Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27705): Process ended prematurely: osmo-stp_10.42.42.5(pid=27705) [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27705)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 10:42:08.314362 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.326471 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:42:08.493617 tst iperf3.py: using LAC 20904 10:42:08.620900 tst iperf3.py: using RAC 249 10:42:08.747943 tst iperf3.py: using CellId 20904 10:42:08.875325 tst iperf3.py: using BVCI 20905 10:42:08.900182 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.911386 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.922497 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.933808 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.945090 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.956421 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.967609 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.978606 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:42:08.990480 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:42:09.270160 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:42:09.395911 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:42:09.712217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27697): Launched 10:42:09.974156 run iperf3-srv_10.42.42.10(pid=27698): Launched 10:42:10.157859 tst iperf3.py:8: start network... 10:42:10.283683 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:42:10.774124 run create_hlr_db(pid=27699): Launched 10:42:10.955890 bus /gobi_6: Setting Powered False 10:42:11.973018 run create_hlr_db(pid=27699): Terminated: ok {rc=0} 10:42:12.405808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27701): Launched 10:42:12.734792 run osmo-hlr_10.42.42.2(pid=27702): Launched 10:42:12.853090 run osmo-stp_10.42.42.5: Starting osmo-stp 10:42:13.420439 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27704): Launched 10:42:13.749802 run osmo-stp_10.42.42.5(pid=27705): Launched 10:42:13.870403 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:42:14.439665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27707): Launched 10:42:14.556410 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:42:14.842564 run patchelf(pid=27708): Launched 10:42:15.033561 run osmo-stp_10.42.42.5(pid=27705): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27705)] 10:42:15.175960 run osmo-stp_10.42.42.5(pid=27705): stdout: | (launched: 2022-12-09_10:42:13.585516) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:42:15.315069 run osmo-stp_10.42.42.5(pid=27705): stderr: | �[0;m�[38;5;43m20221209104213772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209104213772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209104213772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209104213773 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209104213773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209104213773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209104213773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:42:15.450231 run osmo-stp_10.42.42.5(pid=27705): stdout: | (launched: 2022-12-09_10:42:13.585516) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:42:15.583818 run osmo-stp_10.42.42.5(pid=27705): stderr: | �[0;m�[38;5;43m20221209104213772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209104213772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209104213772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209104213773 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209104213773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209104213773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209104213773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:42:15.738844 run patchelf(pid=27708): Terminating (SIGINT) 10:42:15.949713 run patchelf(pid=27708): Terminated: ok {rc=0} 10:42:15.985327 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27705): Process ended prematurely: osmo-stp_10.42.42.5(pid=27705) [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27705)] [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 10:42:15.996545 tst iperf3.py:8: Test FAILED (7.7 sec) 10:42:16.065975 run osmo-hlr_10.42.42.2(pid=27702): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27702)] 10:42:16.121997 run osmo-hlr_10.42.42.2(pid=27702): stdout: | (launched: 2022-12-09_10:42:12.571583) 10:42:16.177002 run osmo-hlr_10.42.42.2(pid=27702): stderr: | �[0;m�[1;31m20221209104212765 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209104212766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209104212766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209104212766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209104212766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209104212766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209104212779 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209104212789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209104212789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209104212789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:42:16.223184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27697): Terminating (SIGTERM) 10:42:16.270667 run iperf3-srv_10.42.42.10(pid=27698): Terminating (SIGTERM) 10:42:16.317260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27701): Terminating (SIGTERM) 10:42:16.363833 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27704): Terminating (SIGTERM) 10:42:16.410434 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27707): Terminating (SIGTERM) 10:42:16.420914 --- ParallelTerminationStrategy: PID 27697 died... 10:42:16.481057 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27697): Terminated: ok {rc=0} 10:42:16.492236 --- ParallelTerminationStrategy: PID 27698 died... 10:42:16.552225 run iperf3-srv_10.42.42.10(pid=27698): Terminated {rc=256} 10:42:16.563589 --- ParallelTerminationStrategy: PID 27701 died... 10:42:16.624323 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27701): Terminated: ok {rc=0} 10:42:16.635542 --- ParallelTerminationStrategy: PID 27704 died... 10:42:16.695722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27704): Terminated: ok {rc=0} 10:42:16.707112 --- ParallelTerminationStrategy: PID 27707 died... 10:42:16.767219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27707): Terminated: ok {rc=0} 10:42:16.890008 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27705): Process ended prematurely: osmo-stp_10.42.42.5(pid=27705) [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27705)]