Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 28 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=22677): Process ended prematurely: osmo-stp_10.42.42.5(pid=22677) [trial-2358↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22677)]

Standard Output

----------------------------------------------
trial-2358 gprs:sysmo ping_idle_ping.py
----------------------------------------------
09:57:00.890025 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:00.901769 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
09:57:01.038901 tst                ping_idle_ping.py: using LAC 20666
09:57:01.167004 tst                ping_idle_ping.py: using RAC 11
09:57:01.300648 tst                ping_idle_ping.py: using CellId 20666
09:57:01.425216 tst                ping_idle_ping.py: using BVCI 20667
09:57:01.449140 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.460147 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.471243 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.482266 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.493123 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.504003 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.515251 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:57:01.526727 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
09:57:01.879240 tst             ping_idle_ping.py:24: start network...
09:57:02.019080 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:57:02.512917 run         create_hlr_db(pid=22671): Launched
09:57:02.682330 bus                          /gobi_6: Setting Powered False
09:57:03.704594 run         create_hlr_db(pid=22671): Terminated: ok {rc=0}
09:57:04.097842 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22673): Launched
09:57:04.392314 run   osmo-hlr_10.42.42.2(pid=22674): Launched
09:57:04.507512 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:57:05.024588 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22676): Launched
09:57:05.319771 run   osmo-stp_10.42.42.5(pid=22677): Launched
09:57:05.426514 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:57:05.945100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22679): Launched
09:57:06.050320 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:57:06.307875 run              patchelf(pid=22680): Launched
09:57:06.481254 run   osmo-stp_10.42.42.5(pid=22677): ERR: Terminated: ERROR {rc=1}  [trial-2358↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22677)]
09:57:06.608088 run   osmo-stp_10.42.42.5(pid=22677): stdout: 
| (launched: 2022-12-09_09:57:05.174380)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:57:06.735215 run   osmo-stp_10.42.42.5(pid=22677): stderr: 
| �[0;m�[38;5;43m20221209095705345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209095705345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209095705346 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209095705346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209095705346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209095705347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209095705347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:57:06.858003 run   osmo-stp_10.42.42.5(pid=22677): stdout: 
| (launched: 2022-12-09_09:57:05.174380)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:57:06.979633 run   osmo-stp_10.42.42.5(pid=22677): stderr: 
| �[0;m�[38;5;43m20221209095705345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209095705345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209095705346 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209095705346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209095705346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209095705347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209095705347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:57:07.121128 run              patchelf(pid=22680): Terminating (SIGINT)
09:57:07.286844 run              patchelf(pid=22680): Terminated: ok {rc=0}
09:57:07.317110 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=22677): Process ended prematurely: osmo-stp_10.42.42.5(pid=22677) [trial-2358↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22677)]  [trial-2358↪gprs:sysmo↪ping_idle_ping.py:27]
09:57:07.325625 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
09:57:07.384932 run   osmo-hlr_10.42.42.2(pid=22674): ERR: Terminated: ERROR {rc=237}  [trial-2358↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22674)]
09:57:07.434159 run   osmo-hlr_10.42.42.2(pid=22674): stdout: 
| (launched: 2022-12-09_09:57:04.247395) 
09:57:07.484546 run   osmo-hlr_10.42.42.2(pid=22674): stderr: 
| �[0;m�[1;31m20221209095704423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209095704423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209095704423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209095704423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209095704423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209095704424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209095704436 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209095704444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209095704445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209095704445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:57:07.526501 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22673): Terminating (SIGTERM)
09:57:07.566100 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22676): Terminating (SIGTERM)
09:57:07.605662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22679): Terminating (SIGTERM)
09:57:07.614781 ---      ParallelTerminationStrategy: PID 22673 died...
09:57:07.667678 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22673): Terminated: ok {rc=0}
09:57:07.677296 ---      ParallelTerminationStrategy: PID 22676 died...
09:57:07.730142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22676): Terminated: ok {rc=0}
09:57:07.739740 ---      ParallelTerminationStrategy: PID 22679 died...
09:57:07.792319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22679): Terminated: ok {rc=0}
09:57:07.880173 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22677): Process ended prematurely: osmo-stp_10.42.42.5(pid=22677) [trial-2358↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22677)]