 08:49:40.090547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16268): Terminated: ok {rc=0} 08:49:40.100666 --- ParallelTerminationStrategy: PID 16271 died... 08:49:40.157549 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16271): Terminated: ok {rc=0} 08:49:40.245870 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16269): Process ended prematurely: osmo-stp_10.42.42.5(pid=16269) [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16269)]