Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=25397): Process ended prematurely: osmo-stp_10.42.42.5(pid=25397) [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25397)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 10:16:43.435730 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:43.447102 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 10:16:43.588483 tst cs_paging_gprs_active.py: using LAC 20770 10:16:43.710692 tst cs_paging_gprs_active.py: using RAC 115 10:16:43.833072 tst cs_paging_gprs_active.py: using CellId 20770 10:16:43.955091 tst cs_paging_gprs_active.py: using BVCI 20771 10:16:43.978621 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:43.989903 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.000843 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.011876 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.022851 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.033855 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.044853 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.055748 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:16:44.066979 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:16:44.186450 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:16:44.468333 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:16:44.597101 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:16:44.918062 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25387): Launched 10:16:45.186187 run iperf3-srv_10.42.42.10(pid=25388): Launched 10:16:45.372901 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:16:45.500550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:16:45.820861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25389): Launched 10:16:46.142248 run iperf3-srv_10.42.42.10(pid=25390): Launched 10:16:46.350493 tst cs_paging_gprs_active.py:38: start network... 10:16:46.492013 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:16:47.078428 run create_hlr_db(pid=25391): Launched 10:16:47.271193 bus /gobi_6: Setting Powered False 10:16:48.277978 run create_hlr_db(pid=25391): Terminated: ok {rc=0} 10:16:48.727023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25393): Launched 10:16:49.058924 run osmo-hlr_10.42.42.2(pid=25394): Launched 10:16:49.182616 run osmo-stp_10.42.42.5: Starting osmo-stp 10:16:49.755594 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25396): Launched 10:16:50.086691 run osmo-stp_10.42.42.5(pid=25397): Launched 10:16:50.206525 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:16:50.783729 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25399): Launched 10:16:50.902432 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:16:51.191756 run patchelf(pid=25400): Launched 10:16:51.384283 run osmo-stp_10.42.42.5(pid=25397): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25397)] 10:16:51.524313 run osmo-stp_10.42.42.5(pid=25397): stdout: | (launched: 2022-12-09_10:16:49.922960) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:16:51.665474 run osmo-stp_10.42.42.5(pid=25397): stderr: | �[0;m�[38;5;43m20221209101650113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101650113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101650113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101650114 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101650114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101650114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101650114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:16:51.801925 run osmo-stp_10.42.42.5(pid=25397): stdout: | (launched: 2022-12-09_10:16:49.922960) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:16:51.937216 run osmo-stp_10.42.42.5(pid=25397): stderr: | �[0;m�[38;5;43m20221209101650113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101650113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101650113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101650114 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101650114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101650114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101650114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:16:52.094086 run patchelf(pid=25400): Terminating (SIGINT) 10:16:52.278123 run patchelf(pid=25400): Terminated: ok {rc=0} 10:16:52.312089 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25397): Process ended prematurely: osmo-stp_10.42.42.5(pid=25397) [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25397)] [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 10:16:52.322217 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 10:16:52.386921 run osmo-hlr_10.42.42.2(pid=25394): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25394)] 10:16:52.439131 run osmo-hlr_10.42.42.2(pid=25394): stdout: | (launched: 2022-12-09_10:16:48.894839) 10:16:52.492015 run osmo-hlr_10.42.42.2(pid=25394): stderr: | �[0;m�[1;31m20221209101649092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101649092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101649092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101649092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101649092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101649092 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101649105 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101649114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101649114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101649114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:16:52.537050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25387): Terminating (SIGTERM) 10:16:52.579527 run iperf3-srv_10.42.42.10(pid=25388): Terminating (SIGTERM) 10:16:52.622495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25389): Terminating (SIGTERM) 10:16:52.664493 run iperf3-srv_10.42.42.10(pid=25390): Terminating (SIGTERM) 10:16:52.707222 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25393): Terminating (SIGTERM) 10:16:52.749288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25396): Terminating (SIGTERM) 10:16:52.791770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25399): Terminating (SIGTERM) 10:16:52.801284 --- ParallelTerminationStrategy: PID 25387 died... 10:16:52.857809 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25387): Terminated: ok {rc=0} 10:16:52.868238 --- ParallelTerminationStrategy: PID 25388 died... 10:16:52.924781 run iperf3-srv_10.42.42.10(pid=25388): Terminated {rc=256} 10:16:52.934858 --- ParallelTerminationStrategy: PID 25389 died... 10:16:52.991282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25389): Terminated: ok {rc=0} 10:16:53.001403 --- ParallelTerminationStrategy: PID 25390 died... 10:16:53.057448 run iperf3-srv_10.42.42.10(pid=25390): Terminated {rc=256} 10:16:53.067478 --- ParallelTerminationStrategy: PID 25393 died... 10:16:53.123494 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25393): Terminated: ok {rc=0} 10:16:53.134199 --- ParallelTerminationStrategy: PID 25396 died... 10:16:53.190546 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25396): Terminated: ok {rc=0} 10:16:53.200512 --- ParallelTerminationStrategy: PID 25399 died... 10:16:53.256419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25399): Terminated: ok {rc=0} 10:16:53.343761 bus /gobi_0: Setting Powered False 10:16:54.451506 bus /gobi_0: Setting Powered False 10:16:55.559974 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25397): Process ended prematurely: osmo-stp_10.42.42.5(pid=25397) [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25397)]