Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22833): Process ended prematurely: osmo-stp_10.42.42.5(pid=22833) [trial-2358↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22833)]
Standard Output
---------------------------------------------- trial-2358 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 09:59:10.219896 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.231337 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 09:59:10.384353 tst cs_paging_gprs_active.py: using LAC 20677 09:59:10.513116 tst cs_paging_gprs_active.py: using RAC 22 09:59:10.634237 tst cs_paging_gprs_active.py: using CellId 20677 09:59:10.753137 tst cs_paging_gprs_active.py: using BVCI 20678 09:59:10.776685 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.787669 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.798477 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.809878 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.821032 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.832193 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.843419 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.854442 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:59:10.865647 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:59:10.982418 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:59:11.280593 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:59:11.418575 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:59:11.759013 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22823): Launched 09:59:12.042051 run iperf3-srv_10.42.42.10(pid=22824): Launched 09:59:12.243048 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:59:12.380146 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:59:12.718744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22825): Launched 09:59:13.000056 run iperf3-srv_10.42.42.10(pid=22826): Launched 09:59:13.201136 tst cs_paging_gprs_active.py:38: start network... 09:59:13.337865 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:59:13.854113 run create_hlr_db(pid=22827): Launched 09:59:14.044050 bus /gobi_6: Setting Powered False 09:59:15.065611 run create_hlr_db(pid=22827): Terminated: ok {rc=0} 09:59:15.501349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22829): Launched 09:59:15.850520 run osmo-hlr_10.42.42.2(pid=22830): Launched 09:59:16.051153 run osmo-stp_10.42.42.5: Starting osmo-stp 09:59:16.636585 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22832): Launched 09:59:17.086444 run osmo-stp_10.42.42.5(pid=22833): Launched 09:59:17.368259 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:59:17.948730 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22835): Launched 09:59:18.066312 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:59:18.353631 run patchelf(pid=22836): Launched 09:59:18.546137 run osmo-stp_10.42.42.5(pid=22833): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22833)] 09:59:18.686449 run osmo-stp_10.42.42.5(pid=22833): stdout: | (launched: 2022-12-09_09:59:16.796206) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:59:18.827523 run osmo-stp_10.42.42.5(pid=22833): stderr: | �[0;m�[38;5;43m20221209095917142 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209095917142 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209095917143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209095917144 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209095917145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209095917145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209095917145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:59:18.963769 run osmo-stp_10.42.42.5(pid=22833): stdout: | (launched: 2022-12-09_09:59:16.796206) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:59:19.099649 run osmo-stp_10.42.42.5(pid=22833): stderr: | �[0;m�[38;5;43m20221209095917142 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209095917142 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209095917143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209095917144 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209095917145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209095917145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209095917145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:59:19.256768 run patchelf(pid=22836): Terminating (SIGINT) 09:59:19.441433 run patchelf(pid=22836): Terminated: ok {rc=0} 09:59:19.475195 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22833): Process ended prematurely: osmo-stp_10.42.42.5(pid=22833) [trial-2358↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22833)] [trial-2358↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 09:59:19.485295 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 09:59:19.549992 run osmo-hlr_10.42.42.2(pid=22830): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22830)] 09:59:19.602413 run osmo-hlr_10.42.42.2(pid=22830): stdout: | (launched: 2022-12-09_09:59:15.668543) 09:59:19.655236 run osmo-hlr_10.42.42.2(pid=22830): stderr: | �[0;m�[1;31m20221209095915935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209095915935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209095915935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209095915935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209095915935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209095915935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209095915957 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209095915976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209095915977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209095915977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:59:19.700257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22823): Terminating (SIGTERM) 09:59:19.743341 run iperf3-srv_10.42.42.10(pid=22824): Terminating (SIGTERM) 09:59:19.786303 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22825): Terminating (SIGTERM) 09:59:19.828564 run iperf3-srv_10.42.42.10(pid=22826): Terminating (SIGTERM) 09:59:19.871439 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22829): Terminating (SIGTERM) 09:59:19.913990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22832): Terminating (SIGTERM) 09:59:19.956648 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22835): Terminating (SIGTERM) 09:59:19.966515 --- ParallelTerminationStrategy: PID 22823 died... 09:59:20.023528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22823): Terminated: ok {rc=0} 09:59:20.034122 --- ParallelTerminationStrategy: PID 22824 died... 09:59:20.090956 run iperf3-srv_10.42.42.10(pid=22824): Terminated {rc=256} 09:59:20.101179 --- ParallelTerminationStrategy: PID 22825 died... 09:59:20.157703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22825): Terminated: ok {rc=0} 09:59:20.168155 --- ParallelTerminationStrategy: PID 22826 died... 09:59:20.224927 run iperf3-srv_10.42.42.10(pid=22826): Terminated {rc=256} 09:59:20.235209 --- ParallelTerminationStrategy: PID 22829 died... 09:59:20.291930 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22829): Terminated: ok {rc=0} 09:59:20.302294 --- ParallelTerminationStrategy: PID 22832 died... 09:59:20.358969 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22832): Terminated: ok {rc=0} 09:59:20.369531 --- ParallelTerminationStrategy: PID 22835 died... 09:59:20.426034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22835): Terminated: ok {rc=0} 09:59:20.514884 bus /gobi_0: Setting Powered False 09:59:21.622928 bus /gobi_0: Setting Powered False 09:59:22.731672 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22833): Process ended prematurely: osmo-stp_10.42.42.5(pid=22833) [trial-2358↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22833)]