Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=24585): Process ended prematurely: osmo-stp_10.42.42.5(pid=24585) [trial-2358↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24585)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 10:12:40.616881 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:40.627536 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:12:40.762323 tst cs_paging_gprs_active.py: using LAC 20750 10:12:40.880922 tst cs_paging_gprs_active.py: using RAC 95 10:12:41.001056 tst cs_paging_gprs_active.py: using CellId 20750 10:12:41.121512 tst cs_paging_gprs_active.py: using BVCI 20751 10:12:41.144635 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.155126 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.165428 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.175633 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.186001 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.196144 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.206545 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.216828 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:12:41.227373 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:12:41.346731 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:12:41.638257 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:12:41.774827 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:12:42.111541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24575): Launched 10:12:42.390833 run iperf3-srv_10.42.42.10(pid=24576): Launched 10:12:42.590056 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:12:42.725492 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:12:43.062856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24577): Launched 10:12:43.342845 run iperf3-srv_10.42.42.10(pid=24578): Launched 10:12:43.542067 tst cs_paging_gprs_active.py:38: start network... 10:12:43.677212 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:12:44.189612 run create_hlr_db(pid=24579): Launched 10:12:44.377332 bus /sierra_2: Setting Powered False 10:12:45.398774 run create_hlr_db(pid=24579): Terminated: ok {rc=0} 10:12:45.804621 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24581): Launched 10:12:46.140245 run osmo-hlr_10.42.42.2(pid=24582): Launched 10:12:46.288052 run osmo-stp_10.42.42.5: Starting osmo-stp 10:12:46.972475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24584): Launched 10:12:47.407692 run osmo-stp_10.42.42.5(pid=24585): Launched 10:12:47.528003 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:12:48.097897 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24587): Launched 10:12:48.214312 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:12:48.498929 run patchelf(pid=24588): Launched 10:12:48.689818 run osmo-stp_10.42.42.5(pid=24585): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24585)] 10:12:48.828922 run osmo-stp_10.42.42.5(pid=24585): stdout: | (launched: 2022-12-09_10:12:47.128881) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:12:48.968794 run osmo-stp_10.42.42.5(pid=24585): stderr: | �[0;m�[38;5;43m20221209101247353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101247353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101247354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101247354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101247355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101247355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101247355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:12:49.104083 run osmo-stp_10.42.42.5(pid=24585): stdout: | (launched: 2022-12-09_10:12:47.128881) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:12:49.238196 run osmo-stp_10.42.42.5(pid=24585): stderr: | �[0;m�[38;5;43m20221209101247353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101247353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101247354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101247354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101247355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101247355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101247355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:12:49.393972 run patchelf(pid=24588): Terminating (SIGINT) 10:12:49.576084 run patchelf(pid=24588): Terminated: ok {rc=0} 10:12:49.609608 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24585): Process ended prematurely: osmo-stp_10.42.42.5(pid=24585) [trial-2358↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24585)] [trial-2358↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 10:12:49.619651 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:12:49.684047 run osmo-hlr_10.42.42.2(pid=24582): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24582)] 10:12:49.736216 run osmo-hlr_10.42.42.2(pid=24582): stdout: | (launched: 2022-12-09_10:12:45.979575) 10:12:49.789135 run osmo-hlr_10.42.42.2(pid=24582): stderr: | �[0;m�[1;31m20221209101246358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101246358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101246358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101246358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101246358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101246358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101246383 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101246404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101246412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101246412 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:12:49.834327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24575): Terminating (SIGTERM) 10:12:49.877200 run iperf3-srv_10.42.42.10(pid=24576): Terminating (SIGTERM) 10:12:49.919529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24577): Terminating (SIGTERM) 10:12:49.961900 run iperf3-srv_10.42.42.10(pid=24578): Terminating (SIGTERM) 10:12:50.005041 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24581): Terminating (SIGTERM) 10:12:50.047748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24584): Terminating (SIGTERM) 10:12:50.089995 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24587): Terminating (SIGTERM) 10:12:50.100114 --- ParallelTerminationStrategy: PID 24575 died... 10:12:50.157697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24575): Terminated: ok {rc=0} 10:12:50.167915 --- ParallelTerminationStrategy: PID 24576 died... 10:12:50.224235 run iperf3-srv_10.42.42.10(pid=24576): Terminated {rc=256} 10:12:50.234401 --- ParallelTerminationStrategy: PID 24577 died... 10:12:50.290699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24577): Terminated: ok {rc=0} 10:12:50.301078 --- ParallelTerminationStrategy: PID 24578 died... 10:12:50.357175 run iperf3-srv_10.42.42.10(pid=24578): Terminated {rc=256} 10:12:50.367557 --- ParallelTerminationStrategy: PID 24581 died... 10:12:50.424073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24581): Terminated: ok {rc=0} 10:12:50.434607 --- ParallelTerminationStrategy: PID 24584 died... 10:12:50.491071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24584): Terminated: ok {rc=0} 10:12:50.501434 --- ParallelTerminationStrategy: PID 24587 died... 10:12:50.557860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24587): Terminated: ok {rc=0} 10:12:50.646327 bus /gobi_0: Setting Powered False 10:12:51.751022 bus /gobi_0: Setting Powered False 10:12:52.858162 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24585): Process ended prematurely: osmo-stp_10.42.42.5(pid=24585) [trial-2358↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24585)]