Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=27477): Process ended prematurely: osmo-stp_10.42.42.5(pid=27477) [trial-2358↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27477)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 10:38:56.026661 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.037167 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 10:38:56.172737 tst cs_paging_gprs_active.py: using LAC 20888 10:38:56.292242 tst cs_paging_gprs_active.py: using RAC 233 10:38:56.411397 tst cs_paging_gprs_active.py: using CellId 20888 10:38:56.528859 tst cs_paging_gprs_active.py: using BVCI 20889 10:38:56.552095 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.562770 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.573060 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.583453 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.593698 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.603982 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.614444 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.624608 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:38:56.635068 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 10:38:56.753218 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 10:38:57.033754 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:38:57.160244 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:38:57.478215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27467): Launched 10:38:57.742679 run iperf3-srv_10.42.42.10(pid=27468): Launched 10:38:57.928413 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:38:58.055223 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:38:58.372217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27469): Launched 10:38:58.636480 run iperf3-srv_10.42.42.10(pid=27470): Launched 10:38:58.820759 tst cs_paging_gprs_active.py:38: start network... 10:38:58.947230 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:38:59.438692 run create_hlr_db(pid=27471): Launched 10:38:59.612792 bus /sierra_2: Setting Powered False 10:39:00.635177 run create_hlr_db(pid=27471): Terminated: ok {rc=0} 10:39:01.082589 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27473): Launched 10:39:01.540352 run osmo-hlr_10.42.42.2(pid=27474): Launched 10:39:01.765472 run osmo-stp_10.42.42.5: Starting osmo-stp 10:39:02.319172 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27476): Launched 10:39:02.626319 run osmo-stp_10.42.42.5(pid=27477): Launched 10:39:02.736724 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:39:03.270537 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27479): Launched 10:39:03.378663 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:39:03.645458 run patchelf(pid=27480): Launched 10:39:03.823189 run osmo-stp_10.42.42.5(pid=27477): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27477)] 10:39:03.952551 run osmo-stp_10.42.42.5(pid=27477): stdout: | (launched: 2022-12-09_10:39:02.475192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:39:04.082297 run osmo-stp_10.42.42.5(pid=27477): stderr: | �[0;m�[38;5;43m20221209103902644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103902644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103902644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103902645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103902645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103902645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103902645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:39:04.207671 run osmo-stp_10.42.42.5(pid=27477): stdout: | (launched: 2022-12-09_10:39:02.475192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:39:04.332181 run osmo-stp_10.42.42.5(pid=27477): stderr: | �[0;m�[38;5;43m20221209103902644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209103902644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209103902644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209103902645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209103902645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209103902645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209103902645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:39:04.477585 run patchelf(pid=27480): Terminating (SIGINT) 10:39:04.647744 run patchelf(pid=27480): Terminated: ok {rc=0} 10:39:04.679105 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27477): Process ended prematurely: osmo-stp_10.42.42.5(pid=27477) [trial-2358↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27477)] [trial-2358↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 10:39:04.688353 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:39:04.749200 run osmo-hlr_10.42.42.2(pid=27474): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27474)] 10:39:04.798732 run osmo-hlr_10.42.42.2(pid=27474): stdout: | (launched: 2022-12-09_10:39:01.241480) 10:39:04.848918 run osmo-hlr_10.42.42.2(pid=27474): stderr: | �[0;m�[1;31m20221209103901447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209103901448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209103901448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209103901448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209103901448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209103901448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209103901465 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209103901481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209103901481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209103901481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:39:04.891645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27467): Terminating (SIGTERM) 10:39:04.931818 run iperf3-srv_10.42.42.10(pid=27468): Terminating (SIGTERM) 10:39:04.972002 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27469): Terminating (SIGTERM) 10:39:05.012081 run iperf3-srv_10.42.42.10(pid=27470): Terminating (SIGTERM) 10:39:05.052184 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27473): Terminating (SIGTERM) 10:39:05.092175 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27476): Terminating (SIGTERM) 10:39:05.132204 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27479): Terminating (SIGTERM) 10:39:05.141523 --- ParallelTerminationStrategy: PID 27467 died... 10:39:05.194999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27467): Terminated: ok {rc=0} 10:39:05.204594 --- ParallelTerminationStrategy: PID 27468 died... 10:39:05.257878 run iperf3-srv_10.42.42.10(pid=27468): Terminated {rc=256} 10:39:05.267423 --- ParallelTerminationStrategy: PID 27469 died... 10:39:05.320589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27469): Terminated: ok {rc=0} 10:39:05.330168 --- ParallelTerminationStrategy: PID 27470 died... 10:39:05.383248 run iperf3-srv_10.42.42.10(pid=27470): Terminated {rc=256} 10:39:05.393357 --- ParallelTerminationStrategy: PID 27473 died... 10:39:05.446677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27473): Terminated: ok {rc=0} 10:39:05.456301 --- ParallelTerminationStrategy: PID 27476 died... 10:39:05.509468 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27476): Terminated: ok {rc=0} 10:39:05.519115 --- ParallelTerminationStrategy: PID 27479 died... 10:39:05.572216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27479): Terminated: ok {rc=0} 10:39:05.662549 bus /gobi_0: Setting Powered False 10:39:06.767773 bus /gobi_0: Setting Powered False 10:39:07.879591 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27477): Process ended prematurely: osmo-stp_10.42.42.5(pid=27477) [trial-2358↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27477)]